WHERE CAN I GET A VERNIER PULLEY FOR MY 2.7 BUILD?

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

User avatar
DORAS
E30 Zone Newbie
E30 Zone Newbie
Posts: 185
Joined: Tue Oct 25, 2005 11:00 pm
Location: Salisbury, Wiltshire

Post Fri Dec 29, 2006 5:59 pm

I need to get an adjustable vernier pulley for my m20 2.7 project it woll be going on a schrik cam.

Can anyone help?

Rich
kam-325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 4851
Joined: Tue Sep 27, 2005 11:00 pm
Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!

Post Fri Dec 29, 2006 6:10 pm

Demon Tweaks ?
Pete don't care about colour, He would shag a rainbow if he could find the end of it....
Image
ed325i
E30 Zone Addict
E30 Zone Addict
Posts: 4146
Joined: Mon Jan 10, 2005 11:00 pm

Post Fri Dec 29, 2006 6:14 pm

User avatar
Jimbob
E30 Zone Addict
E30 Zone Addict
Posts: 3731
Joined: Sun Jan 09, 2005 11:00 pm
Location: Poole

Post Fri Dec 29, 2006 6:16 pm

Halfords.
E30Adam
Married to the E30 Zone
Married to the E30 Zone
Posts: 8483
Joined: Sun Dec 19, 2004 11:00 pm
Location: Bournemouth

Post Fri Dec 29, 2006 7:37 pm

Yeah agreed Jim, I got my Kent Cams verner from Halfords, they'll have to oder it in though and they need modding ever so slightly.
Image

2.8 Litre M20 powered - Essen Sie meinen Staub biatch
User avatar
--alpina--
E30 Zone Regular
E30 Zone Regular
Posts: 787
Joined: Fri Aug 04, 2006 11:00 pm
Location: somewhere in timbuktu

Post Sat Dec 30, 2006 1:01 am

hi all, just a quick question, the vernier pulley is the sole part of advancing a performance cam for the 0-60?? thats the idea i had, as on performance cams the power bandwidth takes effect around 3-3500 rpms,, but by advancing it it would effectivly come cut in earlier.. this way you lose top end... also a way to time up bottom to top parts of engine as regards to performance the timing wouldnt match (timing marks), is there any other benefits of a vernier pulley???


Thanks

J.
Uk`s first E21 - Forum -

http://www.e21.ownforum.org
Templ8e30
E30 Zone Addict
E30 Zone Addict
Posts: 2801
Joined: Mon Jan 10, 2005 11:00 pm
Location: Ashton-under-Lyne, Lancashire

Post Sat Dec 30, 2006 12:17 pm

The whole idea of a vernier pulley is to allow you to set the timing perfectly.

Nowt to do with 0-60 times.

For example, if you build a 2.7 using 325i pistons the block needs to be shaved. This means that the cam pulley is closer to the crank pulley giving retarded cam timing. A vernier will be needed to correct the cam timing.

Cheers,

Iain T
Image
2007 Mazda 6 2.0 estate
Political Correctness - A concept based on the idea that its possible to pick up a turd by the clean end !
User avatar
chu346
E30 Zone Addict
E30 Zone Addict
Posts: 2403
Joined: Mon Jan 10, 2005 11:00 pm
Location: Leicester

Post Sat Dec 30, 2006 3:15 pm

What is the proceddure for setting the timing with one of these?
Templ8e30
E30 Zone Addict
E30 Zone Addict
Posts: 2801
Joined: Mon Jan 10, 2005 11:00 pm
Location: Ashton-under-Lyne, Lancashire

Post Sat Dec 30, 2006 4:48 pm

You need the spec from the cam manufacturer and a timing disc. To get it spot on you also need a DTI (dial test indictaor) to detect true TDC and maximum lift.

