look down the page for someone called iaink
http://forums.eurocca.net/showthread.php?t=6358&page=3
interesting!
Interesting reading on 2.7's and other things!
Moderator: martauto
-
reggid
- E30 Zone Squatter

- Posts: 1984
- Joined: Mon Jul 11, 2005 11:00 pm
- Location: Oz
i wouldn't bother. You won't find the writeup for a m50 head swap onto a m20 in any forum because it doesn't make sense. I am against the m50 swaps but if you want 24V use the whole lump otherwise don't do half a job.
-
DJ-325I
- E30 Zone Newbie

- Posts: 46
- Joined: Sun Feb 26, 2006 11:00 pm
- Location: Abingdon, Oxfordshire
would be interesting if someone in the u.k pulled it off, im sure it wouldn't be tht difficult appart from lining everything up and the electronics. put megasquirt on it and sum bike throttle bodies it would be an e30 m3 killer! 
-
Motorhole
- E30 Zone Addict

- Posts: 2395
- Joined: Tue Jul 12, 2005 11:00 pm
- Location: Cheshire
aye somebody once mentioned to me that it was possible to stick an M50 head on an M20. Don't know if its bullshit or not though! May be desirable in the future if racing in a classic series though, and the rules dictate you need to retain your original block.
