Power run results!

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

he30
E30 Zone Regular
E30 Zone Regular
Posts: 978
Joined: Tue Oct 31, 2006 11:00 pm
Location: west yorkshire

Post Sat Dec 23, 2006 1:56 pm

Got the power run results in from my stock 325is, and shes bang on the money much to my suprise.

Max 170 BHP at 5858 RPM

Max 154 lbft at 5858 RPM

Both results at the rear wheels. :clap:

All in all shes in good shape by the looks of things.Just left with the debate wheather to mod or not,i can't make up my mind. After reading this forum, BBTB & chip seems to be the way to go, both of which are reversable which i like the idea of.
pete69zx
E30 Zone Regular
E30 Zone Regular
Posts: 317
Joined: Thu Apr 14, 2005 11:00 pm
Location: Teeside

Post Sat Dec 23, 2006 2:04 pm

Mod it, you know you want to ;-)
Image
fuzzy
He who sleeps with "Gingers"
Posts: 14351
Joined: Sat Jun 04, 2005 11:00 pm
Location: melbourne Australia

Post Sat Dec 23, 2006 2:14 pm

surely that cant be at the wheels? you generally lose about 15% power through the transmission so that would mean your engine was putting out about 195 bhp :?
fuzzy
He who sleeps with "Gingers"
Posts: 14351
Joined: Sat Jun 04, 2005 11:00 pm
Location: melbourne Australia

Post Sat Dec 23, 2006 2:17 pm

but regarding the modding debate,there is no debate,obviously it has to be modded winkeye
jimerilo
E30 Zone Regular
E30 Zone Regular
Posts: 285
Joined: Mon Oct 09, 2006 11:00 pm
Location: Yorkshire

Post Sat Dec 23, 2006 2:23 pm

Where did you go for your power run?
Engine seems healthy to say its standard apart from exhaust :)

James.
Jon_Bmw
Dangerous when thinking
Dangerous when thinking
Posts: 7604
Joined: Tue Jan 11, 2005 11:00 pm
Location: Salisbury

Post Sat Dec 23, 2006 2:27 pm

More crank figures :wink:

You have got a healthy engine there, especially considering it is a late lump(tech2 sport?)

Top results, ideal candidate for a 6 branch i think.
e30_Turbo
Boost Junkie
Posts: 3158
Joined: Mon Jan 10, 2005 11:00 pm
Location: East Anglia

Post Sat Dec 23, 2006 2:27 pm

The stock quoted figure is 171bhp @ the crank, so 140odd atrw, still most don't make 160/165 these days, so yours is a healthy one.

A 210bhp 2.7 with cams would make close to 170bhp atrw.

We had this same thing with Blingsta the other day, if he had the rwhp measure then he was well happy but his printout said at the crank, which is the harder of the two values to work out so no idea why they use it.

BBTB & Chip will see good gains everywhere, I have an uprated chip for a 380/173 ecu that I have left over from my project if you're looking to buy one? BBTB's can be bought from the zone shop.

HTH, Mark.
Image
fuzzy
He who sleeps with "Gingers"
Posts: 14351
Joined: Sat Jun 04, 2005 11:00 pm
Location: melbourne Australia

Post Sat Dec 23, 2006 2:36 pm

how does it end up giving you a flywheel power figure when the wheels are driving the rollers on the floor? does the r/r work out the transmission losses? :?
Jon_Bmw
Dangerous when thinking
Dangerous when thinking
Posts: 7604
Joined: Tue Jan 11, 2005 11:00 pm
Location: Salisbury

Post Sat Dec 23, 2006 2:39 pm

fuzzy wrote:how does it end up giving you a flywheel power figure when the wheels are driving the rollers on the floor? does the r/r work out the transmission losses? :?
Yes and badly(uncomparable with other rolling roads usually)

As mark said RWHP is where its at, something the americans do right, for a change :o
User avatar
pnd
E30 Zone Squatter
E30 Zone Squatter
Posts: 1801
Joined: Sat Nov 12, 2005 11:00 pm

Post Sat Dec 23, 2006 4:04 pm

torque is down though, if your going to mod do the bolt ons bbtb 6 branch chip and decent panel filter a cam will lose you more torque and its ahead off job. surely peak torque should be around 4000 rpm not up at nearly 6 can anyone explain.
User avatar
parksie
E30 Zone Regular
E30 Zone Regular
Posts: 421
Joined: Sat Feb 19, 2005 11:00 pm

Post Sat Dec 23, 2006 5:19 pm

pnd wrote:torque is down though, if your going to mod do the bolt ons bbtb 6 branch chip and decent panel filter a cam will lose you more torque and its ahead off job. surely peak torque should be around 4000 rpm not up at nearly 6 can anyone explain.
I totally agree peak torque is always going to be in the 3-4000 rev band.