Have a look at http://www.symuli.com/vw/camp1.html and
http://www.symuli.com/vw/camp2.html

also http://www.4cycle.com/karting/html/timi ... eeing.html

Cheers,

Iain T
Image
2007 Mazda 6 2.0 estate
Political Correctness - A concept based on the idea that its possible to pick up a turd by the clean end !
User avatar
--alpina--
E30 Zone Regular
E30 Zone Regular
Posts: 787
Joined: Fri Aug 04, 2006 11:00 pm
Location: somewhere in timbuktu

Post Sun Dec 31, 2006 1:32 am

Cheers guys, that exactly what i thouht...i had a kent vernier pulley and i advanced it so i can get 0-60, and it did make a massive difference, thats when i had distributor in the car, but now a motronic setup so i couldnt put the pulley on, totally different....



Cheers

J.
Uk`s first E21 - Forum -

http://www.e21.ownforum.org
kam-325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 4851
Joined: Tue Sep 27, 2005 11:00 pm
Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!

Post Sun Dec 31, 2006 1:44 am

How does shaving the block alter the timimg ?

i can understand using the vernier to advance/retard the cam......but why do you need one in the first place ?
Pete don't care about colour, He would shag a rainbow if he could find the end of it....
Image
User avatar
Jimbob
E30 Zone Addict
E30 Zone Addict
Posts: 3731
Joined: Sun Jan 09, 2005 11:00 pm
Location: Poole

Post Sun Dec 31, 2006 2:22 am

Shaving the block would alter the distance between the pulleys on the cambelt...surely that speaks for itself about timing being out.

The vernier pulley is adjustable - i.e if the block is shaved, there is slack in the cambelt due to the slightly shorter distance, increase the size of the vernier pulley to overcome this
kam-325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 4851
Joined: Tue Sep 27, 2005 11:00 pm
Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!

Post Sun Dec 31, 2006 2:52 am

But is the timing governed by the gearing ratio of the pulleys and not the distance between them ?

if ive got 2 pulleys, raito 4:1, regardless of the distance between them, the raito will still be 4:1 ?

Is it caused by the teeth on the belt not lining up ?
Pete don't care about colour, He would shag a rainbow if he could find the end of it....
Image
mrLEE30
E30 Zone Team Member
E30 Zone Team Member
Posts: 6589
Joined: Tue Jan 18, 2005 11:00 pm
Location: Sweating buckets in Bahrain

Post Sun Dec 31, 2006 5:48 am

i am with Kam on this, the pulley does not affect timing, but only allows you to take up the slack in the belt, the timing is fixed by the teeth/belt relationship, otherwise this would mean if i shortened the swingarm on my bike (without removing the chain) and used the same chain/sproket combination the gearing would change..... no i did not think so either!! i would however have a slack chain so remove links (or shorter timing belt) or fit a device to take up the slack (vernier pulley)

mrlee
Image
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Sun Dec 31, 2006 11:19 am

Vernier pulley is necessary to take up the slack in the belt on the tension side caused by skimming the head or block. Tensioner pulley adjusts to take up the slack on the return side of the belt, plus the slack from the tension side transferred there by the vernier pulley.
If the crank and cam pulleys, and the tensioner were locked in place before any skimming was done, the belt would be slack on both sides when you put it back on. Slackening off the tensioner bolts would allow the slack to be taken up on that side, but not the tension side, so the outside of the vernier pulley is then turned without moving the centre to transfer this slack to the return side where the tensioner spring can take this up as well.
I suppose if you skimmed off an amount equal to the pitch of the belt teeth, then a vernier pulley wouldn't be needed.
Any thoughts on belt tension? The spring won't be pushing as hard on the tensioner in its new position.
kam-325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 4851
Joined: Tue Sep 27, 2005 11:00 pm
Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!

Post Sun Dec 31, 2006 4:13 pm

Ah...got it now.........

Fit the vernier, turn vernier "back" to transfer all slack in belt to the tensioner side.....without affecting the position of the cam......
Pete don't care about colour, He would shag a rainbow if he could find the end of it....
Image
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Sun Dec 31, 2006 9:28 pm

kam-325i wrote: Fit the vernier, turn vernier "back" to transfer all slack in belt to the tensioner side.....without affecting the position of the cam......
Not really - that's just to illustrate what you're doing. Correct way is with dial gauges etc., as mentioned above.