I have a 1989 318i, and have just changed the gearbox. We loosened engine mounts, removed everything behind gearbox ie prop/selector/exhaust etc, tilted engine back, and removed the box.
We also removed the starter motor, moved the AFM to the side to get at the starter motor, and that little support bracket under the inlet manifold to get to the starter motor.
We disconnected the battery when working on the starter motor.
Now all is back in place, the car turns over great but doesn't start? Even when bump starting from a 30mph tow, it still just goes "bvvvvvvvv" and doesn't start it just engine brakes the car in front
The exhaust smells petrolly after starting, but I doubt this is the most accurate way of determining fuel flow.
One thing I noticed is that there is a small plug right near the AFM, coming up the air inlet pipe and splits off from the wire going to the AFM plug. This small plug is not connected to anything and I can't see anything it should connect to, is it always hanging loose?
Also, I couldn't see a main engine earth strap anywhere, should there be one? The car ran fine before this work so I am struggling to see how there is a big problem.
Everything on the car works fine, windows, lights, heater, and starter motor, but the damn thing just turns over nicely without catching or even spluttering.
Any suggestions what it could be or what to try and check (also tell me how to check please! I've done loads of in depth car work but never simple stuff like this).
Please help as I need to car running ASAP.
Cheers guys!







