Wheel Tracking

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

User avatar
alan325i
E30 Zone Regular
E30 Zone Regular
Posts: 369
Joined: Mon Feb 14, 2005 11:00 pm
Location: Yardley, Birmingham

Post Thu Dec 28, 2006 4:47 pm

What a nightmare im having trying to get my wheels tracked after replacing all running gear :x

Took it to 4 tyre places and a BMW dealer so far

Place 1 - oh we cant do that as its been lowered

Place 2 - we dont have the right equipment

Place 3 - Has to be done by main dealer

Place 4 - Oh cant do it, it has to be weighted

Place 5 - BMW, Oh yes we can do that but its going to cost you £250 + VAT for us to set up the machines 8O (aint getting done there, must think im mental)

But after 3 hours i have managed to find a place 20 odd miles away who can do it for only £29 :D Will be there first thing tomorrow morning :D

Oh the fun of owning a BMW but wouldnt change it for any other car :D
Image
smithy318i
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5797
Joined: Thu Apr 28, 2005 11:00 pm
Location: Tyne & Wear

Post Thu Dec 28, 2006 5:08 pm

I think Dazleeds had the same problem recently. 250 takes the piss tho!
Image
Pal318is
E30 Zone Addict
E30 Zone Addict
Posts: 3494
Joined: Fri Jan 14, 2005 11:00 pm
Location: Kop End - Bedford

Post Thu Dec 28, 2006 5:13 pm

£29 is a result... 8)

There's a place just down the road from me who do it with a computerised system, (K something or other) anyway it costs about £80-100 I think, I don't know for sure as it's been a while since I used them. But the price does include adjusting the cambers too.

Pal
Pal

Image[img]http://Image
M42's Run in the Family...The kids sayin 'YNWA'
User avatar
FlashBastd
E30 Zone Newbie
E30 Zone Newbie
Posts: 233
Joined: Sat Aug 13, 2005 11:00 pm
Location: West Yorks

Post Thu Dec 28, 2006 9:18 pm

Why are these so complicated to do? Is it because the cars in question have been lowered?

Can't anywhere with geometry kit do it?
1993 E30 318i Lux Auto Touring - SOLD
2001 Ford Mondeo 2.5 Zetec-S 5dr - SOLD
2004 Lexus IS300 Limited Edition Auto - SOLD
2005 Honda CR-V 2.0i Executive Auto
2001 Ford Puma 1.7i Black
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Thu Dec 28, 2006 9:48 pm

Firstly, because your car has been lowered they find it difficult to get it up the ramps on their poxy cheapo 4 post lift that is not sunk into the concreate floor. Secondly they will want to put the equipment on the rear wheels aswell because they can charge you more for this, again because your car is lowered they cant get their gear inbetween the arch and tyre even though its not necessary for front wheel alignment (tracking).

£29 sounds ok, I pay £20 at the garage 2 mins walk from my front door. Proper sunken lift and lazer equipment.

Pal, I take it you have some nice expensive camber adjusting plates on your front strut tops?
Dan318-is
Married to the E30 Zone
Married to the E30 Zone
Posts: 8006
Joined: Wed Jul 06, 2005 11:00 pm
Location: Surrey/London

Post Thu Dec 28, 2006 9:52 pm

You need to find a garage that preferably does not use laser equipment. You can laugh all you like but the correct way to track a car is with two equal weights and some fishing line. You can laugh all you like but every single race team in the world uses this method; and that includes F1; you just never see it because it is not 'glamorous'. Look for a place that has four metal plates which get placed under your wheels and use thin wire and levels.

HTH
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Thu Dec 28, 2006 10:36 pm

How is fishing line going to measure the toe of the front wheels? :?
Pal318is
E30 Zone Addict
E30 Zone Addict
Posts: 3494
Joined: Fri Jan 14, 2005 11:00 pm
Location: Kop End - Bedford

Post Thu Dec 28, 2006 11:11 pm

DanThe wrote: Pal, I take it you have some nice expensive camber adjusting plates on your front strut tops?
No it don't, i was under the impression that the camber could be adjusted on the rear :? which was what i meant...kick me down if i'm wrong :o:

Pal
Pal

Image[img]http://Image
M42's Run in the Family...The kids sayin 'YNWA'
kam-325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 4851
Joined: Tue Sep 27, 2005 11:00 pm
Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!

