gearnob and gaitor
Moderator: martauto
-
y8sey
- E30 Zone Regular

- Posts: 273
- Joined: Fri Oct 07, 2005 11:00 pm
- Location: gloucestershire
just bought new gearknob and gaitor, when fitted it wont stay there.there is a small self tapping screw in the top but it doesnt seem to do anything. anyone know what i am doing wrong? if i can get it to fit i will have a slightly worn one for sale.
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
What you are doing wrong is trying to fit aftermarket crap to a BMW!
-
y8sey
- E30 Zone Regular

- Posts: 273
- Joined: Fri Oct 07, 2005 11:00 pm
- Location: gloucestershire
why jump in with that sort of answer when you dont know? i bought it from BMW in gloucester. thanks for your help i found it very useful !!!!
-
smithy318i
- Engaged to the E30 Zone

- Posts: 5797
- Joined: Thu Apr 28, 2005 11:00 pm
- Location: Tyne & Wear
If it's an original BMW part it should just push onto the gear lever. There shouldnt be ant screws in it (other than the one under the plastic cover)

-
y8sey
- E30 Zone Regular

- Posts: 273
- Joined: Fri Oct 07, 2005 11:00 pm
- Location: gloucestershire
it is genuine. when i push it on it comes off when i drive it. the screw is the one under the plastic cover.
-
smithy318i
- Engaged to the E30 Zone

- Posts: 5797
- Joined: Thu Apr 28, 2005 11:00 pm
- Location: Tyne & Wear
you should push it down onto the shaft of the lever until it clips into place.
if it doesn't clip into the notch on the lever you should take it back and say it doesnt fit.
if it doesn't clip into the notch on the lever you should take it back and say it doesnt fit.

