Diff fitting

Need technical Q/A then you're in the right place

Moderator: martauto

johnl320
E30 Zone Addict
E30 Zone Addict
Posts: 3124
Joined: Mon Jan 10, 2005 11:00 pm
Location: Hampshire

Post Wed Dec 20, 2006 1:22 pm

I've swapped quite a few diffs in my time but for some reason the 525e diff I'm putting on my project doesn't seem to want to line up with all four mounting holes on the rear beam. Its only a case of lengthening the two rear holes by about 2mm but has anyone had this before.

cheers in advance

john
jmc330i
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6621
Joined: Mon Jan 10, 2005 11:00 pm
Location: Somerset

Post Wed Dec 20, 2006 1:49 pm

Ive had this on both my E30s.

Just trial and error Im afraid. I got the first 2 lined up and the bolts in about half way, then moved the diff around so the other holes were lined up side to side, Then jacked the diff up which moves (twists) the rear beam up and the holes should come into line from front to back if that makes sense.

Not sure if thats the correct way to do it, but its worked for me 3 or 4 times now.
James
'91 325i Sport
'93 318i touring 16v
SPADGE
Married to the E30 Zone
Married to the E30 Zone
Posts: 7373
Joined: Wed Aug 09, 2006 11:00 pm
Location: Milton Keynes, Bucks

Post Wed Dec 20, 2006 2:14 pm

As James has said they can be a pain.
Don't tighten any of the bolts until they are all located properly as that makes it almost imposible.
Engine conversions, Auto to manual conversions, parts, servicing etc etc... For anything e30 call 07718 901737
320Touring
E30 Zone Team Member
E30 Zone Team Member
Posts: 12316
Joined: Fri Feb 11, 2005 11:00 pm
Location: Glasgow (Scotland)

Post Wed Dec 20, 2006 2:19 pm

I thought the e28 diff wasnt a straight swap with the e30 one? IE the coverplate and possibly case are different?
The big Unit Parts Clear out Make me an offer on parts!
http://www.e30zone.net/modules.php?name ... 81#2766881
SPADGE
Married to the E30 Zone
Married to the E30 Zone
Posts: 7373
Joined: Wed Aug 09, 2006 11:00 pm
Location: Milton Keynes, Bucks

Post Wed Dec 20, 2006 2:22 pm

320Touring wrote:I thought the e28 diff wasnt a straight swap with the e30 one? IE the coverplate and possibly case are different?
From what i have read the medium case e28 one is the same as the large case e30 one. Its the large case e28 one that doesn't fit :mad:
Engine conversions, Auto to manual conversions, parts, servicing etc etc... For anything e30 call 07718 901737
320Touring
E30 Zone Team Member
E30 Zone Team Member
Posts: 12316
Joined: Fri Feb 11, 2005 11:00 pm
Location: Glasgow (Scotland)

Post Wed Dec 20, 2006 2:23 pm

SPADGE wrote:
320Touring wrote:I thought the e28 diff wasnt a straight swap with the e30 one? IE the coverplate and possibly case are different?
From what i have read the medium case e28 one is the same as the large case e30 one. Its the large case e28 one that doesn't fit :mad:
is the 525e not fitted with a large case diff then?
The big Unit Parts Clear out Make me an offer on parts!
http://www.e30zone.net/modules.php?name ... 81#2766881
SPADGE
Married to the E30 Zone
Married to the E30 Zone
Posts: 7373
Joined: Wed Aug 09, 2006 11:00 pm
Location: Milton Keynes, Bucks

Post Wed Dec 20, 2006 2:28 pm

320Touring wrote:
SPADGE wrote:
320Touring wrote:I thought the e28 diff wasnt a straight swap with the e30 one? IE the coverplate and possibly case are different?
From what i have read the medium case e28 one is the same as the large case e30 one. Its the large case e28 one that doesn't fit :mad:
is the 525e not fitted with a large case diff then?
I doubt it mate
I think just the 3.5's and maybe some 2.8's
Engine conversions, Auto to manual conversions, parts, servicing etc etc... For anything e30 call 07718 901737
johnl320
E30 Zone Addict
E30 Zone Addict
Posts: 3124
Joined: Mon Jan 10, 2005 11:00 pm
Location: Hampshire

