offset

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

iil325i
E30 Zone Regular
E30 Zone Regular
Posts: 589
Joined: Fri May 06, 2005 11:00 pm
Location: cambs

Post Sun Dec 24, 2006 12:28 pm

what offset do i need on my sport if im going for 17", i thought it was 20 but im being told something like 15, i dont want them to stick in or stick out and rub,

the guy in the shop said that only e30 m3 have a 20 offset

help :cry:

lol
ImageImage
Gouki
E30 Zone Addict
E30 Zone Addict
Posts: 2262
Joined: Mon Jun 13, 2005 11:00 pm

Post Sun Dec 24, 2006 12:30 pm

If you want them to line up nicely with the panels between 15-25mm should be fine.
Image
iil325i
E30 Zone Regular
E30 Zone Regular
Posts: 589
Joined: Fri May 06, 2005 11:00 pm
Location: cambs

Post Sun Dec 24, 2006 12:31 pm

cool thanks

is that with out rubbing on a 60mm drop
ImageImage
Gouki
E30 Zone Addict
E30 Zone Addict
Posts: 2262
Joined: Mon Jun 13, 2005 11:00 pm

Post Sun Dec 24, 2006 12:34 pm

depends how wide the wheels and tyres are?
Image
iil325i
E30 Zone Regular
E30 Zone Regular
Posts: 589
Joined: Fri May 06, 2005 11:00 pm
Location: cambs

Post Sun Dec 24, 2006 12:34 pm

i think im going to go 215 rear 205 front
i think there 7j
ImageImage
Gouki
E30 Zone Addict
E30 Zone Addict
Posts: 2262
Joined: Mon Jun 13, 2005 11:00 pm

Post Sun Dec 24, 2006 12:40 pm

not sure, i had a 60mm drop on my cab when i first bought it, 215 tyres on the rear but had no rubbing issues however my offset was higher at 35mm. So that may have cleared the arch but it sat further in so didnt look great!
Image
iil325i
E30 Zone Regular
E30 Zone Regular
Posts: 589
Joined: Fri May 06, 2005 11:00 pm
Location: cambs

Post Sun Dec 24, 2006 12:43 pm

thanks mate guess i just need to try and see lol
ImageImage
Gouki
E30 Zone Addict
E30 Zone Addict
Posts: 2262
Joined: Mon Jun 13, 2005 11:00 pm

Post Sun Dec 24, 2006 1:05 pm

what sorta wheels you getting on yours?
Image
iil325i
E30 Zone Regular
E30 Zone Regular
Posts: 589
Joined: Fri May 06, 2005 11:00 pm
Location: cambs

Post Sun Dec 24, 2006 4:22 pm

these bad boys, thats if they do them in the right offset

Image
ImageImage
User avatar
orangecurry
E30 Zone Addict
E30 Zone Addict
Posts: 2518
Joined: Mon Apr 11, 2005 11:00 pm
Location: West Sussex

Post Sun Dec 24, 2006 9:38 pm

Gouki wrote:depends how wide the wheels and tyres are?
depends ONLY on the width of the rim - the width of the tyre should suit the rim, otherwise you might have some problems, but if you go too wide and the offset is too far off stock, or you have lowered too much, you will get rubbing.

Diameter of the wheel is unconnected.

The BMW BBS 15" wheels are 7J and are offset 24. Therefore any 7J aftermarket wheels you choose should be close to this. 10 either way 'probably' won't cause a problem unless you choose wide tyres, say anything over 215s.

But ask other zoners what they have actually tried. I have 205s on 7.5Js with an offset of 25, and they are fine. I think original Alpinas came with 225s?
mac325i
E30 Zone Newbie
E30 Zone Newbie
Posts: 116
Joined: Thu Jul 28, 2005 11:00 pm
Location: sheffield, s.yorks

Post Mon Dec 25, 2006 5:54 am

The rears aren't be a problem - I ran 205's on a 7.5jx16 rim with a 40mm offset on the rear with no issues, while refurbing my Borbets(50mm drop)

Its the fronts that cause fouling, I currently have 205x50 on a 7.5x16 with ET25, no rubbing or lock issues

If you run 205x40x17, ET25 should be fine

Quote -
I think original Alpinas came with 225s?

I'm pretty sure 225's were on the rear (8jx16 rim)

hope this helps
User avatar
cuk325
E30 Zone Addict
E30 Zone Addict
Posts: 4818
Joined: Sun Jan 09, 2005 11:00 pm
Location: west mids

Post Tue Dec 26, 2006 6:20 pm

i had 18s on my tech 1 sport, 60mm drop, 215 35 18 tyres and a 20 offset, no problems at all.
Image
SCOTT325SE
Married to the E30 Zone
Married to the E30 Zone
Posts: 12582
Joined: Sun Jan 09, 2005 11:00 pm
Location: Carmarthen (West Wales)

Post Tue Dec 26, 2006 6:30 pm

well ive got standard bbs 15s with 225 tyres on the back and they dont rub at all, which just goes to show that if you have the correct offset, you should be fine