water pump help

Need technical Q/A then you're in the right place

Moderator: martauto

noney82
E30 Zone Camper
E30 Zone Camper
Posts: 1102
Joined: Thu Apr 27, 2006 11:00 pm
Location: manchester, stockport

Post Sat Dec 30, 2006 5:52 pm

water pump as about to go on me the bearing is giving in on me, iv got 325 1991, can anyone give me some advice on how easy/hard this is as im doing it myself. so any pointers will be great. Also if anyone has a spare pump and is local iv got some cash waiting. im sick off this car now they always go wrong at the wrong times. if it would of done it this morning i would of been ok
Chris-W
E30 Zone Team Member
E30 Zone Team Member
Posts: 7219
Joined: Tue May 24, 2005 11:00 pm
Location: South Cheshire

Post Sat Dec 30, 2006 7:08 pm

Don't get a second hand pump - they £30ish from ECP. You should take the opportunity to do the belt whilst you're at it, as it all has to come off anyway.
Image
noney82
E30 Zone Camper
E30 Zone Camper
Posts: 1102
Joined: Thu Apr 27, 2006 11:00 pm
Location: manchester, stockport

Post Sat Dec 30, 2006 7:12 pm

is it run by the cam belt?
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Sat Dec 30, 2006 7:21 pm

noney82 wrote: im sick off this car now they always go wrong at the wrong times. if it would of done it this morning i would of been ok
You have one of the best engineered cars known to mankind. One, that properly maintained, will be far more reliable than the average car around, including brand new ones.
Water pump is a service item and should have been changed at least with every second change of the timing belt, so, as long as pumps to OE quality have been used, a water pump should never fail in service.
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Sat Dec 30, 2006 7:23 pm

noney82 wrote:is it run by the cam belt?
No, this is proper engineering. Only crap like Vauxhall does things like that.
Chris-W
E30 Zone Team Member
E30 Zone Team Member
Posts: 7219
Joined: Tue May 24, 2005 11:00 pm
Location: South Cheshire

Post Sat Dec 30, 2006 7:26 pm

Brianmoooore wrote:You have one of the best engineered cars known to mankind. One, that properly maintained, will be far more reliable than the average car around, including brand new ones.
I heard background music when I read that!
Image
Dan318-is
Married to the E30 Zone
Married to the E30 Zone
Posts: 8006
Joined: Wed Jul 06, 2005 11:00 pm
Location: Surrey/London

Post Sat Dec 30, 2006 7:28 pm

Chris-W wrote:
Brianmoooore wrote:You have one of the best engineered cars known to mankind. One, that properly maintained, will be far more reliable than the average car around, including brand new ones.
I heard background music when I read that!
Sounds like BMW propaganda out of the e30 hal machine that is brianmooore. Pure genius
noney82
E30 Zone Camper
E30 Zone Camper
Posts: 1102
Joined: Thu Apr 27, 2006 11:00 pm
Location: manchester, stockport

Post Sat Dec 30, 2006 7:47 pm

so i dont have to worry about taking the cam belt off?
i know the engines are good iv done so much to this car she has taken so much abuse from me and still keeps going. id do the cam belt but worried about flucking it up and doing the engine in. is my engine the m20?
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Sat Dec 30, 2006 7:57 pm

Your engine is a M20.
You don't have to change the cambelt, but unless it's almost new, it would be false economy not too. They don't cost a lot, and you have to do most of the dismantling involved to change the pump. You have to disturb the tensioner to change the pump as well.
noney82
E30 Zone Camper
E30 Zone Camper
Posts: 1102
Joined: Thu Apr 27, 2006 11:00 pm
Location: manchester, stockport

Post Sat Dec 30, 2006 8:00 pm

how easy is the belt to do? does the hanes tell how to do it in?
noney82
E30 Zone Camper
E30 Zone Camper
Posts: 1102
Joined: Thu Apr 27, 2006 11:00 pm
Location: manchester, stockport

Post Sat Dec 30, 2006 8:01 pm

do i need any special tools?
noney82
E30 Zone Camper
E30 Zone Camper
Posts: 1102
Joined: Thu Apr 27, 2006 11:00 pm
Location: manchester, stockport

Post Tue Jan 02, 2007 4:31 pm

im going to atempt to do the water pump and cam belt any pointers i should take into consideration
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Tue Jan 02, 2007 5:07 pm

Haynes covers it OK.
Don't move the crank or cam after the belt's off. The belt WILL go between the bottom cover and the crank cam sprocket.
Don't forget to tighten the tensioner mounting bolts after you've turned the engine over a couple of turns to let the spring to its job.
Double check the timing marks after you've fitted the belt.
Don't over tighten anything that screws into alloy.
Jon_Bmw
Dangerous when thinking
Dangerous when thinking
Posts: 7604
Joined: Tue Jan 11, 2005 11:00 pm
Location: Salisbury

Post Tue Jan 02, 2007 5:13 pm

And at the end, turn it over with a ratchet/breaker bar on the crank, don't just jump in and turn it on. This way you can tell if you have timed it up wrong and you won't have 12 bent valves on your hands. Shouldn't be an issue, but always worth a double check i think.
noney82
E30 Zone Camper
E30 Zone Camper
Posts: 1102
Joined: Thu Apr 27, 2006 11:00 pm
Location: manchester, stockport

Post Tue Jan 02, 2007 5:16 pm

thank you guys, in the haynes it says about marking distibutor terminal 1 what this mean