How Easy To Fit Heated Seat Elements?
Moderator: martauto
-
SHAZ325iSPORT
- E30 Zone Addict

- Posts: 2360
- Joined: Sat Mar 26, 2005 11:00 pm
- Location: East London
-
cliffybabe
- Powered by Nelly

- Posts: 10020
- Joined: Sun Dec 18, 2005 11:00 pm
- Location: Croydon
Stuartgallafant has been taling about doing this mod drop him a PM i know he has the elements etc,

Considering Selling the Cabby, looks like its gonna go
-
SHAZ325iSPORT
- E30 Zone Addict

- Posts: 2360
- Joined: Sat Mar 26, 2005 11:00 pm
- Location: East London
-
Demlotcrew
- E30 Zone Team Member

- Posts: 13329
- Joined: Mon Dec 20, 2004 11:00 pm
- Location: East Anglia
On your seats it will be a total pain in the ass, in fact to do it properly the horizontal stitching will need to come out.
Andrew
Andrew
-
SHAZ325iSPORT
- E30 Zone Addict

- Posts: 2360
- Joined: Sat Mar 26, 2005 11:00 pm
- Location: East London
-
Royalratch
- E30 Zone Addict

- Posts: 4921
- Joined: Sat Oct 21, 2006 11:00 pm
- Location: London
It's very, very easy if you have the right tools. I would not even try it without:
Hog Ring Pliers and Hog Rings.
14/16mm electric/powered staple gun.
Both can be bought at Frosts.
You don't even need to take all the fabric/leather off. I have the tools and will lend you them or help you do it as you're in London.
Or I can try and write a step-by-step guide and post that - le me know.
Hog Ring Pliers and Hog Rings.
14/16mm electric/powered staple gun.
Both can be bought at Frosts.
You don't even need to take all the fabric/leather off. I have the tools and will lend you them or help you do it as you're in London.
Or I can try and write a step-by-step guide and post that - le me know.
-
Royalratch
- E30 Zone Addict

- Posts: 4921
- Joined: Sat Oct 21, 2006 11:00 pm
- Location: London
I am after heating elements for leather sport seats if anyone has them.
SHAZ325iSPORT - If you order the parts, make sure to specify the correct seat and fabric you have. I'm guessing sports/leather.
SHAZ325iSPORT - If you order the parts, make sure to specify the correct seat and fabric you have. I'm guessing sports/leather.
-
SHAZ325iSPORT
- E30 Zone Addict

- Posts: 2360
- Joined: Sat Mar 26, 2005 11:00 pm
- Location: East London
-
Royalratch
- E30 Zone Addict

- Posts: 4921
- Joined: Sat Oct 21, 2006 11:00 pm
- Location: London
Cool. Will do.
I'll jot something down and get it up soon.
PM when you're ready.
I'll jot something down and get it up soon.
PM when you're ready.
-
SHAZ325iSPORT
- E30 Zone Addict

- Posts: 2360
- Joined: Sat Mar 26, 2005 11:00 pm
- Location: East London
-
Royalratch
- E30 Zone Addict

- Posts: 4921
- Joined: Sat Oct 21, 2006 11:00 pm
- Location: London
Maybe better if I help you do yours, you photgraph it and maybe the zone can use it as a How To?
Either way it'll get done - 3 hours-ish.
Either way it'll get done - 3 hours-ish.
-
SHAZ325iSPORT
- E30 Zone Addict

- Posts: 2360
- Joined: Sat Mar 26, 2005 11:00 pm
- Location: East London
-
Demlotcrew
- E30 Zone Team Member

- Posts: 13329
- Joined: Mon Dec 20, 2004 11:00 pm
- Location: East Anglia
Hello????????
Didnt i just say it would be very hard?
Royalratch look at the stitching on his seats, ive fitted many of these and i can assure you that on the seats in his cab fitting the elements will be far from very very easy! But what do i know right???
3-hours ish
Andrew
Didnt i just say it would be very hard?
Royalratch look at the stitching on his seats, ive fitted many of these and i can assure you that on the seats in his cab fitting the elements will be far from very very easy! But what do i know right???
3-hours ish
Andrew
-
Royalratch
- E30 Zone Addict

- Posts: 4921
- Joined: Sat Oct 21, 2006 11:00 pm
- Location: London
So? Nobody's questioning what you know, I did mine and it was very very easy.
Is that okay with you?
I followed the instructions that came with the BMW kit and it was straight forward.
The loom in the car will take another hour or so tho.
From his pix, if it's those red sports seats, they look just like mine.
What's the issues with the stitching?
____________
Remove seats.
Break all hog clips (also known as ring clips) off and unhook the leather ONLY from the central trim (not the the side bolsters) and also release the leather from the bent tabs under the base.
Remove extending thigh support (small circlip underneath, then slide it off it's rail)
Remove the seat back and do the same for the central panel, again only for the central cushion, not the side bolsters.
Leave the central tension clips/stitches (the bit's at the at the seam running across the seats that give the correct tension to the trim) connected to the foam.
Cut slits in in the foam of each panel, feed the heater elements through so they are nice and tight across the foam. Be careful and get the width of the slits and the cuts correct so you don't stress the element. Clip/ziptie the cable to the base of the seat underneath..
Then just do a reversal.
Fasten the leather back around the tabs and staple/hogclip in the relevant areas.
Unless he has some weird non-factory seats, it shouldn't take more than 3 hours.
Is that okay with you?
I followed the instructions that came with the BMW kit and it was straight forward.
The loom in the car will take another hour or so tho.
From his pix, if it's those red sports seats, they look just like mine.
What's the issues with the stitching?
____________
Remove seats.
Break all hog clips (also known as ring clips) off and unhook the leather ONLY from the central trim (not the the side bolsters) and also release the leather from the bent tabs under the base.
Remove extending thigh support (small circlip underneath, then slide it off it's rail)
Remove the seat back and do the same for the central panel, again only for the central cushion, not the side bolsters.
Leave the central tension clips/stitches (the bit's at the at the seam running across the seats that give the correct tension to the trim) connected to the foam.
Cut slits in in the foam of each panel, feed the heater elements through so they are nice and tight across the foam. Be careful and get the width of the slits and the cuts correct so you don't stress the element. Clip/ziptie the cable to the base of the seat underneath..
Then just do a reversal.
Fasten the leather back around the tabs and staple/hogclip in the relevant areas.
Unless he has some weird non-factory seats, it shouldn't take more than 3 hours.