Maybe he should scan the test report so the PROOF is there for all to see 8O
Turbo-Brown
Boost Junkie
Posts: 4705
Joined: Tue Feb 15, 2005 11:00 pm
Location: Aldershot, Hants

Post Sat Dec 23, 2006 5:48 pm

Those figures don't quite add up for some reason either!

The torque and power being quoted at the same engine speed makes it easy to see, not far out, but out none the less!

P=(TxN)/5252 (assuming the units are rpm, lbft and bhp (hp))

so P=(154x5858)/5252=171.8bhp

However if the figures are read from a graph then a little error is to be expected.

People do need to be careful when quoting whether their power is at the wheel or at the crank as the two figures will be quite some way apart!
325i Twin Turbo (until 10am 01/12/07 :( )

www.air-in.co.uk free M20 exhaust and inlet flange
oakey
E30 Zone Addict
E30 Zone Addict
Posts: 4891
Joined: Fri Feb 10, 2006 11:00 pm
Location: Surrey

Post Sat Dec 23, 2006 6:29 pm

This is from when my car was tested ages ago when it was completely standard and a bit outa shape as it says on the printout. whats that all about then? Surely that works out to about 190 at the crank? dont that seem like much to much if when it was brand new it was only running 171 at the crank?
Image
Turbo-Brown
Boost Junkie
Posts: 4705
Joined: Tue Feb 15, 2005 11:00 pm
Location: Aldershot, Hants

Post Sat Dec 23, 2006 7:41 pm

But where's it supposed to have magically gained 19 horsepower from?

Just seems odd that all the figures cropping up and being stated as 'at the wheel' correspond to what the engine on test should be putting out at the crank.

Where are these power runs being done and how reputable / experienced are the RR operators?
325i Twin Turbo (until 10am 01/12/07 :( )

www.air-in.co.uk free M20 exhaust and inlet flange
dimebag_from_hell
E30 Zone Camper
E30 Zone Camper
Posts: 1494
Joined: Sun Aug 27, 2006 11:00 pm
Location: NORTHERN IRELAND

Post Sat Dec 23, 2006 7:53 pm

i'd leave it mate! screw modding the sport, keep er original!
Image

"Service to others is the rent you pay for your room here on earth."
csl
E30 Zone Addict
E30 Zone Addict
Posts: 2116
Joined: Mon May 30, 2005 11:00 pm
Location: Lancaster

Post Sat Dec 23, 2006 8:11 pm

I'm with dimebag on this !
User avatar
reggid
E30 Zone Squatter
E30 Zone Squatter
Posts: 1984
Joined: Mon Jul 11, 2005 11:00 pm
Location: Oz

Post Sat Dec 23, 2006 10:08 pm

bhp is always at the flywheel so this bhp at the wheels is rubbish and says alot about the results. A stock car won't nearly make 170rwhp, 140-150 would be good rwhp numbers

Jon_Bmw is correct the rolling road figures are not comparable with any other system
Turbo-Brown
Boost Junkie
Posts: 4705
Joined: Tue Feb 15, 2005 11:00 pm
Location: Aldershot, Hants

Post Sat Dec 23, 2006 11:44 pm

No, bhp is Horse Power measured against a Brake.

You can apply a brake to any part of the drive train to obtain a Brake Horse Power figure, be it the wheels, flywheel, driven hubs....whatever.

It would also apply if you were turning a little handle and we were measuring the power.
325i Twin Turbo (until 10am 01/12/07 :( )

www.air-in.co.uk free M20 exhaust and inlet flange
User avatar
reggid
E30 Zone Squatter
E30 Zone Squatter
Posts: 1984
Joined: Mon Jul 11, 2005 11:00 pm
Location: Oz

Post Sun Dec 24, 2006 2:04 am

Turbo-Brown wrote:No, bhp is Horse Power measured against a Brake.

You can apply a brake to any part of the drive train to obtain a Brake Horse Power figure, be it the wheels, flywheel, driven hubs....whatever.

