Pre or Post facelift
Moderator: martauto
-
gary
- E30 Zone Regular

- Posts: 655
- Joined: Tue Feb 08, 2005 11:00 pm
post I believe
-
323i_rare
Thanks guys, that was VERY quick. I was wondering whats the best way to source an M30 engine for the famous conversion. I have checked cars for sale but for a 3.5 lump and manual box they go for £1000 or so on autotrader. Could you break a car like this and make the money back?
-
Theo
- Old Skooler

- Posts: 10735
- Joined: Wed Jun 01, 2005 11:00 pm
- Location: Kent
Check ebay out - get an e34 535i manual, drive it to check out the engine and box are ok, can get them for way less that £1000. But bear in mind all the other bits you will need - engine mounts £100, m3 prop £100 etc etc
-
Falkster
- Engaged to the E30 Zone

- Posts: 5787
- Joined: Fri Sep 30, 2005 11:00 pm
- Location: Yorkshire
Anyother model I would say post but for the 325 sport I would always say Tech1
-
Andyboy
- Alpina Colada
- Posts: 12577
- Joined: Mon Sep 11, 2006 11:00 pm
- Location: Notts
The Convertibles were facelifted in October 1990 and kept the chrome bumpers and small tail lights until then. One of the big differences made in the facelift (9/1987, E reg) is that the rear wheelarches were lowered (i.e bigger distance between the arch lip and the rear side windows). Convertibles (not the Baur) had these lower arches from day one (1985).
I've no Idea why BMW did this.
I've no Idea why BMW did this.
-
pacerpete
- E30 Zone Team Member

- Posts: 18165
- Joined: Sun Jan 23, 2005 11:00 pm
- Location: Iver heath. South bucks.
The reason the arches were lowered was to give the rust bug more to chew on...... 
-
mrLEE30
- E30 Zone Team Member

- Posts: 6589
- Joined: Tue Jan 18, 2005 11:00 pm
- Location: Sweating buckets in Bahrain
i thought the arches were changed because the rear seat bench was changed to give more rear leg room, thus the arch had to change to suit.
andy are you saying that all convertables even the pre-lift ones have the later type arches?? only want to know as people keep aksing the question about fitting tech 2 bumpers to preface lift cabs, if the arches are all the same accross the board then this makes fitting the tech 2 bumpers a doddle!
mrlee
andy are you saying that all convertables even the pre-lift ones have the later type arches?? only want to know as people keep aksing the question about fitting tech 2 bumpers to preface lift cabs, if the arches are all the same accross the board then this makes fitting the tech 2 bumpers a doddle!
mrlee

-
Andyboy
- Alpina Colada
- Posts: 12577
- Joined: Mon Sep 11, 2006 11:00 pm
- Location: Notts
Yep, all cabs have the later arches.