Post Wed Dec 20, 2006 3:00 pm

Cheers for the replies fellas, I've got the front two started and jacked it up wiggled it about but still no joy. Will try again tomorrow. I feel like I've gone ten rounds with Stevetigger

the offending item
Image
bastard thing :cry:

john
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Wed Dec 20, 2006 3:05 pm

Johnl320,What ratio is this 525e diff,please?
johnl320
E30 Zone Addict
E30 Zone Addict
Posts: 3124
Joined: Mon Jan 10, 2005 11:00 pm
Location: Hampshire

Post Wed Dec 20, 2006 3:08 pm

Its a 3.07 mate. Wooohooo no longer a newbie

john
320Touring
E30 Zone Team Member
E30 Zone Team Member
Posts: 12316
Joined: Fri Feb 11, 2005 11:00 pm
Location: Glasgow (Scotland)

Post Wed Dec 20, 2006 3:10 pm

3.07? what engine and box you running mate?
The big Unit Parts Clear out Make me an offer on parts!
http://www.e30zone.net/modules.php?name ... 81#2766881
Jon_Bmw
Dangerous when thinking
Dangerous when thinking
Posts: 7604
Joined: Tue Jan 11, 2005 11:00 pm
Location: Salisbury

Post Wed Dec 20, 2006 3:13 pm

Jon when changing mine for a like to like diff i intially had the same problems, very nearly resorted to re-drilling more mounting holes :eek: :twisted: but resisted the urge and pushed it harder up with the trolloy jack, the rear beam then moves and it slots in, it then bolted up. I know you already know all this, just stick with it and leave the power tools in the house winkeye

So how is the rest of it going, what stage are you now at? I'm feeling a trip up to andover at some point :D
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Wed Dec 20, 2006 3:14 pm

Thanks,I am half looking for a 3.79!!
johnl320
E30 Zone Addict
E30 Zone Addict
Posts: 3124
Joined: Mon Jan 10, 2005 11:00 pm
Location: Hampshire

Post Wed Dec 20, 2006 3:21 pm

320Touring wrote:3.07? what engine and box you running mate?
M30 735 lump, e28 m535 flywheel, dogleg box :thumb:
johnl320
E30 Zone Addict
E30 Zone Addict
Posts: 3124
Joined: Mon Jan 10, 2005 11:00 pm
Location: Hampshire

Post Wed Dec 20, 2006 3:25 pm

Jon_Bmw wrote:Jon when changing mine for a like to like diff i intially had the same problems, very nearly resorted to re-drilling more mounting holes :eek: :twisted: but resisted the urge and pushed it harder up with the trolloy jack, the rear beam then moves and it slots in, it then bolted up. I know you already know all this, just stick with it and leave the power tools in the house winkeye

So how is the rest of it going, what stage are you now at? I'm feeling a trip up to andover at some point :D
Alright Jon mate, Its getting trailered up to my work in Warminster mid january where it will finally meet the engine and box. Main things left to do are 1. source rad. 2. fabricate prop 3. fabricate gearbox mount ( ain't payin for an M3 one) :cry:

Welcome to come up for a brew anytime fella

regards

john
320Touring
E30 Zone Team Member
E30 Zone Team Member
Posts: 12316
Joined: Fri Feb 11, 2005 11:00 pm
Location: Glasgow (Scotland)

Post Wed Dec 20, 2006 3:28 pm

johnl320 wrote:
320Touring wrote:3.07? what engine and box you running mate?
M30 735 lump, e28 m535 flywheel, dogleg box :thumb:
cool,cool! just asking as I'd been told that the eta (525e) diffs were too long for use with an m20 gearbox...

