help with clutch please
Moderator: martauto
-
JonniBoi
- E30 Zone Newbie

- Posts: 10
- Joined: Sat Aug 26, 2006 11:00 pm
i've just changed my slave cylinder on my 318i, bled the whole system through and i still have a problem. i can put the clutch down and get it in gear then the car starts to move off on its own with the clutch pedal still down!!
somebody please help me!
-
zaust
- Zone day release
- Posts: 13007
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Somewhere in Hertfordshire , or press Ctrl + W
-
gazza
- E30 Zone Camper

- Posts: 1266
- Joined: Tue Feb 08, 2005 11:00 pm
- Location: north london/herts
as above i would always change both at the same time prob was the master cylinder in the first place and not the slave cylinder
-
Chris-W
- E30 Zone Team Member

- Posts: 7219
- Joined: Tue May 24, 2005 11:00 pm
- Location: South Cheshire
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
And debris from the master will rapidly destroy the new slave.Chris-W wrote:As above, a new slave will achieve nothing if the master isn't sending the pressure.
-
JonniBoi
- E30 Zone Newbie

- Posts: 10
- Joined: Sat Aug 26, 2006 11:00 pm
thanks for the advice lads, the slave needed doing anyway as the seal had gone
-
JonniBoi
- E30 Zone Newbie

- Posts: 10
- Joined: Sat Aug 26, 2006 11:00 pm
help again please. i changed the master cylinder and still the same problem!! somebody help, any ideas
-
Martinaston
- E30 Zone Addict

- Posts: 3749
- Joined: Mon Mar 14, 2005 11:00 pm
- Location: London
Are you loosing fluid ?
There is NO nucleus.
-
wildeian
- E30 Zone Regular

- Posts: 851
- Joined: Thu Mar 09, 2006 11:00 pm
- Location: Colchester, Essex
Maybe the rod in the slave cylinder is mis-placed??


