M50 into Motorsport

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

e30_singh
E30 Zone Camper
E30 Zone Camper
Posts: 1037
Joined: Sat Feb 11, 2006 11:00 pm
Location: Ilford Essex

Post Thu Jan 04, 2007 9:04 pm

I dnt want to be a forum twat, but i did a search and couldnt really find much, im sure theres loads on here, if someone can point me in the right direction, i would be greatfull.

I am considering buying this motorsport i have spotted but the mileage is very high, so i am considering throwing a m50 lump into it.

Just want to know how straight forward it is etc...
User avatar
Jimbob
E30 Zone Addict
E30 Zone Addict
Posts: 3731
Joined: Sun Jan 09, 2005 11:00 pm
Location: Poole

Post Thu Jan 04, 2007 9:05 pm

Sig link mate
e30_singh
E30 Zone Camper
E30 Zone Camper
Posts: 1037
Joined: Sat Feb 11, 2006 11:00 pm
Location: Ilford Essex

Post Thu Jan 04, 2007 9:09 pm

You are trying to access a restricted area.
maxfield
Old Skooler
Old Skooler
Posts: 15185
Joined: Sat Nov 26, 2005 11:00 pm
Location: Mansfield

Post Thu Jan 04, 2007 9:13 pm

An M50/2 engine (look for non-vanos engines with non-ews wiring loom(E34))

: Inlet manifold, throttle body and throttle cable from E34

: Modification to exhaust manifold - In the words of Brianmoooore: For the exhaust manifolds, I used a standard cast E36 rear manifold and a cast E36 front manifold with the section between where the three primaries meet and the flange removed and welded together.
Then, by chopping up the front pipes of an E36 system and a 325 E30 system and welding the bits together, I connected to the standard 325 E30 system just in front of the gearbox exhaust mount.

: Sump, oil pick up pipe and dipstick from E34 (Is it the same oil pump for E36 and E34?)

: E36 ally engine mount legs

: E34 M50 rubber engine mounts (or so I'm led to believe)

: E30 325i clutch and flywheel (6-7mm off of flywheel)

: E30 325i gearbox (custom gearbox mount/bracket, bend the selector rod 10-15 degrees!)
http://i11.photobucket.com/albums/a155/ ... G32336.jpg

: The above allows for an E30 325i propshaft, and a 3.64 diff at least (pref M3 diff)

: Mk2 golf brake servo with spacer between pushrod and master cylinder

: E30 325i everything else


parts list
Image
Karan
Married to the E30 Zone
Married to the E30 Zone
Posts: 8004
Joined: Mon Jan 10, 2005 11:00 pm
Location: Cheshunt, Hertfordshire

Post Thu Jan 04, 2007 9:13 pm

hi mate

you need the engine/box, custom prop (£130ish), exhaust manifold work, brakke servo change,

thats a start

Karan
Karan
Married to the E30 Zone
Married to the E30 Zone
Posts: 8004
Joined: Mon Jan 10, 2005 11:00 pm
Location: Cheshunt, Hertfordshire

Post Thu Jan 04, 2007 9:13 pm

wll my post was useless
User avatar
Jimbob
E30 Zone Addict
E30 Zone Addict
Posts: 3731
Joined: Sun Jan 09, 2005 11:00 pm
Location: Poole

Post Thu Jan 04, 2007 11:28 pm

It's not a restricted area, it's just a case of e30zone.co.uk or e30zone.net :)

Cheers to maxfield for pasting my link though.

Lol Karan, hey dude! :D
m-dtech
Unapproved Trader caution
Posts: 2068
Joined: Thu Sep 01, 2005 11:00 pm

Post Fri Jan 05, 2007 8:02 am

im doing an m50 install as we speak, i will post pics soon.