Thoughts please? 18mpg (behaving)

Need technical Q/A then you're in the right place

Moderator: martauto

SCOTT325SE
Married to the E30 Zone
Married to the E30 Zone
Posts: 12582
Joined: Sun Jan 09, 2005 11:00 pm
Location: Carmarthen (West Wales)

Post Tue Dec 26, 2006 4:13 pm

Hia guys. Doubt many members will be online, but if anyone is actually here, does anyone have any ideas whats up with my bloody car?

Shes doing about 18mpg combined. I always got 25+ out of all of my 325s ever since I started driving them.

Ive swapped the AFM over for another spare I have here at home, but it doesnt seem to have done anything to the needle.... it seems to have a lead weight in its tip and always points directly down (between 20 and 15mpg on the scare-o-meter) It does move, it does work, but why's she SO BAD on fuel?

Anyone got any ideas?

Shes running standard chip by the way
ajm-e30
E30 Zone Regular
E30 Zone Regular
Posts: 472
Joined: Sat Nov 11, 2006 11:00 pm
Location: newport,land of sheep sh***ers

Post Tue Dec 26, 2006 4:16 pm

check theres no cracks or tears in the pipe between the fuel press reg and inlet mate, or could be a heavy foot winkeye
Image
M5pilot
E30 Zone Addict
E30 Zone Addict
Posts: 4968
Joined: Sun Jan 30, 2005 11:00 pm
Location: Luton

Post Tue Dec 26, 2006 4:21 pm

Did you change the AFM with a brand new one? IF it's just another one then it's probably shagged.

Do you have a fuel pressue guage?

Can you smell fuel?
SCOTT325SE
Married to the E30 Zone
Married to the E30 Zone
Posts: 12582
Joined: Sun Jan 09, 2005 11:00 pm
Location: Carmarthen (West Wales)

Post Tue Dec 26, 2006 4:22 pm

ALL pipes in the engine bay are new and if there was a crack, there would be fuel all over my engine and car would probably be in flames. :eek: All pipes are good, no smell of fuel at all.

Heavy right foot it DEFFINATELY isnt.... ive been behaving 98% of the time since getting her running again (scared to bend it)
SCOTT325SE
Married to the E30 Zone
Married to the E30 Zone
Posts: 12582
Joined: Sun Jan 09, 2005 11:00 pm
Location: Carmarthen (West Wales)

Post Tue Dec 26, 2006 4:24 pm

M5pilot wrote:Did you change the AFM with a brand new one? IF it's just another one then it's probably shagged.

Do you have a fuel pressue guage?

Can you smell fuel?
no fuel smell at all Sal.

Dont have a F.P.G. where from and how much? Car has a new F.P.Regulator fitted.

AFM is just another one i had. £175 from GSF for a new AFM is something i cant afford right now. Would love to chat to anyone with a known perfect one though.
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Tue Dec 26, 2006 5:55 pm

What colour are the spark plugs?
SCOTT325SE
Married to the E30 Zone
Married to the E30 Zone
Posts: 12582
Joined: Sun Jan 09, 2005 11:00 pm
Location: Carmarthen (West Wales)

Post Tue Dec 26, 2006 5:59 pm

dont look black, but i moved the car yesterday, literally off and straight back on the drive and pulled the plugs and they seemed wet.... dunno wether thats water evaporation or unburnt raw fuel. thoughts?
SCOTT325SE
Married to the E30 Zone
Married to the E30 Zone
Posts: 12582
Joined: Sun Jan 09, 2005 11:00 pm
Location: Carmarthen (West Wales)

Post Tue Dec 26, 2006 9:31 pm

got a pic here for ya guys. lol. this is amusing......

check the cleanliness of the 1 spark plug. its not even cooked the ceramic. these have been in identical lengths of time.

Image

Image
SCOTT325SE
Married to the E30 Zone
Married to the E30 Zone
Posts: 12582
Joined: Sun Jan 09, 2005 11:00 pm
Location: Carmarthen (West Wales)

Post Tue Dec 26, 2006 9:32 pm

woud people be of the opinion that its simply not burning in this chamber? lol.
Simon
E30 Zone Team Member
E30 Zone Team Member
Posts: 14939
Joined: Sun Jan 09, 2005 11:00 pm
Location: South Wales

Post Tue Dec 26, 2006 9:36 pm

Your not loosing any coolant are you!?
Image
SCOTT325SE
Married to the E30 Zone
Married to the E30 Zone
Posts: 12582
Joined: Sun Jan 09, 2005 11:00 pm
Location: Carmarthen (West Wales)

Post Tue Dec 26, 2006 9:38 pm

pmsl. only where there is a crack in the top cap o-ring for the header tank
SCOTT325SE
Married to the E30 Zone
Married to the E30 Zone
Posts: 12582
Joined: Sun Jan 09, 2005 11:00 pm
Location: Carmarthen (West Wales)

Post Tue Dec 26, 2006 9:41 pm

simon, do u need a head for your touring? if so, ive got something u may like to see. i bring it with me 2moro. if ur not in, it'll wait for another day.
Simon
E30 Zone Team Member
E30 Zone Team Member
Posts: 14939
Joined: Sun Jan 09, 2005 11:00 pm
Location: South Wales

Post Tue Dec 26, 2006 9:43 pm

SCOTT325SE wrote:simon, do u need a head for your touring? if so, ive got something u may like to see. i bring it with me 2moro. if ur not in, it'll wait for another day.
Cheers for the offer Scott, I'm going to swop the engine for another for now, seems an easier task to swop engines than swop heads! And it would probably cost more!
Image
SCOTT325SE
Married to the E30 Zone
Married to the E30 Zone
Posts: 12582
Joined: Sun Jan 09, 2005 11:00 pm
Location: Carmarthen (West Wales)