I know that the m50 conversions can use a big diff (3.25 or lower) due to the gearboxes having a 5th gear at 1:1 ratio.
The big Unit Parts Clear out Make me an offer on parts!
http://www.e30zone.net/modules.php?name ... 81#2766881
johnl320
E30 Zone Addict
E30 Zone Addict
Posts: 3124
Joined: Mon Jan 10, 2005 11:00 pm
Location: Hampshire

Post Wed Dec 20, 2006 3:30 pm

320Touring wrote:
johnl320 wrote:
320Touring wrote:3.07? what engine and box you running mate?
M30 735 lump, e28 m535 flywheel, dogleg box :thumb:
cool,cool! just asking as I'd been told that the eta (525e) diffs were too long for use with an m20 gearbox...

I know that the m50 conversions can use a big diff (3.25 or lower) due to the gearboxes having a 5th gear at 1:1 ratio.
yeah my dogleg is 1:1 in top

regards

john
320Touring
E30 Zone Team Member
E30 Zone Team Member
Posts: 12316
Joined: Fri Feb 11, 2005 11:00 pm
Location: Glasgow (Scotland)

Post Wed Dec 20, 2006 3:49 pm

johnl320 wrote:
320Touring wrote:
johnl320 wrote: M30 735 lump, e28 m535 flywheel, dogleg box :thumb:
cool,cool! just asking as I'd been told that the eta (525e) diffs were too long for use with an m20 gearbox...

I know that the m50 conversions can use a big diff (3.25 or lower) due to the gearboxes having a 5th gear at 1:1 ratio.
yeah my dogleg is 1:1 in top

regards

john
gonna be some fooking machine then :D :cool:
The big Unit Parts Clear out Make me an offer on parts!
http://www.e30zone.net/modules.php?name ... 81#2766881
johnl320
E30 Zone Addict
E30 Zone Addict
Posts: 3124
Joined: Mon Jan 10, 2005 11:00 pm
Location: Hampshire

Post Wed Dec 20, 2006 4:22 pm

320Touring wrote:
johnl320 wrote:
320Touring wrote: cool,cool! just asking as I'd been told that the eta (525e) diffs were too long for use with an m20 gearbox...

I know that the m50 conversions can use a big diff (3.25 or lower) due to the gearboxes having a 5th gear at 1:1 ratio.
yeah my dogleg is 1:1 in top

regards

john
gonna be some fooking machine then :D :cool:
Yeah when I eventually get it finished, its been two years to far but it did start out as a 316 carb auto :o: I'm going for the chrome turd sleeper look.
Image
Image
320Touring
E30 Zone Team Member
E30 Zone Team Member
Posts: 12316
Joined: Fri Feb 11, 2005 11:00 pm
Location: Glasgow (Scotland)

Post Wed Dec 20, 2006 4:57 pm

sleeeper :cool:
The big Unit Parts Clear out Make me an offer on parts!
http://www.e30zone.net/modules.php?name ... 81#2766881
Jon_Bmw
Dangerous when thinking
Dangerous when thinking
Posts: 7604
Joined: Tue Jan 11, 2005 11:00 pm
Location: Salisbury

Post Wed Dec 20, 2006 5:31 pm

johnl320 wrote:
Jon_Bmw wrote:Jon when changing mine for a like to like diff i intially had the same problems, very nearly resorted to re-drilling more mounting holes :eek: :twisted: but resisted the urge and pushed it harder up with the trolloy jack, the rear beam then moves and it slots in, it then bolted up. I know you already know all this, just stick with it and leave the power tools in the house winkeye

So how is the rest of it going, what stage are you now at? I'm feeling a trip up to andover at some point :D
Alright Jon mate, Its getting trailered up to my work in Warminster mid january where it will finally meet the engine and box. Main things left to do are 1. source rad. 2. fabricate prop 3. fabricate gearbox mount ( ain't payin for an M3 one) :cry:

Welcome to come up for a brew anytime fella

regards

john
Excellent, so perhaps i shall pop over easter time, have a wee glance.

