Lowering my E30 Touring
Moderator: martauto
-
THEHOOD
- E30 Zone Regular

- Posts: 272
- Joined: Tue Aug 22, 2006 11:00 pm
- Location: Gosport
i have a 1988 E30 Touring 325i. it's completely standard but i'd like to lower it. can i just buy some lowering springs for it without changing the shocks? where is the best/cheapest place to buy springs from?
Thanks
Thanks
-
Cotty
- Hartge Crew
- Posts: 5926
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Orpington, Kent
For a start you need to think about how low you want it
This is mine with a 60/40 drop

I bought some KW springs and shocks from a fellow Zoner for £250 a while back. To be honest my set up is a bit harsh but I think they are more of a track set up rater than a road set up. I have heard good things about the H&R set up.
You also have to think about what you want, ie is it just the look then you could probably just go with lowered springs but if you want handling then best go for a set of matched springs and shocks.
Talk to Sal (M5pilot) who runs the Zone shop, he should be able to point you in the right direction
This is mine with a 60/40 drop

I bought some KW springs and shocks from a fellow Zoner for £250 a while back. To be honest my set up is a bit harsh but I think they are more of a track set up rater than a road set up. I have heard good things about the H&R set up.
You also have to think about what you want, ie is it just the look then you could probably just go with lowered springs but if you want handling then best go for a set of matched springs and shocks.
Talk to Sal (M5pilot) who runs the Zone shop, he should be able to point you in the right direction

-
Pal318is
- E30 Zone Addict

- Posts: 3494
- Joined: Fri Jan 14, 2005 11:00 pm
- Location: Kop End - Bedford
You can get them from the shop in the HoodTHEHOOD wrote:i have a 1988 E30 Touring 325i. it's completely standard but i'd like to lower it. can i just buy some lowering springs for it without changing the shocks? where is the best/cheapest place to buy springs from?
Thanks
Seriously tho' decent springs are available from the zone shop, Eibach, H&R etc
Better to get a decent set imho, if not then somewhere like euro Car Parts or German-Swedish&French will do a chaep set.
HTH
Welcome to the zone too.
Pal
Pal
[img]http://
M42's Run in the Family...The kids sayin 'YNWA'
[img]http://
M42's Run in the Family...The kids sayin 'YNWA'
-
Jesus325iTouring
- Frog freak !

- Posts: 11356
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Omnipresent!
Cotty your Touring dun arf sit nice


X5 V8 for thrills, CRV for chills, Range Rover P38 V8 for sooooo much aggravation...
-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
heres my touring on a 60/40 drop, but it's a bit lower than that really. H&R springs, Bilstein shocks. another good setup option. Bit low and hard ride but i don't mind that.

if your going lower than 40mm then u need the shocks to match. I'd only keep my standard shocks on a 40mm drop if they were in excellent condition too

if your going lower than 40mm then u need the shocks to match. I'd only keep my standard shocks on a 40mm drop if they were in excellent condition too
-
Jesus325iTouring
- Frog freak !

- Posts: 11356
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Omnipresent!
Mine would be a nightmare that low,no way I could hitch up my trailer,the rear wheels would be up in the archesSimon13 wrote:heres my touring on a 60/40 drop, but it's a bit lower than that really. H&R springs, Bilstein shocks. another good setup option. Bit low and hard ride but i don't mind that.
if your going lower than 40mm then u need the shocks to match. I'd only keep my standard shocks on a 40mm drop if they were in excellent condition too
Not to mention the odd drive over "The Plains"!

X5 V8 for thrills, CRV for chills, Range Rover P38 V8 for sooooo much aggravation...
-
Jesus325iTouring
- Frog freak !

- Posts: 11356
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Omnipresent!
PS Simon is that the Touring youonly paid a few hundred quid for? Looks good 

X5 V8 for thrills, CRV for chills, Range Rover P38 V8 for sooooo much aggravation...
-
Cotty
- Hartge Crew
- Posts: 5926
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Orpington, Kent
CheersJesus325iTouring wrote:Cotty your Touring dun arf sit nice![]()
![]()
Why is it a bit "lower than that really"Simon13 wrote:heres my touring on a 60/40 drop, but it's a bit lower than that really.

