Guernay flaps...

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

User avatar
f13ldy
E30 Zone Newbie
E30 Zone Newbie
Posts: 72
Joined: Mon Jul 17, 2006 11:00 pm

Post Fri Dec 08, 2006 6:14 pm

Do these fit the standard M3 rear spoiler?
c76jon
E30 Zone Camper
E30 Zone Camper
Posts: 1130
Joined: Mon Jan 10, 2005 11:00 pm
Location: coventry

Post Fri Dec 08, 2006 6:38 pm

you could if you wanted but it involves screwing thru it into spoiler and they ahve been known to get ripped off by wind at speed due to incorrect fixing

if you look at sport evo rear spoiler you will see the cut out thats in it to allow travel and adjustment and the correct threaded holes for the correct fixings

Image
Image
User avatar
f13ldy
E30 Zone Newbie
E30 Zone Newbie
Posts: 72
Joined: Mon Jul 17, 2006 11:00 pm

Post Sat Dec 09, 2006 12:51 am

And how much would a 2nd sport evo spoiler set me back?

More expense lol.
c76jon
E30 Zone Camper
E30 Zone Camper
Posts: 1130
Joined: Mon Jan 10, 2005 11:00 pm
Location: coventry

Post Sat Dec 09, 2006 7:15 am

oem they are very very rare 2nd hand tho do appear

new about 700 plus

you can buy copies tho there is some shite around

carbon fibre ones are available

i know a good contact for these you can paint them or leave to show weave but again theres different ends of quality scale.the guy i know supplies totally perfect copies with amazing carbon finish

simon has a guerney on his car from the same guy

jon
Image
Nelly
Gumbo
Gumbo
Posts: 4239
Joined: Mon Jan 10, 2005 11:00 pm
Location: Divorce Central

Post Sat Dec 09, 2006 6:48 pm

A guy called "TrackM3" sells copied parts - met him at Silverstone not to long ago - must say that his parts are good as there moulded from the original items - if you look close enough you'll even slightly see the carbon fiber weave.

Hope this helps, Neil.
Image

"I F**KING LOVE YOU GUMBO"
maxfield
Old Skooler
Old Skooler
Posts: 15185
Joined: Sat Nov 26, 2005 11:00 pm
Location: Mansfield

Post Sat Dec 09, 2006 6:51 pm

jon im assuming your talking about markus

www.e30shop.de
Image
c76jon
E30 Zone Camper
E30 Zone Camper
Posts: 1130
Joined: Mon Jan 10, 2005 11:00 pm
Location: coventry

Post Sat Dec 09, 2006 9:25 pm

maxfield wrote:jon im assuming your talking about markus

www.e30shop.de
yes markus

the quality is unreal and im a fussy fecker

the pic above is of his car and his carbon flap

jon
Image
User avatar
M3BOB
E30 Zone Newbie
E30 Zone Newbie
Posts: 158
Joined: Sat Jul 09, 2005 11:00 pm
Location: Kent

Post Mon Dec 11, 2006 10:07 pm

I you want to see one Track M3s, ask him and he'll let you see one, the guy that does our f/g is good, and we are sending the stuff worldwide now. Rear se spoiler with gurney flap £100
Nelly
Gumbo
Gumbo
Posts: 4239
Joined: Mon Jan 10, 2005 11:00 pm
Location: Divorce Central

Post Mon Dec 11, 2006 10:29 pm

^^ Best copies i've seen out there, well impressed with the evo front spliter - spot on.
Image

"I F**KING LOVE YOU GUMBO"
User avatar
M3BOB
E30 Zone Newbie
E30 Zone Newbie
Posts: 158
Joined: Sat Jul 09, 2005 11:00 pm
Location: Kent

Post Mon Dec 11, 2006 10:35 pm

ive just posted a list of our parts in the e30 parts for sale section
User avatar
f13ldy
E30 Zone Newbie
E30 Zone Newbie
Posts: 72
Joined: Mon Jul 17, 2006 11:00 pm

Post Tue Dec 12, 2006 9:50 am

M3BOB wrote:ive just posted a list of our parts in the e30 parts for sale section
LOL...

I'm assuming you're the same bob I emailed the other day about the EVOII splitter.
User avatar
M3BOB
E30 Zone Newbie
E30 Zone Newbie
Posts: 158
Joined: Sat Jul 09, 2005 11:00 pm
Location: Kent

Post Tue Dec 12, 2006 2:56 pm

f13ldy wrote:
M3BOB wrote:ive just posted a list of our parts in the e30 parts for sale section
LOL...