Tea, bah. :cry: Blackcurrent :D :D :cool:

I'm such a kid!
johnl320
E30 Zone Addict
E30 Zone Addict
Posts: 3124
Joined: Mon Jan 10, 2005 11:00 pm
Location: Hampshire

Post Wed Dec 20, 2006 5:35 pm

Only have summer fruits in this house if thats alright :lol:
Jon_Bmw
Dangerous when thinking
Dangerous when thinking
Posts: 7604
Joined: Tue Jan 11, 2005 11:00 pm
Location: Salisbury

Post Wed Dec 20, 2006 5:53 pm

johnl320 wrote:Only have summer fruits in this house if thats alright :lol:
It'll suffice :wink: , or get your misses to go to tesco beforehand!!!! HAHA
johnl320
E30 Zone Addict
E30 Zone Addict
Posts: 3124
Joined: Mon Jan 10, 2005 11:00 pm
Location: Hampshire

Post Wed Dec 20, 2006 6:55 pm

If I can get her off her fat arse :wink:
User avatar
exup
Boost Junkie
Posts: 351
Joined: Tue Mar 08, 2005 11:00 pm

Post Wed Dec 20, 2006 7:40 pm

Hi
When i fitted the 525 eta dif in my 320/ 327 e30 it would fitt as well ,
:x :x
then i realized if you undo the prop shaft centre bearing and pull it to wards the gearbox it will fall in
, u have to prep load the prop any way , good luck fella
there very tall , gearing ok om a 2.7 poss 2.5 but go good on a 2l IMHO :D
johnl320
E30 Zone Addict
E30 Zone Addict
Posts: 3124
Joined: Mon Jan 10, 2005 11:00 pm
Location: Hampshire

Post Wed Dec 20, 2006 10:27 pm

exup wrote:Hi
When i fitted the 525 eta dif in my 320/ 327 e30 it would fitt as well ,
:x :x
then i realized if you undo the prop shaft centre bearing and pull it to wards the gearbox it will fall in
, u have to prep load the prop any way , good luck fella
there very tall , gearing ok om a 2.7 poss 2.5 but go good on a 2l IMHO :D
Prop isn't on the car yet mate, but cheers anyway

john
jmc330i
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6621
Joined: Mon Jan 10, 2005 11:00 pm
Location: Somerset

Post Wed Dec 20, 2006 11:42 pm

SPADGE wrote:
320Touring wrote:I thought the e28 diff wasnt a straight swap with the e30 one? IE the coverplate and possibly case are different?
From what i have read the medium case e28 one is the same as the large case e30 one. Its the large case e28 one that doesn't fit :mad:
E30 large case = E28 medium case. The rear cover and output flanges need changing for the E30 items and it will fit no problems.


Keep at it John, it will fit. The first diff I changed myself was on my touring, I had broke my fingers undoing the prop bolts, so my brother did the heavy work with the diff. He spent about 20mins under the car and then asked me if I was having a laugh.

Another 15-20mins of pissing around with the jack, lowering and raising the diff and we had it bolted upto the beam. Its just one of those things.

Theres probably a 'proper' way of doing it, but now Ive changed diffs a few times that way, I can get it no problems.
James
'91 325i Sport
'93 318i touring 16v
johnl320
E30 Zone Addict
E30 Zone Addict
Posts: 3124
Joined: Mon Jan 10, 2005 11:00 pm
Location: Hampshire

Post Thu Dec 21, 2006 4:19 pm

Diff on. Praise the lord only took ten minutes to get the 4 beam bolts in and the rear mount! So what the f*ck was I playing at yesterday?

cheers for the advice fellas

john