-
Cotty
- Hartge Crew
- Posts: 5926
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Orpington, Kent


I just wanted to post the two pics next to each other to see the difference between two 60/40 drops to get them on the same screen, rather than scrolling up and down. Still think Simons looks like a 60mm drop on the back

-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
it's on H&R cupkit springs for a *cough a saloon. Plus for some reason these particular bilsteins i have seem help lower the car! dunno why.
Rog this car is a tarmac terrorist! speed humps are it's enemy but the slow approach saves me there. Yeah few hundred quid, amazing what a wash, a set of wheels and lowering it does for the appearance!
It's a council drop i know and it wears the tyres bla bla, but i like it and it corners nicely too
Rog this car is a tarmac terrorist! speed humps are it's enemy but the slow approach saves me there. Yeah few hundred quid, amazing what a wash, a set of wheels and lowering it does for the appearance!
It's a council drop i know and it wears the tyres bla bla, but i like it and it corners nicely too
-
Cotty
- Hartge Crew
- Posts: 5926
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Orpington, Kent
I have not had a problem with speed ramps, but caught the spoiler for the first time last week on a steep exit from a petrol station. Wont be using them again.Simon13 wrote:
Rog this car is a tarmac terrorist! speed humps are it's enemy but the slow approach saves me there.
I remember Sal put saloon or cab springs on his touring and it really sat low with lots of camber on the rear wheels. I think the tourers have a bit more weight at the rear than the other models

-
Jesus325iTouring
- Frog freak !

- Posts: 11356
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Omnipresent!
LOL!Simon13 wrote:it's on H&R cupkit springs for a *cough a saloon. Plus for some reason these particular bilsteins i have seem help lower the car! dunno why.
Rog this car is a tarmac terrorist! speed humps are it's enemy but the slow approach saves me there. Yeah few hundred quid, amazing what a wash, a set of wheels and lowering it does for the appearance!
It's a council drop i know and it wears the tyres bla bla, but i like it and it corners nicely too
We all gotta do a bit of council now and then,my bit of council for the year is now gone,the 5 Series breaker in an other wise picturesque setting finally been fragged and scrapped.

X5 V8 for thrills, CRV for chills, Range Rover P38 V8 for sooooo much aggravation...
-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
It is more like a 60mm drop yes, but most cupkits are 60mm allround i don't know why they say 40mm rear really. Every saloon i've had has sat like the touring also. Alpina in my sig is on the same shock/springs combo and that doesn't look 60/40 either.
they do hence the slightly better weight distribution sp?! near 50/50
those extra kgs of glass and metal on the back axle make a difference compared to driving a saloon imo. They feel much more stable at high speeds compared to a saloon
Tourings seem to lurch into the corner but once they settle they hug the road well.
they do hence the slightly better weight distribution sp?! near 50/50
those extra kgs of glass and metal on the back axle make a difference compared to driving a saloon imo. They feel much more stable at high speeds compared to a saloon
Tourings seem to lurch into the corner but once they settle they hug the road well.
-
Cotty
- Hartge Crew
- Posts: 5926
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Orpington, Kent
Oh go on any excuse to post another pic of my car with the new stripes, sorry i just love my baby 



-
Cotty
- Hartge Crew
- Posts: 5926
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Orpington, Kent
They don't with the H&R anti roll barsSimon13 wrote: Tourings seem to lurch into the corner but once they settle they hug the road well.

-
Jesus325iTouring
- Frog freak !

- Posts: 11356
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Omnipresent!
I'll have 90mm rear drop and 90mm front raise tomorrow,off on holiday!

X5 V8 for thrills, CRV for chills, Range Rover P38 V8 for sooooo much aggravation...
-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
hehe! 15mpg again for u then Rog!
cotty i'm sorting this soon with some of my uprated anti roll bars which are on "loan" on another zoners car lol, plus a strut brace should help no end.
Have u tracked your touring at all? would be interesting to hear how they are on track
i love the stripes but your car is crying out for the 16's! they are a lovely looking rim and would complete the look on your car i feel!
I'll get some H&R's when the time comes for them on the alpina. I like the fact they are black and look stock when the car is on the ramps!
cotty i'm sorting this soon with some of my uprated anti roll bars which are on "loan" on another zoners car lol, plus a strut brace should help no end.
Have u tracked your touring at all? would be interesting to hear how they are on track
i love the stripes but your car is crying out for the 16's! they are a lovely looking rim and would complete the look on your car i feel!
I'll get some H&R's when the time comes for them on the alpina. I like the fact they are black and look stock when the car is on the ramps!
-
Cotty
- Hartge Crew
- Posts: 5926
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Orpington, Kent
Poor touringJesus325iTouring wrote:I'll have 90mm rear drop and 90mm front raise tomorrow,off on holiday!
If I hooked a house on the back if mine I think it might move a mm or two.
I keep running over empty crist packets and think, cheese & onion, ready salted etc etc

-
Jesus325iTouring
- Frog freak !

