I would just pull the fuse, but it's extra weight and taking up space. So what would I need to do to take out the ABS system? I've not had much of a look at it yet, but can I simply take things out and connect things up, or do I need to replace alot of piping?
Also, is it worth anything?
Getting rid of the ABS
Moderator: martauto
-
old_skool
- E30 Zone Team Member

- Posts: 3405
- Joined: Fri Sep 01, 2006 11:00 pm
- Location: Glossersure
Master cylinder needs to be repiped directly to the brake calipers/wheel cylinders. The master cylinder has two pipes coming off it at present, the pipe at the front serves the back brakes, via the ABS servo wheras the pipe at the rear serves the front calipers, again, via the servo iirc.
I'm doing the same conversion on mine at the mo. Does require a fair amount of repiping.
Removing the ABS shoudn't affect the brake force distribution at all. The rear brake setup already has a pressure reducing valve fitted inline.
Not sure what the ABS servo, wheel sensors and ABS ECU would be worth, not much I guess
I'm doing the same conversion on mine at the mo. Does require a fair amount of repiping.
Removing the ABS shoudn't affect the brake force distribution at all. The rear brake setup already has a pressure reducing valve fitted inline.
Not sure what the ABS servo, wheel sensors and ABS ECU would be worth, not much I guess
-
topi
- E30 Zone Newbie

- Posts: 54
- Joined: Mon Aug 08, 2005 11:00 pm
- Location: Leicestershire/Derby
Ah cool, cheers 
