General E30 related discussions -
Please put technical questions in E30 Tech Help forum below
Moderator: martauto
-
beardymat
- E30 Zone Squatter

- Posts: 1979
- Joined: Tue Jun 14, 2005 11:00 pm
- Location: sheffield, city of steel, and rust apparently
Post
Wed Dec 06, 2006 6:50 pm
surely the tool that looks like a towing eye is the towing eye
the one referred to in the ad is the silver pin with the grey end.i thought this was a handle for the spark plug wrench though so what do i know?
No longer self employed but still available for welding duties.
-
Speedtouch
- Old Skooler

- Posts: 14129
- Joined: Tue Feb 14, 2006 11:00 pm
- Location: Canterbury
Post
Wed Dec 06, 2006 6:54 pm
Why would they supply an extra towing eye when the car already has one at each end?

-
timmyboy
- E30 Zone Newbie

- Posts: 129
- Joined: Thu Nov 02, 2006 11:00 pm
- Location: ipswich suffolk
Post
Wed Dec 06, 2006 6:54 pm
i used it as a drift to knock off my steering coupling!!!
guess it wasnt designed for that either!!!

(00=[ll]=00)

<embed></embed>
-
gooner1
- Out humping Reindeer
- Posts: 13280
- Joined: Fri Apr 14, 2006 11:00 pm
- Location: Northampton.For my sins.
Post
Wed Dec 06, 2006 6:57 pm
RE the locator tool Mat, think it doubles as both. Certainly fits in the spark plug wrench though, just tried it cos im cleaning tools right now.Sad or what.

-
jmc330i
- Engaged to the E30 Zone

- Posts: 6621
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Somerset
Post
Wed Dec 06, 2006 6:57 pm
So in that auction they are only selling one tool, but have a pic of all those tools that are listed separately
320iSE wrote:Why would they supply an extra towing eye when the car already has one at each end?

The E30 towing eye screws in on the front (and back on Mtech kitted cars).
James
'91 325i Sport
'93 318i touring 16v
-
Speedtouch
- Old Skooler

- Posts: 14129
- Joined: Tue Feb 14, 2006 11:00 pm
- Location: Canterbury
Post
Wed Dec 06, 2006 7:09 pm
I doubt that pin thingy (handle for the spark plug wrench) would be much use for locating the wheel on the hub. I generally just hold it on there, steadying it with a knee then swiftly insert a bolt...
Always preferred good old-fashioned hubs with the studs already in place myself - so much easier for wheel changes.
-
timmyboy
- E30 Zone Newbie

- Posts: 129
- Joined: Thu Nov 02, 2006 11:00 pm
- Location: ipswich suffolk
Post
Wed Dec 06, 2006 7:15 pm
generally just hold it on there, steadying it with a knee then swiftly insert a bolt...
sounds like a line from a really bad german porno!!!!

Last edited by timmyboy on Wed Dec 06, 2006 7:19 pm, edited 1 time in total.
(00=[ll]=00)

<embed></embed>
-
Speedtouch
- Old Skooler

- Posts: 14129
- Joined: Tue Feb 14, 2006 11:00 pm
- Location: Canterbury
Post
Wed Dec 06, 2006 7:17 pm
Phnaar! F*ck it, I'm just gonna use both bits next time I change a wheel

-
gooner1
- Out humping Reindeer
- Posts: 13280
- Joined: Fri Apr 14, 2006 11:00 pm
- Location: Northampton.For my sins.
Post
Wed Dec 06, 2006 7:20 pm
320iSE wrote:I doubt that pin thingy (handle for the spark plug wrench) would be much use for locating the wheel on the hub. I generally just hold it on there, steadying it with a knee then swiftly insert a bolt...
Always preferred good old-fashioned hubs with the studs already in place myself - so much easier for wheel changes.
Wrong mate it works, made changing mine a piece of.
-
Chris-W
- E30 Zone Team Member

- Posts: 7219
- Joined: Tue May 24, 2005 11:00 pm
- Location: South Cheshire
Post
Wed Dec 06, 2006 7:20 pm
320iSE wrote:I generally just hold it on there, steadying it with a knee then swiftly insert a bolt...
Thank god for this tool - I'd always tack-welded the wheel onto the hub, then inserted the studs.
-
Jay-T
- E30 Zone Newbie