Post Thu Dec 28, 2006 11:23 pm

Rear suspension geomerty on a E30 is not adjustable with OEM fittings.......
Pete don't care about colour, He would shag a rainbow if he could find the end of it....
Image
Simon13
The longest resto in the world !
Posts: 22697
Joined: Mon Jan 10, 2005 11:00 pm
Location: Camberley, Surrey don't u know

Post Fri Dec 29, 2006 12:01 am

ditto Kam. u will find that these places have to set up on the rear wheels otherwise the laser machine will not work as the beam cannot be shot round the whole car with out all 4 mirrors fitted to the wheels.

It's only the front track rods that can be adjusted

My local tyre/exhaust place are great guys, when i get tracking done, out comes the 4 by 2 wood to help get chariot on the ramps. It's a job because it's up hill onto the ramp also but i manage it with my E30's on a 60mm drop.

Most tyre places are w*nkers which explains alot.
kam-325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 4851
Joined: Tue Sep 27, 2005 11:00 pm
Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!

Post Fri Dec 29, 2006 12:08 am

I have seen loads of E30 owners being stung for a "4 Wheel laser alignment".......

Kwik Fit tried to charge me for a "Rear camber adjustment", should of seen there face when i asked how they adjusted the rear camber..........
Pete don't care about colour, He would shag a rainbow if he could find the end of it....
Image
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Fri Dec 29, 2006 12:15 am

kam-325i wrote:Rear suspension geometry on a E30 is not adjustable with OEM fittings.......
Not with the bits that are likely to be on the car, but BMW can supply replacement parts to change the angles.
Simon13
The longest resto in the world !
Posts: 22697
Joined: Mon Jan 10, 2005 11:00 pm
Location: Camberley, Surrey don't u know

Post Fri Dec 29, 2006 12:21 am

i only know of eccentric trailing arm bushes Brian for camber. Are there any others? I can't see how though?!
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Fri Dec 29, 2006 12:35 am

Does anyone know for sure? Had them in their hand sure? Part No etc, ive asked before but only got replies saying 'just go in and ask for eccentric trailing arm bushes, they will know what they are'

Trust me, they wont :)
Simon13
The longest resto in the world !
Posts: 22697
Joined: Mon Jan 10, 2005 11:00 pm
Location: Camberley, Surrey don't u know

Post Fri Dec 29, 2006 12:44 am

do i need to post up pictures of ones i have then to convince you? £25 for a pair
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Fri Dec 29, 2006 12:45 am

Just a part No please Simon :wink:
Simon13
The longest resto in the world !
Posts: 22697
Joined: Mon Jan 10, 2005 11:00 pm
Location: Camberley, Surrey don't u know

Post Fri Dec 29, 2006 12:48 am

oh god the reciept i have is long gone and i don't have a copy of the etk

so a photo is not good enough!
kam-325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 4851
Joined: Tue Sep 27, 2005 11:00 pm
Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!

Post Fri Dec 29, 2006 12:48 am

SET RUBBER MOUNTING ECCENTRIC 33329058822

Part #9

http://www.realoem.com/bmw/showparts.do ... g=33&fg=30
Pete don't care about colour, He would shag a rainbow if he could find the end of it....
Image
Hyperion
E30 Zone Squatter
E30 Zone Squatter
Posts: 1727
Joined: Tue Jul 12, 2005 11:00 pm
Location: JHB, South Africa

