Annoying Situation

Need technical Q/A then you're in the right place

Moderator: martauto

Cyruz
E30 Zone Newbie
E30 Zone Newbie
Posts: 219
Joined: Sat Oct 15, 2005 11:00 pm
Location: Bournemouth

Post Fri Dec 08, 2006 12:41 am

I'm sorry to keep clogging up the tech section with questions but I'm so close to getting my e30 running again I can taste it! Had her running earlier but running very rich, black smoke...

This is the problem, I've got m3 e36 injectors fitted to the car but the chip I've got to run them is for an 173 ECU and I have a 073, when fitted to my ECU the chip won't let the car start. I was wondering what to do as I really don't want to swap back for standard injectors as these and nice and clean and not cracked and leaking like my old ones.

I've heard that the 173 ECU has 28pins and mine only 24 does this mean I could remove the excess pins from a 173 ECU to allow it run on my loom, seeing as the pins are for electrics my car doesn't have, I guess.

Anyone shed any light on this situation. I know the m3 injectors are 250cc but thats running a higher fuel pressure than the standard m20 2.5 pump can provide, so I have no idea how much they are flowing currently but seems out of reach for the ECU to learn with as it still runs rich.

Thanks
Image
Cyruz
E30 Zone Newbie
E30 Zone Newbie
Posts: 219
Joined: Sat Oct 15, 2005 11:00 pm
Location: Bournemouth

Post Fri Dec 08, 2006 12:37 pm

Bump
Image
jmc330i
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6621
Joined: Mon Jan 10, 2005 11:00 pm
Location: Somerset

Post Fri Dec 08, 2006 12:41 pm

Cyruz wrote:I know the m3 injectors are 250cc but thats running a higher fuel pressure than the standard m20 2.5 pump can provide
Depends on the M3. The 3.2evo runs at 5 bar, but the 3.0ltr runs at 3 bar - the same as the E30 325i.

Any particular reason you are running the M3 injectors?
James
'91 325i Sport
'93 318i touring 16v
WillG
E30 Zone Regular
E30 Zone Regular
Posts: 433
Joined: Wed Mar 29, 2006 11:00 pm
Location: Cheltenham

Post Fri Dec 08, 2006 12:44 pm

dont these injectors use 5 bar amd normal m20 use 3 bar, i think you will need new pressure regulator and fuel pump and then have remap, would put old ones back in and take it for tunning with all the new parts you need myself.
Cyruz
E30 Zone Newbie
E30 Zone Newbie
Posts: 219
Joined: Sat Oct 15, 2005 11:00 pm
Location: Bournemouth

Post Fri Dec 08, 2006 12:49 pm

Only reason I'm running m3 injectors is because I had a set lying around and my old ones were leaking badly. I might have to resort to putting back in the standards as it looks like it's going to be around £250+ to get the car mapped and that's stupid considering it cost me only 3 times that in the first place!
Image
ian332isport
E30 Zone Team Member
E30 Zone Team Member
Posts: 5380
Joined: Wed Dec 22, 2004 11:00 pm
Location: West Sussex

Post Fri Dec 08, 2006 4:47 pm

You can't just fit bigger injectors and expect it to run. Bigger injectors = more fuel = running rich and black smoke = bore wash = knackered engine.

Regardless of fuel pressure, the larger injectors will flow more fuel. You could possibly improve the situation by reducing the fuel pressure, but large injectors and low pressure = poor atomisation and poor running.

Unless you have a very modified engine (standard injectors are know to work okay with around 210bhp), and get it mapped to suit, it will never run 100%.

Find a half decent set of standard injectors and all will be fine.

Ian.
If it aint broke - Modify it...
d6dph
Married to the E30 Zone
Married to the E30 Zone
Posts: 12435
Joined: Sun Aug 14, 2005 11:00 pm
Location: Tiptree. Essex

Post Fri Dec 08, 2006 5:07 pm

I think dobbie has a set for sale on ebay?

Yup, here they are

http://cgi.ebay.co.uk/BMWe30-325i-Injec ... dZViewItem
Image
Speedtouch
Old Skooler
Old Skooler
Posts: 14129
Joined: Tue Feb 14, 2006 11:00 pm
Location: Canterbury

Post Fri Dec 08, 2006 5:16 pm

With the ECU situation, I think the number of pins you're referring to are those of the EPROM (memory chip).
You can't just go removing the excess pins! I believe you can do a conversion to fit a 28-pin EPROM to an earlier 24-pin type, but not sure of the specifics...
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
Cyruz
E30 Zone Newbie
E30 Zone Newbie
Posts: 219
Joined: Sat Oct 15, 2005 11:00 pm
Location: Bournemouth

Post Fri Dec 08, 2006 5:50 pm

Might try running a different ECU first and if that fails then back to standard till I can get it mapped.

I didn't want the injectors to run 100%, I had them lying around and wanted to fit them as they have a better spray pattern and were ultrasonically cleaned.
Image