- Posts: 11356
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Omnipresent!
5 Passengers,a dog + trailer,so yup,15mpg is probably on the cards,oh and not to mention all the tools i've just mention in the pub section!Simon13 wrote:hehe! 15mpg again for u then Rog!
Cotty180 wrote:
If I hooked a house on the back if mine I think it might move a mm or two.![]()
I keep running over empty crist packets and think, cheese & onion, ready salted etc etc
I think I need new shocks again,i've only got to put a pack of fags in the boot and it drops!

X5 V8 for thrills, CRV for chills, Range Rover P38 V8 for sooooo much aggravation...
-
Cotty
- Hartge Crew
- Posts: 5926
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Orpington, Kent
Never tracked it, its standard (engine wise) apart from the mild Zone chip. I hear tourings are really good on track because of the 50/50 weight distribution. However I bought my touring to do long motorwars trecks when i was karting and ended up with an auto due to overall condition and not sure how track freindly an auto would be.Simon13 wrote: Have u tracked your touring at all? would be interesting to hear how they are on track
I looked for over 2 years and 16" either went for silly money or were basket cases that stilll went for silly money. I spentSimon13 wrote: i love the stripes but your car is crying out for the 16's! they are a lovely looking rim and would complete the look on your car i feel!
£280 Wheels & tyres (195/45/15)
£180 Refurb
£200 new correct size tyres
------
£660 Total
Still don't tire of taking corners at sillly speedsSimon13 wrote:I'll get some H&R's when the time comes for them on the alpina. I like the fact they are black and look stock when the car is on the ramps!

-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
i know i've done that on alpina's!
£450 for a shagged set of 7's and 8's
£200 on refurb, one i had done again at lepsons because spit and polish didn't do it properly! £45
£45 on centre badges
£30 odd on rubber rings and locking centre caps etc
£160 on 2 tyres
thats £650 on buying them and refurbing them, infact that cost me £930 odd! supply and demand i am afraid
i sold them for £550, now that p!sses me off! I'm sure Mahmood doesn't mind though, they look nice on his cab
your lucky with plastic centre caps on hartges! which will melt on track so take the front ones off if u ever do it! lol cheap sh!t
£450 for a shagged set of 7's and 8's
£200 on refurb, one i had done again at lepsons because spit and polish didn't do it properly! £45
£45 on centre badges
£30 odd on rubber rings and locking centre caps etc
£160 on 2 tyres
thats £650 on buying them and refurbing them, infact that cost me £930 odd! supply and demand i am afraid
i sold them for £550, now that p!sses me off! I'm sure Mahmood doesn't mind though, they look nice on his cab
your lucky with plastic centre caps on hartges! which will melt on track so take the front ones off if u ever do it! lol cheap sh!t
-
Cotty
- Hartge Crew
- Posts: 5926
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Orpington, Kent
Dave or d6dphSimon13 wrote:£45 on centre badges
http://www.e30zone.co.uk/modules.php?na ... ile&u=6535
sorted me out some new centers
To be honest im happy with the 15", they were the size that BMW designed the car to run on and the 15" have locking center caps that the 16" do not have, so extra security

-
Skip
- E30 Zone Regular

- Posts: 309
- Joined: Fri Apr 15, 2005 11:00 pm
- Location: Norfolk
I have just lowered my 325i Touring on -40mm Kilen springs - I used new standard shocks too... The ride is actually very good, not too crashy at all, although it may not be low enough for some


ex-325i Touring
-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
the rear looks way to high for -40mm?
-
Cotty
- Hartge Crew
- Posts: 5926
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Orpington, Kent
it may need time to settle a bit

-
Skip
- E30 Zone Regular

- Posts: 309
- Joined: Fri Apr 15, 2005 11:00 pm
- Location: Norfolk
I have only done 50 miles or so in it so as Cotty says it may take time to settle - has anyone else had their car lowered and it take a bit of time to fully drop? 
ex-325i Touring
-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
they do take time to settle but only 10mm or so and it won't take many miles
-
M5pilot
- E30 Zone Addict

- Posts: 4968
- Joined: Sun Jan 30, 2005 11:00 pm
- Location: Luton
Cotty - your kit is FK, not KW from what Ant told me.
KW's are not that hard and give a true 60/40 lowering.
My Touring exactly like Simon's when I had a saloon cup kit on it. Changing the the Cabriolet Cup kit bought it up to a true 40mm rear.
Sal
KW's are not that hard and give a true 60/40 lowering.
My Touring exactly like Simon's when I had a saloon cup kit on it. Changing the the Cabriolet Cup kit bought it up to a true 40mm rear.
Sal
-
Cotty
- Hartge Crew
- Posts: 5926
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Orpington, Kent
Ok...........so what on earth is FK, i could have sworn it said KW on the box which has now been binnedM5pilot wrote:Cotty - your kit is FK, not KW from what Ant told me.
If you need your filling loosened ill give you a ride


