What do people make of this heat shield?
Moderator: martauto
-
NIX
- E30 Zone Camper

- Posts: 1409
- Joined: Wed Jul 27, 2005 11:00 pm
- Location: Twickenham
Can't decide whether its worth getting a cone filter such as an ITG or just get an ITG/K&N replacement panel filter. I know this has been discussed lots of times, usually with really mixed views. Some say only get a cone if you have enough cold air feeds whilst others say it shouldn't be a problem. I think a cone would look cool and sound good but am not interested in getting one if thats all it does.
Anyways, came across this on ebay:
http://cgi.ebay.com/ebaymotors/BMW-E30- ... enameZWD2V
Anyone got one? What do you guys reckon? Worth getting along with a cone filter?
Cheers,
Nick
Anyways, came across this on ebay:
http://cgi.ebay.com/ebaymotors/BMW-E30- ... enameZWD2V
Anyone got one? What do you guys reckon? Worth getting along with a cone filter?
Cheers,
Nick

-
fuzzy
- He who sleeps with "Gingers"
- Posts: 14351
- Joined: Sat Jun 04, 2005 11:00 pm
- Location: melbourne Australia
ive got a cone filter but not a heat shield,i have no figures to prove performance wise and ive never used anything else but adding the heatshield can only help as long as you have good cold air ducted to it.my engine is obviously slightly different to yours though 
-
NIX
- E30 Zone Camper

- Posts: 1409
- Joined: Wed Jul 27, 2005 11:00 pm
- Location: Twickenham
Lol!
Yeah yours is red isn't it?
Yeah yours is red isn't it?

-
oguz327
- Captain Armco

- Posts: 4174
- Joined: Tue Oct 25, 2005 11:00 pm
- Location: Hampshire
Do you really need a heat shield though?
There been a lot of talk about this this before and i think i remember Sal saying that its only in heavy traffic the under bonnet temperatures are much higher (at least in the e30) which is when performance is not an issue.
Anyone got any before and after feedback?
There been a lot of talk about this this before and i think i remember Sal saying that its only in heavy traffic the under bonnet temperatures are much higher (at least in the e30) which is when performance is not an issue.
Anyone got any before and after feedback?
-
garyp_E30_325i
- E30 Zone Regular

- Posts: 724
- Joined: Mon Jun 20, 2005 11:00 pm
- Location: Sunny (I wish!) Glasgow
I was losing power with a bare K&N 67i. I made a heat shield myself using aluminium extrusion from B&Q (plumbing), it was OK for low/med revs but at high revs it was restricting air flow (I could feel it chocking her). I looked at generic heat shields but didn't see this (good find) so I went down the BMC CDA route - expensive way of solving the problem! If I'd seen this then this is what I would've gone for. It's worth trying for the price. Only thing I'd say is it doesn't look like it was an entry position for the cold air feed from the front grille, I'd definitely mod it to accept a cold air feed.
If you go for it let me know how you get on, I'm very interested (for furure ref).
If you go for it let me know how you get on, I'm very interested (for furure ref).
'89 325i - was an SE but not anymore, was bronze-beige metallic (yeuch!) but now techno-violet (thankfully)
'89 Toyota Corolla GTi-16 - track, hillclimb & sprint car (yeeha!)
'08 Buell XB12Ss - American engineering at it's 'best'... good fun though
'89 Toyota Corolla GTi-16 - track, hillclimb & sprint car (yeeha!)
'08 Buell XB12Ss - American engineering at it's 'best'... good fun though
-
NIX
- E30 Zone Camper

- Posts: 1409
- Joined: Wed Jul 27, 2005 11:00 pm
- Location: Twickenham
Yeah will do mate but waiting to see what some of the others think first. Its $40 just to ship to UK so I want to see whether its worth the cash.

-
oguz327
- Captain Armco

- Posts: 4174
- Joined: Tue Oct 25, 2005 11:00 pm
- Location: Hampshire
It does look like a good bit of kit, who is gonna test it out first 
-
NIX
- E30 Zone Camper

- Posts: 1409
- Joined: Wed Jul 27, 2005 11:00 pm
- Location: Twickenham
I'm tempted but need more convincing first. Haven't bought a filter yet! Hoping to get a BBTB at the same time too 

-
JaMMi
- E30 Zone Newbie

- Posts: 36
- Joined: Fri Dec 08, 2006 11:00 pm
Make one yourself!! Then replicate and sell on ebay so I don't have to :p ...
325i 1989 G Reg now for sale. 6 branch (older style) from Zone shop, upwards of £900 spent at MOT April 2007 with brand new exhaust and two new tyres, very low mileage since due to company car. PM or email jammi@btopenworld.com for more info / offers.
-
DaveD
- E30Zone Wiki Specialist
- Posts: 5129
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Sheffield
here is a step by step guide to make your own
i am still not convince by them unless i put in a better cold aior feed
http://www.davelength.net/car/cai.html
i am still not convince by them unless i put in a better cold aior feed
http://www.davelength.net/car/cai.html
-
Templ8e30
- E30 Zone Addict

- Posts: 2801
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Ashton-under-Lyne, Lancashire
It looks ok but the cut-out looks too close to the side of the heatshield restricting airflow, how well does it seal against the bonnet though ?. Not much use if it doesn't seal well.
I made one last year from sheet stainless and it was fully enclosed both sides and at the bottom (the hot alternator is right underneath on a 6-pot), sealed to the body behind the headlights (no plastic cover) and sealed against the inside of the bonnet.
Liam012 bought it with an M30 airflow meter, he may have some photo's.
Cheers,
Iain T
I made one last year from sheet stainless and it was fully enclosed both sides and at the bottom (the hot alternator is right underneath on a 6-pot), sealed to the body behind the headlights (no plastic cover) and sealed against the inside of the bonnet.
Liam012 bought it with an M30 airflow meter, he may have some photo's.
Cheers,
Iain T

2007 Mazda 6 2.0 estate
Political Correctness - A concept based on the idea that its possible to pick up a turd by the clean end !
-
kam-325i
- E30 Zone Team Member

- Posts: 4851
- Joined: Tue Sep 27, 2005 11:00 pm
- Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!
Should it not (the heat shield) be shiny, and not black, as black will absorb heat......causing an heatsoak effect.
Pete don't care about colour, He would shag a rainbow if he could find the end of it....


