e32 730i
Moderator: martauto
-
gooner1
- Out humping Reindeer
- Posts: 13280
- Joined: Fri Apr 14, 2006 11:00 pm
- Location: Northampton.For my sins.
Anything worth taking off the above for the m30 conversion.Its an 88 car btw.Thanks all.
-
mrLEE30
- E30 Zone Team Member
- Posts: 6589
- Joined: Tue Jan 18, 2005 11:00 pm
- Location: Sweating buckets in Bahrain
the M30 part of it!!
-
gooner1
- Out humping Reindeer
- Posts: 13280
- Joined: Fri Apr 14, 2006 11:00 pm
- Location: Northampton.For my sins.
Thanks for that mr LEE. Hope there,s a big f/off scorpion in your boots 
-
Andyboy
- Alpina Colada
- Posts: 12578
- Joined: Mon Sep 11, 2006 11:00 pm
Are you using a 3 litre M30 then??
-
Ant
- Retired Team Member
- Posts: 10496
- Joined: Tue Dec 21, 2004 11:00 pm
- Location: PD+E dept :D
Cant see the point TBH dude, M30B30 is barely more poky than a decent high comp 2.5, add in the weight penalty and I see no real gain
335 or bust
the work involved is the same, but the gains are greater
335 or bust
the work involved is the same, but the gains are greater
Product Development and Endurance for Delphi.
Original performance chips, original works not unlicensed copies
Email FTW
Original performance chips, original works not unlicensed copies
Email FTW-
Andyboy
- Alpina Colada
- Posts: 12578
- Joined: Mon Sep 11, 2006 11:00 pm
Mind you, 192 standard and the cam in these is so tame it would run away if you shouted at it. It'd be good with a snail and MS.
-
gooner1
- Out humping Reindeer
- Posts: 13280
- Joined: Fri Apr 14, 2006 11:00 pm
- Location: Northampton.For my sins.
Sorry didnt explain that very well, i already have 535i sport engine was just wondering about things like flywheels
hoses diffs gearbox anything really.,
hoses diffs gearbox anything really.,
-
Ant
- Retired Team Member
- Posts: 10496
- Joined: Tue Dec 21, 2004 11:00 pm
- Location: PD+E dept :D
Now you're talkingsnail and MS
Product Development and Endurance for Delphi.
Original performance chips, original works not unlicensed copies Email FTW
Original performance chips, original works not unlicensed copies
Email FTW-
Andyboy
- Alpina Colada
- Posts: 12578
- Joined: Mon Sep 11, 2006 11:00 pm
Is your 730i a manual? In which case the gearbox is the same as a 3.5 and you have a dual mass flywheel. The only bits that swap over to the 3.5 engine wise are...the air flow meter....er....throttle body.........gooner1 wrote:Sorry didnt explain that very well, i already have 535i sport engine was just wondering about things like flywheels
hoses diffs gearbox anything really.,
If you still have a complete car I might have to come and rob some bits.
-
gooner1
- Out humping Reindeer
- Posts: 13280
- Joined: Fri Apr 14, 2006 11:00 pm
- Location: Northampton.For my sins.
What bits are you after Andy?
-
Andyboy
- Alpina Colada
- Posts: 12578
- Joined: Mon Sep 11, 2006 11:00 pm
There's not much I need tbh, I run a manual 730i and I broke up a 735i Auto a few weeks back so I already have a mountain of bits. Have u got the whole car or is she in a breakers?
-
gooner1
- Out humping Reindeer
- Posts: 13280
- Joined: Fri Apr 14, 2006 11:00 pm
- Location: Northampton.For my sins.
Breakers mate.Just that i happen to have first shout on bits.
-
Andyboy
- Alpina Colada
- Posts: 12578
- Joined: Mon Sep 11, 2006 11:00 pm
Aaaah. Okay, no worries. I was in a breakers the other day near Banbury (Smiths of Bloxham) and there were several E32's in there - lots of E34's too including a LHD 535i with a buggered gearbox and a 535i Sport.
-
gooner1
- Out humping Reindeer
- Posts: 13280
- Joined: Fri Apr 14, 2006 11:00 pm
- Location: Northampton.For my sins.
Keep meaning to make a trip there myself.Thanks for that.
-
mrLEE30
- E30 Zone Team Member
- Posts: 6589
- Joined: Tue Jan 18, 2005 11:00 pm
- Location: Sweating buckets in Bahrain
sorry mate and we wear sandles for that very reason!!!
and we wear sandles for that very reason!!!