Convertible battery placement

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

User avatar
vmckague
E30 Zone Newbie
E30 Zone Newbie
Posts: 1
Joined: Thu Dec 01, 2005 11:00 pm

Post Fri Dec 22, 2006 2:58 am

I have asked this question on quite a few groups over the last few years and no on seems to know the answer for sure. Why is the battery on the convertible E30 under the hood( bonnet) and not in the trunk(boot) like on the sedans? I do know there is a lead weight in the trunk to replace the weight of the battery so why not just leave the battery there?
mrLEE30
E30 Zone Team Member
E30 Zone Team Member
Posts: 6589
Joined: Tue Jan 18, 2005 11:00 pm
Location: Sweating buckets in Bahrain

Post Fri Dec 22, 2006 4:25 am

no idea really, hs been discussed here too, removing this lead weight does not seem to make any real difference, but on mine removing it seems to make the brake pedal vibrate a bit more if i rest my left foot on it during normal driving, the lead weight is a vibration damper. i can only assume the battery is not in the back on a cab as the sills are different as is the additional bracing under rear seat/behind rear seat so perhaps there were cable routing issues. anyway i prefer it in the front, easier to jump start whe its flat as no need to remove my subwoofer.
Image
Rosc0PColtrane
Married to the E30 Zone
Married to the E30 Zone
Posts: 9757
Joined: Tue Mar 01, 2005 11:00 pm
Location: With Ceiling cat, watching you masturbate.

Post Fri Dec 22, 2006 10:37 am

As Mr Lee said, the weight distribution is probably the reason. The lead weight alters the resonant frequency of the car and prevents vibration
Demlotcrew
E30 Zone Team Member
E30 Zone Team Member
Posts: 13329
Joined: Mon Dec 20, 2004 11:00 pm
Location: East Anglia

Post Fri Dec 22, 2006 10:48 am

M3 cabs have the battery in the boot.

Andrew
User avatar
orangecurry
E30 Zone Addict
E30 Zone Addict
Posts: 2518
Joined: Mon Apr 11, 2005 11:00 pm
Location: West Sussex

Post Fri Dec 22, 2006 10:51 am

The lead weight is not 'just' that - if you take it out and look, the fixing bolts go into rubber feet specially inserted into holes in the weight, which isolate metal-to-metal contact, or weight-to-chassis contact. The whole thing is like a crude LP turntable deck/feet, the idea of which is to stop feedback from the speakers reaching the stylus on the record...

you are expecting me to tell you why now aincha? I can only guess the same as the boys above; perhaps when BMW made the cabbie shell, they had a resonant frequency they couldn't shift, and some bright spark came up with this which solved the problem.
Rosc0PColtrane
Married to the E30 Zone
Married to the E30 Zone
Posts: 9757
Joined: Tue Mar 01, 2005 11:00 pm
Location: With Ceiling cat, watching you masturbate.

Post Fri Dec 22, 2006 1:07 pm

Cheers Orange!! I was close tho!!!
Globulator
E30 Zone Regular
E30 Zone Regular
Posts: 389
Joined: Fri Sep 23, 2005 11:00 pm

Post Fri Dec 22, 2006 3:25 pm

orangecurry wrote:The lead weight is not 'just' that - if you take it out and look, the fixing bolts go into rubber feet specially inserted into holes in the weight, which isolate metal-to-metal contact, or weight-to-chassis contact. The whole thing is like a crude LP turntable deck/feet, the idea of which is to stop feedback from the speakers reaching the stylus on the record...

you are expecting me to tell you why now aincha? I can only guess the same as the boys above; perhaps when BMW made the cabbie shell, they had a resonant frequency they couldn't shift, and some bright spark came up with this which solved the problem.
It's pig-iron too, and quite heavy, definitely reduces scuttle shake when in place - I've tested this!!

No idea why they didn't leave the battery there tho.. unless for space?!
1986 325i 'vert, funk louder than standard.
"No Mr Bond, I expect you to tell me why your 4 litre, 282bhp sports car can't outrun some lardy old Mercs.."
Audio & electronic software: http://www.cutestudio.net
User avatar
orangecurry
E30 Zone Addict
E30 Zone Addict
Posts: 2518
Joined: Mon Apr 11, 2005 11:00 pm
Location: West Sussex

Post Fri Dec 22, 2006 9:42 pm

blatantarrogance wrote:Cheers Orange!! I was close tho!!!
eh? You were spot-on :D If we are right of course :o:

What we need to do is to write to BMW (Germany) and ask them... I'll get onto it :D (The power of the interweb!)
Ziggy
E30 Zone Team Member
E30 Zone Team Member
Posts: 11534
Joined: Mon Jan 10, 2005 11:00 pm
Location: floating round my tin can...

Post Sat Dec 23, 2006 12:59 am

I've definately read the same thing elsewhere... from a relatively official source too, IIRC :)
E30 in need of wiring loom smoke since April '11...
mrLEE30
E30 Zone Team Member
E30 Zone Team Member
Posts: 6589
Joined: Tue Jan 18, 2005 11:00 pm
Location: Sweating buckets in Bahrain

Post Sat Dec 23, 2006 4:29 am

the idea of which is to stop feedback from the speakers reaching the stylus on the record...


Eh????? you have a record player in your cab?? Technics 1210s?? and if you remove this weight does the needle jump??
Image
User avatar
orangecurry
E30 Zone Addict
E30 Zone Addict
Posts: 2518
Joined: Mon Apr 11, 2005 11:00 pm
Location: West Sussex

Post Sat Dec 23, 2006 4:43 pm

Thorens TD160

the 'needle' doesn't jump; not with my wine-glass-on-the-bonnet driving, but you get low frequencies interfering with some of the clarinet solos