ok guys i got a 320 cab. doing a manual conversion this week. just checking if i have missed any parts
gearbox
tailshaft
master cylinder
slave cylinder
pedal box
flywheel
clutch
anything else? also will it bolt on to the 525e block as im doing the 2.7 litre upgrade at the same time
manual conversion
Moderator: martauto
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Gearbox crossmember, reverse light loom.
Bolts onto 525e block OK.
Your original diff. will be not ideal at all for the 2.7.You'll effectively have a four speed box, as first will be pointless.
Bolts onto 525e block OK.
Your original diff. will be not ideal at all for the 2.7.You'll effectively have a four speed box, as first will be pointless.
-
gazza
- E30 Zone Camper

- Posts: 1266
- Joined: Tue Feb 08, 2005 11:00 pm
- Location: north london/herts
bri when you say reverse light loom where is the loom on a auto and is it just a case of wiring it to the manual box plug doing this conversion myself
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
It's only a short loom that goes down through the same grommet in the floorpan as the gearlever, along the gear linkage and onto the side of the gearbox.
Plugs into a socket near the bottom of the gearlever.
Plugs into a socket near the bottom of the gearlever.
-
mrgtsx
- E30 Zone Newbie

- Posts: 82
- Joined: Mon Nov 06, 2006 11:00 pm
ah yes the lom i forgot about that thanks
with the diff i wil changer it when more money comes to hand but for now it wil have to do thanks
-
daimlerman
- **BANNED**
- Posts: 15968
- Joined: Mon Feb 27, 2006 11:00 pm
- Location: Grumpy Old Man
Water pump?The one that came with my eta block was different enough for the hoses not to fit.Easy to change on the garage floor but tricky in the car....