-
GDBN
- E30 Zone Camper

- Posts: 1415
- Joined: Fri Apr 08, 2005 11:00 pm
- Location: Copenhagen
Black absorbs light not heat .. and some plastics conduct heat less than metal.
It's the metal that creates the heatsoak effect.
But they are really not that necessary.
G
It's the metal that creates the heatsoak effect.
But they are really not that necessary.
G
-
NIX
- E30 Zone Camper

- Posts: 1409
- Joined: Wed Jul 27, 2005 11:00 pm
- Location: Twickenham
Just realised, I work a lot with metal suppliers and fabricators. Don't know why I didn't think of this earlier - Anyone got a template of an effective heat shield? I know it cant be that hard to do, but I also know that a pro would be able to do a proper sweet job of fabricating a heat shield if I had a decent template, and at a nice price too 
I've just ordered an ITG cone filter, even though I had been advised by some to stick with a panel filter, but I ordered it on the basis of getting a heat shield at some point and plenty of cooling pipes, although again some others say this isn't necessary with the ITG but we'll see none the less.
I've just ordered an ITG cone filter, even though I had been advised by some to stick with a panel filter, but I ordered it on the basis of getting a heat shield at some point and plenty of cooling pipes, although again some others say this isn't necessary with the ITG but we'll see none the less.

-
dazleeds
- old skool raver

- Posts: 12883
- Joined: Fri Apr 01, 2005 11:00 pm
- Location: Empire Building @
certainly wouldnt pay that much for it
you could make that for a fiver and hours time
also as Iain said the cutout does look very close to side of sheild
you could make that for a fiver and hours time
also as Iain said the cutout does look very close to side of sheild
www.oldskoolfantasy.co.uk
in the shit,the one to blame,yeh its all my fault ;)
in the shit,the one to blame,yeh its all my fault ;)
-
NIX
- E30 Zone Camper

- Posts: 1409
- Joined: Wed Jul 27, 2005 11:00 pm
- Location: Twickenham
Yeah it went for a lot in the end that heat shield. I reckon I could get one of the guys my company uses to make something that not only does the job but looks the part too i.e. lines up nicely, clean cuts and folds, not to mention add a bit of bling to the bay.

-
dazleeds
- old skool raver

- Posts: 12883
- Joined: Fri Apr 01, 2005 11:00 pm
- Location: Empire Building @
cant hurt to have one thats for sure
plus make it nice and tidy and im sure you could sell a few
plus make it nice and tidy and im sure you could sell a few
www.oldskoolfantasy.co.uk
in the shit,the one to blame,yeh its all my fault ;)
in the shit,the one to blame,yeh its all my fault ;)
-
liam012
- E30 Zone Camper

- Posts: 1424
- Joined: Sun Aug 28, 2005 11:00 pm
i cannot say just how well Iains heatsheild is made and looks to be miles better design than the one in ebay there
will ost pics up soon
will ost pics up soon

-
NIX
- E30 Zone Camper

- Posts: 1409
- Joined: Wed Jul 27, 2005 11:00 pm
- Location: Twickenham
Yeah pics would be great! Reckon there's any chance of a template then?
Daz, yeah not overly interested in selling them but I'll see what the guy says. If there are enough people interested then I'm sure some sort of deal could be made. Depends really on how long it will take to make one as most of the fabricators have got bigger projects to concentrate on.
Daz, yeah not overly interested in selling them but I'll see what the guy says. If there are enough people interested then I'm sure some sort of deal could be made. Depends really on how long it will take to make one as most of the fabricators have got bigger projects to concentrate on.

-
daimlerman
- **BANNED**
- Posts: 15968
- Joined: Mon Feb 27, 2006 11:00 pm
- Location: Grumpy Old Man
I have a cone filter on the 2.7.Claimed to be good for 100,000miles so fit and forget.I folded up a heatshield from ally sheat that er indoors nicked from work(Stagecoach)(its a lie officer)on the principle that its no good putting cold air in to have it heated by the engine bay.I cut a hole in the bottom of the shield to fit the supplied air pipe. On the same basis I removed the water pipe that runs from the thermitwat housing to the back of the block via the throttle body for a pipe that goes direct from thermitwat to back of block.Why force cold air into the throttle body then heat it?Bet that this mod is worth 1bhp!! Temple30s work is awesome,wish I could fabricate like that!!
-
dan_emaps
- E30 Zone Regular

- Posts: 302
- Joined: Wed Aug 17, 2005 11:00 pm
Deffo worth it dude, if your on e36coupe look up a member called Dave F. he contructed similar looking heatshields for many members on the forum with good proven results, however i think his were made from a type of steel with another layer of material round it, a filter in a hot engine bay is a wste of time, the improved surface area will be cancelled out by the heat sucked in.

