Hi All
Right, My central locking is cooked i tried the "red/black wire thing but ended up with burning wire, thing there's a short somewhere so I'm ripping the old out and fitting all new!!
That's not the issue!!
On a convertible when you close the doors should the window not slided down a few mm and then back up again once closed?? if not how the heck do you stop it catching the roof all the time!!
Second, When i turn on my front fogs the side lights come one and the fogs don't ????
Thinking I have electrical gremlins in the old girl (she is 20 after all!) Help please I have to get it all working before it's kitted, slammed and off to the body shop for a euro face lift!
Convertible window help + fogs?
Moderator: martauto
-
DaveGT
- E30 Zone Regular

- Posts: 333
- Joined: Fri Dec 15, 2006 11:00 pm
- Location: Northamptonshire
Health and Safety Officer: "What would happen if a cameraman were to slip over?"
Clarkson: "Well, he'd probably have to stand back up again"
Clarkson: "Well, he'd probably have to stand back up again"
-
Chris-W
- E30 Zone Team Member

- Posts: 7219
- Joined: Tue May 24, 2005 11:00 pm
- Location: South Cheshire
-
DaveGT
- E30 Zone Regular

- Posts: 333
- Joined: Fri Dec 15, 2006 11:00 pm
- Location: Northamptonshire
Is there an after market kit i can get cause it's a pain in the butt!DaveGT wrote:
On a convertible when you close the doors should the window not slided down a few mm and then back up again once closed?? if not how the heck do you stop it catching the roof all the time!!
Not on an E30, I'm afraid. E36 onwards.
Health and Safety Officer: "What would happen if a cameraman were to slip over?"
Clarkson: "Well, he'd probably have to stand back up again"
Clarkson: "Well, he'd probably have to stand back up again"
-
GDBN
- E30 Zone Camper

- Posts: 1415
- Joined: Fri Apr 08, 2005 11:00 pm
- Location: Copenhagen
Afraid not. I looked at doing this some time ago.
You need sensors in the door handles that trigger the window.
Sure it can be done though.
G
You need sensors in the door handles that trigger the window.
Sure it can be done though.
G
-
orangecurry
- E30 Zone Addict

- Posts: 2518
- Joined: Mon Apr 11, 2005 11:00 pm
- Location: West Sussex
the windows should not catch the roof - mine don't. It implies the windows/roof are adjusted incorrectly.
A short-term solution is to close the door by pushing the top of the window rather than the door handle - this 'inclines' the glass slightly and will clear the roof fabric.
A short-term solution is to close the door by pushing the top of the window rather than the door handle - this 'inclines' the glass slightly and will clear the roof fabric.
-
lukescott
- E30 Zone Regular

- Posts: 665
- Joined: Sat Aug 26, 2006 11:00 pm
- Location: Dublin. N 53'23.311' W 006'06.242
Windows dont catch roof on my cab

-
DaveGT
- E30 Zone Regular

- Posts: 333
- Joined: Fri Dec 15, 2006 11:00 pm
- Location: Northamptonshire
URM....Mine's an '87 hood has seen better days, It's only catching about 2mm not sure if it's the hood or if the windows need adjusting a little she is an old girl after all that needs some care!!
Health and Safety Officer: "What would happen if a cameraman were to slip over?"
Clarkson: "Well, he'd probably have to stand back up again"
Clarkson: "Well, he'd probably have to stand back up again"
-
Nelly
- Gumbo

- Posts: 4239
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Divorce Central
If you remove the door card and pull back the plastic anti-moisture film, you'll see all the relevant mounts for the window mech, in the area of where the winder handle "would be" you'll see a 13mm nut which allows you to adjust the window travel - there's also 2x Nylon bump stops involved to actually stop the window at max + min.
These bump stops can easily fall out into the bottom of the door - if so - here lies your problem
Neil.
These bump stops can easily fall out into the bottom of the door - if so - here lies your problem
Neil.


