Painting wheels

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

EOS
E30 Zone Newbie
E30 Zone Newbie
Posts: 215
Joined: Wed Oct 19, 2005 11:00 pm
Location: Eastwood - Essex

Post Thu Dec 07, 2006 7:32 am

Hi, I've got some old wheels in the garden that need a bit of TLC, was going to tidy up the scratchs with the dremel/filler what evers needed then paint/spray them black. What would you use to paint/spray them black? They don't have to be super quality finish so not getting them done properly, but would like something thats not going to flake off straight away?

Cheers
Image
316eyes
E30 Zone Regular
E30 Zone Regular
Posts: 947
Joined: Fri Feb 18, 2005 11:00 pm
Location: Sunny Greece

Post Thu Dec 07, 2006 12:38 pm

Secret of any good paint finish is in the preparation.

Get the surface as flat as possible using progressive grades of wet & dry.

DEGREASE......important if you want the paint to stick.

Several light, even coats of a suitable primer, the better this is the better the final finish.

Flat with 1500 wet & dry.

DEGREASE again.

Several light, even coats of your chosen colour followed by laquer if required, according to the manufacturers recommendations.

Should get you a decent finish on a set of wheels.

Helps if you can find a local place that will shot/bead blast the wheels for you as this will save you hours of work, especially if your doing BBS or similar.

HTH :D AND GOOD LUCK.
I'm not completely perfect.......there are some bits missing or broken.
But the weather here helps!!!
cliffybabe
Powered by Nelly
Powered by Nelly
Posts: 10020
Joined: Sun Dec 18, 2005 11:00 pm
Location: Croydon

Post Thu Dec 07, 2006 1:15 pm

i'd use Hammeright :cool:
Image
Considering Selling the Cabby, looks like its gonna go