is there any one out there who knows what the gap size is on my tappets which i need to adjust e30 325i auto any help pls guystappets
Moderator: martauto
-
brightonbmw
- E30 Zone Newbie

- Posts: 6
- Joined: Sat Oct 21, 2006 11:00 pm
is there any one out there who knows what the gap size is on my tappets which i need to adjust e30 325i auto any help pls guys-
fugazi33
- E30 Zone Newbie

- Posts: 213
- Joined: Sat Sep 09, 2006 11:00 pm
- Location: Bucks
Hello
0.25 cold / 0.30 hot, go say hello in the general section 
-
orangecurry
- E30 Zone Addict

- Posts: 2518
- Joined: Mon Apr 11, 2005 11:00 pm
- Location: West Sussex
according to Bentley
warm 0.30mm (0.012 in)
cold 0.25 (0.010 in)
warm 0.30mm (0.012 in)
cold 0.25 (0.010 in)
-
orangecurry
- E30 Zone Addict

- Posts: 2518
- Joined: Mon Apr 11, 2005 11:00 pm
- Location: West Sussex
damn!
too slow
too slow
-
fugazi33
- E30 Zone Newbie

- Posts: 213
- Joined: Sat Sep 09, 2006 11:00 pm
- Location: Bucks
-
brightonbmw
- E30 Zone Newbie

- Posts: 6
- Joined: Sat Oct 21, 2006 11:00 pm
cold or hot is there a tool for it as it looks a bit tight to get feeler tool down
-
brightonbmw
- E30 Zone Newbie

- Posts: 6
- Joined: Sat Oct 21, 2006 11:00 pm
is it the same for inlet and exhaust
-
fugazi33
- E30 Zone Newbie

- Posts: 213
- Joined: Sat Sep 09, 2006 11:00 pm
- Location: Bucks
Both inlet & exhaust are the same, most people set the tappets cold, you can buy angled feeler gauges but bend the one you've got.
Last edited by fugazi33 on Fri Dec 15, 2006 8:23 pm, edited 1 time in total.