Post Fri Dec 29, 2006 6:12 am

man oh man, have i had problems with tracking. my first bad experiance which i am still suffering from was when i took my car to get lowered, and the guys who did the job, wanted to "fix" camber on the rear and used a 10 ton air jack to bend my rear suspension. End result better camber, bad rear toe in and two bent rear control arms. managed to change my one rear control arm, just waiting now for the scrap yard to open again so i can find one for my rear left. :( Learnt my lesson thou. i found a Supa Quick (sort of a Kwik fit) close to where i stay, good chaps, they also had a problem getting my car up onto the machine but never turned me away, took their time and got my car up with out damage and tracked her :)
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Fri Dec 29, 2006 9:00 am

kam-325i wrote:SET RUBBER MOUNTING ECCENTRIC 33329058822

Part #9

http://www.realoem.com/bmw/showparts.do ... g=33&fg=30
Thanks Kam,

Why couldnt I find that :mad:
gareth
E30 Zone Team Member
E30 Zone Team Member
Posts: 11005
Joined: Tue Jan 11, 2005 11:00 pm
Location: hastings, east sussex

Post Fri Dec 29, 2006 1:47 pm

a dodgy tyre place once tried to charge me for correcting my rear toe in and camber on my mk2 rs2000. they got a bit defensive when i asked them how they did this as it's a beam axle!!!! :eek: :D

my local kwik fit can't do my tourer though i reckon the tools will fit on with some fiddling...

one thing to watch for though, make sure they loosen the rack boots off as i've had several places rip them by leaving them tight!
Sole founder of Fe2O3-12V it's a lifestyle
Image
LSD rebuilding / modification services provided, PM for details
User avatar
alan325i
E30 Zone Regular
E30 Zone Regular
Posts: 369
Joined: Mon Feb 14, 2005 11:00 pm
Location: Yardley, Birmingham

Post Fri Dec 29, 2006 4:44 pm

well i got it done and feels nice and tight now :D

The machine used cost them 25k 8O all computerized and gives you a print out of the camber, toe and other measurements before and after alignment is done.

The tools used by kwik fit etc are like prehistoric relics (including the lazer ones) compared to this machine.

Their website is http://www.silverlinewheels-tyres.com/ and they are in Warwick and for only just under £30 i'd recommend them
Image
Pal318is
E30 Zone Addict
E30 Zone Addict
Posts: 3494
Joined: Fri Jan 14, 2005 11:00 pm
Location: Kop End - Bedford

Post Fri Dec 29, 2006 5:51 pm

Right call me a idiot (i know someone will) but does this meen my local place is just trying to rip me off??

Once the car has been lowered, how do you fix the problem of inside tyre wear??

Pal
Pal

Image[img]http://Image
M42's Run in the Family...The kids sayin 'YNWA'
kam-325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 4851
Joined: Tue Sep 27, 2005 11:00 pm
Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!

Post Fri Dec 29, 2006 6:10 pm

More than likley.......There is no way to adjust the rear camber or toe without fitting new parts.

To adjust the rear camber, you need to buy the trailing arm bushes as shown above, part #9.

Therer is a way to modify the rear sub frame so that the mountings for the trailing arms have some adjustment.

The only thing your local garage can adjust, without fitting new parts, is the front toe, via the track rod ends.
Pete don't care about colour, He would shag a rainbow if he could find the end of it....
Image
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Fri Dec 29, 2006 8:22 pm

The E39 5 series has a couple of eccentric bolts in its rear suspension to adjust something or other.
Fortunately, these bolts are exactly the same size as the bolts than go through E30 trailing arm bushes, so, by slotting the holes in the subframe and welding on bits to locate the bolt heads and nuts, you can have an E30 rear beam with suspension adjustable for camber and toe.
gareth
E30 Zone Team Member
E30 Zone Team Member
Posts: 11005
Joined: Tue Jan 11, 2005 11:00 pm
Location: hastings, east sussex

Post Fri Dec 29, 2006 8:36 pm

i've seen a guide on this somewhere... an american site iirc

got to be the best way of doing it.

VW use a similar system on some cars (came across in on a MK2 scirocco) for adjusting camber between the strut and hub. useful for when you lower it.
Sole founder of Fe2O3-12V it's a lifestyle
Image
LSD rebuilding / modification services provided, PM for details