I'm assuming you're the same bob I emailed the other day about the EVOII splitter.

thatll be me
User avatar
m3ben05
E30 Zone Addict
E30 Zone Addict
Posts: 2555
Joined: Tue Sep 27, 2005 11:00 pm
Location: High Wycombe

Post Tue Dec 12, 2006 3:07 pm

Iv seen the copies that M3BOB is making, they are truely excellent and you really cant argue with the price either! Iv also seen the carbon copies that Markus supplies, they are also amazing, but wayyyy more expensive!
Image
Falkster
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5787
Joined: Fri Sep 30, 2005 11:00 pm
Location: Yorkshire

Post Tue Dec 12, 2006 5:16 pm

I bought one from Martin (TrackM3) and its great.....80 quid posted I paid I think!!!
Demlotcrew
E30 Zone Team Member
E30 Zone Team Member
Posts: 13329
Joined: Mon Dec 20, 2004 11:00 pm
Location: East Anglia

Post Tue Dec 12, 2006 5:26 pm

Well im trying to get in touch with M3bob for a SE undertray as i hope to adapt it to fit my car (hartge front valance and SE undertray) :eek:

Andrew
User avatar
M3BOB
E30 Zone Newbie
E30 Zone Newbie
Posts: 158
Joined: Sat Jul 09, 2005 11:00 pm
Location: Kent

Post Tue Dec 12, 2006 10:41 pm

m3 bobs email is bob.hassan@virgin.net
User avatar
harry_p
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5313
Joined: Thu Oct 12, 2006 11:00 pm
Location: norfolk

Post Wed Dec 13, 2006 12:18 am

i have seen a pic of a carbon flap designed specifically for the non se wing, it's a kind of V shape so extends slightly over the top edge of the rear of the wing to make it secure. no idea where it cae from, or where you would get one. plus it would be non adjustable, and from memory sat higher than the se wing in its most upright position.

i have also seen a proper se flap attached to a standard m3 wing. looks a bit odd as the wing doesnt have the cutouts for it so doesnt sit flush, is non adjustable ad means its just screwed into the plastic wing. i'd be woried about it coming loose.

i have an SE copy wing bought from TrackM3, the quality for the money is really very good, moulded from the real thing, you can still read the bmw part numbers on both the flap and the wing, plus all the bolt holes are proper metal threaded inserts bonded into the wing. i prepped and sprayed mine myself in an afternoon using aerosols so it's not 100% perfect, but i have no doubt that a half decent bodyshop would be able to do a fantastic job with little more than a coat of filler primer and a rubdown before paint

Image
Image
User avatar
f13ldy
E30 Zone Newbie
E30 Zone Newbie
Posts: 72
Joined: Mon Jul 17, 2006 11:00 pm

Post Wed Dec 13, 2006 11:46 am

That looks sweet!

Although being f/g have you noticed any cracking?
User avatar
harry_p
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5313
Joined: Thu Oct 12, 2006 11:00 pm
Location: norfolk

Post Wed Dec 13, 2006 11:49 am

nope, doesnt seem to have cracked or crazed, and is probably more resistant to it than the standard rear wing, most of which seem to have horrible paint cracks by now (mine was just starting to go in a couple of places but i've seen lots far worse)

the complete wing weighs probably half as much as a standard one too, the boot now springs open, and the allen bolts they supply to attach the flap are nice stainless steel ones too.
User avatar
f13ldy
E30 Zone Newbie
E30 Zone Newbie
Posts: 72
Joined: Mon Jul 17, 2006 11:00 pm

Post Wed Dec 13, 2006 12:47 pm

Cool...

How much was it?
User avatar
harry_p
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5313
Joined: Thu Oct 12, 2006 11:00 pm
Location: norfolk

Post Wed Dec 13, 2006 1:05 pm

£100

would have prefered a proper sport evo one, but couldnt find one for even half reasonable money, and you'd still have to add prep and paint costs on top.
User avatar
f13ldy
E30 Zone Newbie
E30 Zone Newbie
Posts: 72
Joined: Mon Jul 17, 2006 11:00 pm

Post Wed Dec 13, 2006 1:31 pm

Blimey thats cheap...