- Posts: 98
- Joined: Mon Sep 04, 2006 11:00 pm
- Location: Stockport, Cheshire
Post
Wed Dec 06, 2006 7:28 pm
That tow eye tool is from an E36, not an E30. The bloke "Seller" must have a bin full of surplus tool and has started making up sets to sell on ebay.
I have the same tool in the boot of the E36 Vert.
"But I have been known to be wrong."
Jay-T
-
fuzzy
- He who sleeps with "Gingers"
- Posts: 14351
- Joined: Sat Jun 04, 2005 11:00 pm
- Location: melbourne Australia
Post
Wed Dec 06, 2006 7:35 pm
that looks a bit shady,the add looks like its for all they tools but is only for one,creative advertising

-
Jay-T
- E30 Zone Newbie

- Posts: 98
- Joined: Mon Sep 04, 2006 11:00 pm
- Location: Stockport, Cheshire
Post
Wed Dec 06, 2006 7:35 pm
Sorry folks just re -read the tread, and it's ll about the the long pin type tool. Me thinks!!! that fits the spark plug socket tool and goose between the the locator holes at the top, then rotate the handle anti-clockwise to loosen and remove the plugs.
I hope I have read the thread right this time....
could be wrong again..........
Jay-T
-
jmc330i
- Engaged to the E30 Zone

- Posts: 6621
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Somerset
Post
Wed Dec 06, 2006 8:54 pm
Jay-T wrote:That tow eye tool is from an E36, not an E30. The bloke "Seller" must have a bin full of surplus tool and has started making up sets to sell on ebay.
I have the same tool in the boot of the E36 Vert.
"But I have been known to be wrong."
Granted the pic isnt that good, but it looks the same as the towing eye in both my E30s - they are most likely the same between E30/E36 etc anyway.
My touring only has a fixed towing eye at the rear and a screw in one at the front and my Sport has the screw in ones front and back because of the Mtech kit.
James
'91 325i Sport
'93 318i touring 16v
-
Richy325iTouring
- E30 Zone Addict

- Posts: 3490
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Newport SouthWales
Post
Wed Dec 06, 2006 9:15 pm
the locator pin doubles as a pin for axle stands too
-
Speedtouch
- Old Skooler

- Posts: 14129
- Joined: Tue Feb 14, 2006 11:00 pm
- Location: Canterbury
Post
Wed Dec 06, 2006 9:27 pm
Hmm...my car has towing eyes already built into the car at both ends.
Perhaps someone could suggest a use for the screw-in one BMW thoughtfully/pointlessly provided...deluxe butt-plug maybe

-
Davenotouring
- Married to the E30 Zone

- Posts: 7962
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Cambridge
Post
Wed Dec 06, 2006 9:29 pm
It's for cars which had the threaded section in the bumper beams and not fitted towing eyes!


Nissan 200SX S14a - Track Slag
BMW 328i Cab - Daily Slag
-
Speedtouch
- Old Skooler

- Posts: 14129
- Joined: Tue Feb 14, 2006 11:00 pm
- Location: Canterbury
Post
Wed Dec 06, 2006 10:34 pm
I'm most upset to learn I've been carrying all that extra weight around all this time; I shall be writing a stiff letter to BMW HQ, claiming compensation for the fuel cost as a result of their misplaced generosity.

-
Jesus325iTouring
- Frog freak !

- Posts: 11356
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Omnipresent!
Post
Wed Dec 06, 2006 11:39 pm
Richy325iTouring wrote:the locator pin doubles as a pin for axle stands too
And possibly,a knuckle duster.

X5 V8 for thrills, CRV for chills, Range Rover P38 V8 for sooooo much aggravation...
-
Jesus325iTouring
- Frog freak !

- Posts: 11356
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Omnipresent!
Post
Wed Dec 06, 2006 11:40 pm
X5 V8 for thrills, CRV for chills, Range Rover P38 V8 for sooooo much aggravation...