Direct Starter Motor

[Quaser]

Hi

I need to connect the starter motor direct cause i think the ignition switch is broken!

So, which pole on the starter motor do i need connect to the battery?

Thanks

Q

[Brianmoooore]

Black/yellow wire is the starter wire.
You can access it at pin 11 of the diagnostic plug, at a single pole plug and socket above the glove box, or the plug and socket clipped onto the steering column.

[Widge]

Or you can just short the solenoid contacts on the starter with a screwdriver, I suggest one with a big plastic handle and some gloves.


Entirly at you risk or you may end up like this

[Brianmoooore]

Service connector is easiest, especially as you have 12V+ on pin 14.
Just short 11 and 14 to work starter.