hey zone,
I've Got a 89 320i and when i go into the car and turn on the ignition without starting the car the needle on the coolant temprature guage goes straight into the red and stays there for bout 15secs then goes back in2 the blue section of the guage to tell me the engine is cold, i then turn the ignition back off and wait 2mins or so and turn the ignition back on and same situation the needle goes in2 the red section of the guage and stays there for 15 secs and goes back into the blue section of the guage this is constantly happening without me starting the engine up, does any1 know what is wrong and how to fix this problem ?
thanks guys
coolant temprature guage
Moderator: martauto
-
wildeian
- E30 Zone Regular

- Posts: 851
- Joined: Thu Mar 09, 2006 11:00 pm
- Location: Colchester, Essex
I had a similar problem, but my needle would stay in the red after startup for about 15 minutes, then drop to normal. Although I never changed them, I was told it was the batteries in the cluster that control the service lights. When they are on their way out they affect the temp gauge.
HTH,
Ian
HTH,
Ian

