Key fob failure

Need technical Q/A then you're in the right place

Moderator: martauto

evodan
E30 Zone Newbie
E30 Zone Newbie
Posts: 141
Joined: Sat Apr 09, 2005 11:00 pm
Location: Central Scotland

Post Wed Dec 06, 2006 3:04 pm

No red light on ma key fob and alarm will not activate also remote locking not working.
I have a spare key fob of the same type but from a different car can this key fob be linked to my alarm.
small single button type from a 93 tourer.
fuzzy
He who sleeps with "Gingers"
Posts: 14351
Joined: Sat Jun 04, 2005 11:00 pm
Location: melbourne Australia

Post Wed Dec 06, 2006 3:19 pm

wouldnt think the other fob would work,did you change the battery on the original fob?
evodan
E30 Zone Newbie
E30 Zone Newbie
Posts: 141
Joined: Sat Apr 09, 2005 11:00 pm
Location: Central Scotland

Post Wed Dec 06, 2006 3:46 pm

Yeh man new battery fitted
jcjdavis1
E30 Zone Camper
E30 Zone Camper
Posts: 1128
Joined: Thu Apr 13, 2006 11:00 pm
Location: Paisley Scotland

Post Wed Dec 06, 2006 6:08 pm

recently got new alarm fitted,since managed to zap fob in the microwave with my chips :o:


ps evodan always liked that video when it was in the charts winkeye winkeye
Image
evodan
E30 Zone Newbie
E30 Zone Newbie
Posts: 141
Joined: Sat Apr 09, 2005 11:00 pm
Location: Central Scotland

Post Wed Dec 06, 2006 10:51 pm

Looking back in some old threads seems I might be able to get the new fob coded to suit my alarm can anyone confirm this, how is this done, dealer only?
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Wed Dec 06, 2006 11:10 pm

evodan wrote:Looking back in some old threads seems I might be able to get the new fob coded to suit my alarm can anyone confirm this, how is this done, dealer only?
If you have an identical fob, and are handy with a soldering iron, then it may be possible.
If you look at the print side of the connections to the chip in the fob, you will see how it's coded. Some of the pins will have tracks cut or bridged across with solder.
You have to make the new fob match the old one.
wildeian
E30 Zone Regular
E30 Zone Regular
Posts: 851
Joined: Thu Mar 09, 2006 11:00 pm
Location: Colchester, Essex

Post Wed Dec 06, 2006 11:12 pm

A mate of mine took his e36 M3 to the dealer to get an 'extra' key-fob. They downloaded the code from his key and installed it on a new one, but in doing so f!&$£d up his original.

Dealer tried to charge him for the new key without giving him the old one back!! Then tried to charge him twice when it was explained that the intention was to have an 'extra' key.

To cut a long story short, there was some shouting at the dealer :hammer: (who still couldn't understand that asking for an extra key means you intend to leave with 2) followed by a phone call to head office.

In the end he left with 2 keys and paid nothing!!! :D
Speedtouch
Old Skooler
Old Skooler
Posts: 14129
Joined: Tue Feb 14, 2006 11:00 pm
Location: Canterbury

Post Wed Dec 06, 2006 11:13 pm

Could be worth changing the push switch on the original key fob - you could try bridging it with a piece of wire to see if it activates the c/locking...
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Wed Dec 06, 2006 11:14 pm

evodan wrote:No red light on ma key fob and alarm will not activate also remote locking not working.
I have a spare key fob of the same type but from a different car can this key fob be linked to my alarm.
small single button type from a 93 tourer.
Red light is usually just a simple circuit from the battery, through the push button, a resistor, the LED and back to the battery, so look very carefully at this area.
Try shorting across the little switch contacts if you can't see anything else wrong. If it's the switch, you should be able to find another suitable one from another old remote, or some other scrap electronics. These switches are very common, and there are only two or three types normally.
kam325itouring
E30 Zone Regular
E30 Zone Regular
Posts: 692
Joined: Sun Apr 02, 2006 11:00 pm
Location: london

Post Thu Dec 07, 2006 10:44 am

sounds like a dry joint in the fob try looking very closely on the solder joints....... if you can see any cracks?? then solder it, that should to the trick!!!!
evodan
E30 Zone Newbie
E30 Zone Newbie
Posts: 141
Joined: Sat Apr 09, 2005 11:00 pm
Location: Central Scotland

Post Thu Dec 14, 2006 2:25 pm

Thanks Guys got to the bottom of it by testing the LED circuit as Brianmoooore
sugested. Turned out to be the LED itself :o
Short term solution, I soldered the 2 LED terminals together and now works :D
Long term solution get a spare fob from the stealer.
User avatar
mikey-t
E30 Zone Regular
E30 Zone Regular
Posts: 444
Joined: Sun Aug 06, 2006 11:00 pm

Post Thu Dec 14, 2006 2:33 pm

we got a failsafe round these parts!!!!



Image
Image
march109
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6632
Joined: Sun Aug 20, 2006 11:00 pm
Location: Bournemouth

Post Thu Dec 14, 2006 2:52 pm

evodan wrote:Thanks Guys got to the bottom of it by testing the LED circuit as Brianmoooore
sugested. Turned out to be the LED itself :o
Short term solution, I soldered the 2 LED terminals together and now works :D
Long term solution get a spare fob from the stealer.
wuldn't it be cheaper/easier to replace the led!
325i Tech 1 Touring, breaking.

2.5 high comp. M20, 3.64 LSD, Fully undersealed, Spax springs & Bilstein shocks, s/s exhaust, Alpina rep wheels and more.