The top..........

And the bottom.........

Bit of t-cut and a brillo pad'll sort that out
Moderator: martauto






[img]http://






2-3 litres a weekJesus325iTouring wrote:Kam,no mate,i'm just exaggerating,it's only done 229,965![]()
Pal,yes it was still running,of a fashion,low on power,pissing oil out the crank seal (2-3 litres a week) and pressurising the coolant.
Going to get it pressure tested in the new year to determine if it's any good still.
[img]http://

That looks loverly Kam,if mine isn't fooked,it'll be bought back up to that standard.kam-325i wrote:i did not think B25 heads last that long !!!!!!!
At least youve got this to look forward too......
MMmmmmm....Shiny.....and going back on mine soon........


Was pretty bad,it's always leaked oil,which has kept my chassis perfect,but over the last few months it had really gotten bad.Pal318is wrote:2-3 litres a weekJesus325iTouring wrote:Kam,no mate,i'm just exaggerating,it's only done 229,965![]()
Pal,yes it was still running,of a fashion,low on power,pissing oil out the crank seal (2-3 litres a week) and pressurising the coolant.
Going to get it pressure tested in the new year to determine if it's any good still.![]()
Bleeding'ek



I wish !!!!Jesus325iTouring wrote:That looks loverly Kam,if mine isn't fooked,it'll be bought back up to that standard.kam-325i wrote:i did not think B25 heads last that long !!!!!!!
At least youve got this to look forward too......
MMmmmmm....Shiny.....and going back on mine soon........
Did you do that yourself?



The bores are pretty good to be honest,the actuall "engine" if you like was in great fettle,no knocks rattles or anything,it was just those few issues which made it to expensive to repair.gcorky wrote:plenty of carbon there...what the bores like?


No chance...I would not let them turn 2" of 1/2 Whitworth.....DanThe wrote:Head Technique was it by any chance?