It would also apply if you were turning a little handle and we were measuring the power.
Some definitions.

http://en.wikipedia.org/wiki/Horsepower

http://autorepair.about.com/library/glo ... ef-406.htm

Brake horsepower (bhp) is the measure of an engine's horsepower without the loss in power caused by the gearbox, generator, differential, water pump and other auxiliaries. Thus the prefix "brake" refers to where the power is measured: at the engine's output shaft, as on an engine dynamometer

http://horsepowersports.com/horsepower.php

You will also hear the term "brake horsepower" (bhp) which is the power measured at the crankshaft

http://www.answers.com/topic/horsepower

Brake horsepower (bhp) is the measure of an engine's horsepower without the loss in power caused by the gearbox, generator, differential, water pump and other auxiliaries. Thus the prefix "brake" refers to where the power is measured: at the engine's output shaft, as on an engine dynamometer. The actual horsepower delivered to the driving wheels is less. An engine would have to be retested to obtain a rating in another system. The term "brake" refers to the use of a band brake to measure torque during the test (which is multiplied by the engine speed in revs/sec and the circumference of the band to give the power).
http://www.indiacar.com/infobank/torque_bhp2.htm

Brake HP (BHP)
It is the Power that an Engine can deliver for â€Ëauseful' work, i.e. at its Flywheel and is measured on â€ËaTest-Beds' using â€ËaPony Brakes' or â€ËaDynamometers'.


The fact is that BHP is not so general as to apply to a brake applied anywhere in the system. it is for an engine only not a engine and driveline.
Turbo-Brown
Boost Junkie
Posts: 4705
Joined: Tue Feb 15, 2005 11:00 pm
Location: Aldershot, Hants

Post Sun Dec 24, 2006 10:09 am

Fair enough, will have to pull my head in and admit I'm wrong there then :)

Does pose the question though, if you're measuring power at the wheels against a brake, why would you not call it Brake Horse Power?

Not quite sure how you're supposed to eliminate things like water pumps from the equation either, what about oil pumps too?
325i Twin Turbo (until 10am 01/12/07 :( )

www.air-in.co.uk free M20 exhaust and inlet flange
he30
E30 Zone Regular
E30 Zone Regular
Posts: 978
Joined: Tue Oct 31, 2006 11:00 pm
Location: west yorkshire

Post Sun Dec 24, 2006 2:23 pm

Well, this seems to have caused some debate, and to be honest one i can'tanswer just yet. Power run was at well lane turbo center at batley which has a good rep. As for the results i don't have enough knowledge to say, but was told it was producing what it should? i'll try to borrow a scanner to get a copy of the results up, and to be fair it dosen't refer to wheels or flywheel.The results are in graph format though and does show max ftlb at 5800 rpm on a 45 degree curve? I'll get in touch after crimbo to see if i can get a full explanation?

Cheers H.

P.s. happy with results though :D
he30
E30 Zone Regular
E30 Zone Regular
Posts: 978
Joined: Tue Oct 31, 2006 11:00 pm
Location: west yorkshire

Post Sun Dec 24, 2006 2:24 pm

fozzymonster wrote:The stock quoted figure is 171bhp @ the crank, so 140odd atrw, still most don't make 160/165 these days, so yours is a healthy one.

A 210bhp 2.7 with cams would make close to 170bhp atrw.

We had this same thing with Blingsta the other day, if he had the rwhp measure then he was well happy but his printout said at the crank, which is the harder of the two values to work out so no idea why they use it.

BBTB & Chip will see good gains everywhere, I have an uprated chip for a 380/173 ecu that I have left over from my project if you're looking to buy one? BBTB's can be bought from the zone shop.

HTH, Mark.
How much for the chip fella?
Simon13
The longest resto in the world !
Posts: 22697
Joined: Mon Jan 10, 2005 11:00 pm
Location: Camberley, Surrey don't u know

Post Sun Dec 24, 2006 4:29 pm

hang on! sorry to piss on your fire mate but that car is over 10lbs down on torque!

164lbs is stock and 171bhp
maxfield
Old Skooler
Old Skooler
Posts: 15185
Joined: Sat Nov 26, 2005 11:00 pm
Location: Mansfield

Post Sun Dec 24, 2006 4:36 pm

Simon13 wrote:hang on! sorry to **** on your fire mate but that car is over 10lbs down on torque!