Post Tue Dec 26, 2006 9:44 pm

Simon wrote:
SCOTT325SE wrote:simon, do u need a head for your touring? if so, ive got something u may like to see. i bring it with me 2moro. if ur not in, it'll wait for another day.
Cheers for the offer Scott, I'm going to swop the engine for another for now, seems an easier task to swop engines than swop heads! And it would probably cost more!
knowing your source for the car, ur probably right in saying its cheaper. lol. im getting paranoid about this bloody car now!
SCOTT325SE
Married to the E30 Zone
Married to the E30 Zone
Posts: 12582
Joined: Sun Jan 09, 2005 11:00 pm
Location: Carmarthen (West Wales)

Post Tue Dec 26, 2006 9:57 pm

actually, looking at the header top cap, i dont think its affecting the pressure capacity, as when its down tight, it seals cleanly.




simon......... i think the wetness is water. u know what this means, dont you?
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Tue Dec 26, 2006 9:58 pm

I suppose a plug that wasn't firing would stay shiny and bright, but it's usually a sign of it being steam cleaned by water leaking into that cylinder.
Time for a compression check I think.
SCOTT325SE
Married to the E30 Zone
Married to the E30 Zone
Posts: 12582
Joined: Sun Jan 09, 2005 11:00 pm
Location: Carmarthen (West Wales)

Post Tue Dec 26, 2006 10:12 pm

Brianmoooore wrote:I suppose a plug that wasn't firing would stay shiny and bright, but it's usually a sign of it being steam cleaned by water leaking into that cylinder.
Time for a compression check I think.
got a compression tester, but no willing assistant - im home alone. bollards! defo hasnt been steam cleaned. i just went out with a clean plug, screwwed it in, spun it over to fire, ran for 5 seconds, switched off. removed plug. plug has a residue on it, but not water. thicker than that.

ideas?










moral of this story is never use a donor engine by the way! Always rebuild with known good parts, prefferably brand new, from some thieving stealer.... which is what I think I will be doing in the coming weeks by the looks of things.
E30Adam
Married to the E30 Zone
Married to the E30 Zone
Posts: 8483
Joined: Sun Dec 19, 2004 11:00 pm
Location: Bournemouth

Post Tue Dec 26, 2006 10:18 pm

Dude, I feel for you. Sounds like the sort of luck I have. Fingers crossed for you fella.
Image

2.8 Litre M20 powered - Essen Sie meinen Staub biatch
Speedtouch
Old Skooler
Old Skooler
Posts: 14129
Joined: Tue Feb 14, 2006 11:00 pm
Location: Canterbury

Post Tue Dec 26, 2006 10:20 pm

Duff no.1 spark plug lead perhaps?
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
SCOTT325SE
Married to the E30 Zone
Married to the E30 Zone
Posts: 12582
Joined: Sun Jan 09, 2005 11:00 pm
Location: Carmarthen (West Wales)

Post Tue Dec 26, 2006 10:20 pm

Thanks Adam. Does it look that way to you aswell then?
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Tue Dec 26, 2006 10:20 pm

Take one of the small leads off the coil and spin it over for a few seconds. Take out the suspect plug and another one and see if they are both wet with fuel.
E30Adam
Married to the E30 Zone
Married to the E30 Zone
Posts: 8483
Joined: Sun Dec 19, 2004 11:00 pm
Location: Bournemouth

Post Tue Dec 26, 2006 10:22 pm

SCOTT325SE wrote:Thanks Adam. Does it look that way to you aswell then?
It appears that way but make sure you do all the relevant tests first to rule out any other potential problems.
Image

2.8 Litre M20 powered - Essen Sie meinen Staub biatch
SCOTT325SE
Married to the E30 Zone
Married to the E30 Zone
Posts: 12582
Joined: Sun Jan 09, 2005 11:00 pm
Location: Carmarthen (West Wales)

Post Tue Dec 26, 2006 10:36 pm

spun her over for a few seconds. using cylnder 1 (burning well) and cylinder 4 (no burning) plugs

cyl 1 smells heavy on fuel. plug was actually dry when i got it out, but does smell of juice!
cyl 4 ....well... i cant tell. that sounds bloody stupid, but there is a residue on the plug, but its lightly tinted rather than being almost clear like fuel would be. its the same residue that was there with the original cyl 4 spark plug
SCOTT325SE
Married to the E30 Zone
Married to the E30 Zone
Posts: 12582
Joined: Sun Jan 09, 2005 11:00 pm
Location: Carmarthen (West Wales)

Post Tue Dec 26, 2006 10:38 pm

does any1 steal cars for a living? if you do, step forward will ya coz if the problems with this escallate, i may as well ahve the bugger nicked
User avatar
Pissed-Off-Puppy
E30 Zone Newbie
E30 Zone Newbie
Posts: 1
Joined: Mon Dec 25, 2006 11:00 pm

Post Tue Dec 26, 2006 10:45 pm

Thought I'd register an appropriate screen name for the odd occasion when things dont look too good. LOL.
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Tue Dec 26, 2006 11:05 pm

Now you've got both plugs out, pull out the fuel pump relay or fuse 11, put the leads back on both plugs and lay them on the rocker cover. Reconnect the ignition coil and crank the engine over.
Do both plugs spark away happily?