Is that including the flap? As I wanna get one of those carbon ones from Markus.
c76jon
E30 Zone Camper
E30 Zone Camper
Posts: 1130
Joined: Mon Jan 10, 2005 11:00 pm
Location: coventry

Post Wed Dec 13, 2006 6:18 pm

for 100 pounds its good value..........

but the surfaces on that are all over the place with all due respect

the highlights show the highs and lows and leading edge would need a lot of work

to get that perfect or as good as oem it would take a lot of work

jon
Image
Andy335Touring
Married to the E30 Zone
Married to the E30 Zone
Posts: 7144
Joined: Sun Jan 09, 2005 11:00 pm
Location: Long Eaton,Nottingham

Post Wed Dec 13, 2006 8:28 pm

c76jon wrote:
but the surfaces on that are all over the place with all due respect

the highlights show the highs and lows and leading edge would need a lot of work

to get that perfect or as good as oem it would take a lot of work

jon
I think it's just the Zones auto re-sizing of the picture thats making it look ify ??

http://img.photobucket.com/albums/v31/i ... 20_700.jpg
c76jon
E30 Zone Camper
E30 Zone Camper
Posts: 1130
Joined: Mon Jan 10, 2005 11:00 pm
Location: coventry

Post Wed Dec 13, 2006 8:31 pm

i can accept that on edges but it wont alter the reflective highlights on surfaces

jon
Image
Chris-W
E30 Zone Team Member
E30 Zone Team Member
Posts: 7219
Joined: Tue May 24, 2005 11:00 pm
Location: South Cheshire

Post Wed Dec 13, 2006 9:04 pm

c76jon wrote:i can accept that on edges but it wont alter the reflective highlights on surfaces

jon
Is that likely to alter it's affect on negative lift?
Image
c76jon
E30 Zone Camper
E30 Zone Camper
Posts: 1130
Joined: Mon Jan 10, 2005 11:00 pm
Location: coventry

Post Wed Dec 13, 2006 9:26 pm

my point being you get what you pay for

in its day a 30k plus car

whats that in todays terms??

by all means push the boat out and throw a oner at it ....

i think the car deserves more

and i think its only right to illustrate that this wont be the same as oem

jon
Image
User avatar
harry_p
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5313
Joined: Thu Oct 12, 2006 11:00 pm
Location: norfolk

Post Wed Dec 13, 2006 11:25 pm

i did say it would need work to be perfect, i also pointed out that its good value. i've seen some of the shit that max power type bodykit people churn out.

i didnt buy an M3 because theyre rare, or were expensive when new. I bought it to DRIVE and enjoy driving. my car is never going to be a concourse winner, and frankly i don't care, therefore the wing looking 100% perfect oem doesnt concern me in the slightest.

f13ldy, yes, that was complete. wing plus flap and bolts. although i'm not 100% sure thats the current price. Maybe they would do it cheaper without the flap too?
User avatar
m3ben05
E30 Zone Addict
E30 Zone Addict
Posts: 2555
Joined: Tue Sep 27, 2005 11:00 pm
Location: High Wycombe

Post Thu Dec 14, 2006 12:05 am

I have to agree with John here, the quality of a rep can never be as good as the real thing.

Dont get me wrong, iv seen M3BOB's reps and the quality is awesome and for £100 you cant go wrong but you get what you pay for with OEM
Image
c76jon
E30 Zone Camper
E30 Zone Camper
Posts: 1130
Joined: Mon Jan 10, 2005 11:00 pm
Location: coventry

Post Thu Dec 14, 2006 4:52 am

harry_p wrote:i did say it would need work to be perfect, i also pointed out that its good value. i've seen some of the shit that max power type bodykit people churn out.

i didnt buy an M3 because theyre rare, or were expensive when new. I bought it to DRIVE and enjoy driving. my car is never going to be a concourse winner, and frankly i don't care, therefore the wing looking 100% perfect oem doesnt concern me in the slightest.

f13ldy, yes, that was complete. wing plus flap and bolts. although i'm not 100% sure thats the current price. Maybe they would do it cheaper without the flap too?
accepted but the fact you dont care when you are DRIVING your car doesnt mean that perspective buyers of said rear spoiler feel the same and its only fair they are aware that this will be substandard

jon
Image
User avatar
f13ldy
E30 Zone Newbie
E30 Zone Newbie
Posts: 72
Joined: Mon Jul 17, 2006 11:00 pm

Post Thu Dec 14, 2006 10:51 am

No-one would buy mine anyway lol...