164lbs is stock and 171bhp
still good results after 16 years or so

seems decent enough results to me

the drivetrain percentage loss seems to have been concluded about 15-18%

so 170*85/100 = 144.5 so that would be your wheel hp give a few bhp +/-

or if you was putting 170 at the wheels you would need to have about 200 or so
Image
Simon13
The longest resto in the world !
Posts: 22697
Joined: Mon Jan 10, 2005 11:00 pm
Location: Camberley, Surrey don't u know

Post Sun Dec 24, 2006 6:04 pm

yes but u will notice that out on the road.

my old sport did

163bhp and 175lbs on the rollers, it was chipped and overfuelling on the topend. the guy who dynoed it said it would of probably made the 170 if the fueling was correct on the top end. So i put the standard chip back in and it felt better and didn't smell rich after i had been giving it a load of sh!t

Was quite a grunty 2.5 as the torque figure suggested
Andyboy
Alpina Colada
Posts: 12577
Joined: Mon Sep 11, 2006 11:00 pm
Location: Notts

Post Sun Dec 24, 2006 6:14 pm

That's F*ck all Losers. My 318iS with it's big bore Peco back box does a genuine 204 decibels at the rear wheels.
Simon - happy Xmas you gay brickie!! :D

Here's my dyno graph from when I had the E30 zone keyring on me '25i
Image
Simon13
The longest resto in the world !
Posts: 22697
Joined: Mon Jan 10, 2005 11:00 pm
Location: Camberley, Surrey don't u know

Post Sun Dec 24, 2006 6:36 pm

:D merry Crimbo
maxfield
Old Skooler
Old Skooler
Posts: 15185
Joined: Sat Nov 26, 2005 11:00 pm
Location: Mansfield

Post Sun Dec 24, 2006 6:38 pm

was this done by bexleys as its got the usual 2k dip :D
Image
Andyboy
Alpina Colada
Posts: 12577
Joined: Mon Sep 11, 2006 11:00 pm
Location: Notts

Post Sun Dec 24, 2006 6:40 pm

Oooh Max you're bad.

BTW Are you going to try and stay awake to night to take a delivery from a bearded man with bulging sacks? :D And What's Santa bringing u??
maxfield
Old Skooler
Old Skooler
Posts: 15185
Joined: Sat Nov 26, 2005 11:00 pm
Location: Mansfield

Post Sun Dec 24, 2006 6:44 pm

Andyboy wrote: BTW Are you going to try and stay awake to night to take a delivery from a bearded man with bulging sacks? :D And What's Santa bringing u??
Nope i'll be sleeping like a baby all night. :D

have a look in the pub talk at my thread.

Christmas is crap when you get older
Image
iil325i
E30 Zone Regular
E30 Zone Regular
Posts: 589
Joined: Fri May 06, 2005 11:00 pm
Location: cambs

Post Sun Dec 24, 2006 6:58 pm

thats coming from the 15year old :mad:

it not that bad when you find beer and your knob winkeye
ImageImage
maxfield
Old Skooler
Old Skooler
Posts: 15185
Joined: Sat Nov 26, 2005 11:00 pm
Location: Mansfield

Post Sun Dec 24, 2006 6:59 pm

iil325i wrote:thats coming from the 15year old :mad:

it not that bad when you find beer and your knob winkeye
16 year old

found both thanks :D
Image
iil325i
E30 Zone Regular
E30 Zone Regular
Posts: 589
Joined: Fri May 06, 2005 11:00 pm
Location: cambs

Post Sun Dec 24, 2006 7:00 pm

ok then when you know how to use them both winkeye
ImageImage
User avatar
parksie
E30 Zone Regular
E30 Zone Regular
Posts: 421
Joined: Sat Feb 19, 2005 11:00 pm

Post Sun Dec 24, 2006 7:38 pm

OK Guys ,Thats just so funny, never laughed so much since my old grannie died :D :) :eek: Merry Xmas y'all
jonb
E30 Zone Addict
E30 Zone Addict
Posts: 3732
Joined: Sun Jan 09, 2005 11:00 pm
Location: bristol

Post Sun Dec 24, 2006 9:32 pm

Andyboy wrote:That's F*ck all Losers. My 318iS with it's big bore Peco back box does a genuine 204 decibels at the rear wheels.
Simon - happy Xmas you gay brickie!! :D

Here's my dyno graph from when I had the E30 zone keyring on me '25i
Image
andy

what dyno did you use???

last time i got that power from a 318is it was from my arse and 8 pints of stella dyno.