Which one??

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

User avatar
gtfacer
E30 Zone Newbie
E30 Zone Newbie
Posts: 9
Joined: Sun Dec 03, 2006 11:00 pm

Post Wed Dec 06, 2006 1:08 pm

Hi, I am new to the world of BMW and am looking to get a E30 325i.
I'm just wondering which i should go for? i.e. SE, Sport or just the i.
I'm intending to use it mostly for track days so my budget is very low (idealy under £500)
Any advice would be greatly appriciated :cool:
dazleeds
old skool raver
old skool raver
Posts: 12883
Joined: Fri Apr 01, 2005 11:00 pm
Location: Empire Building @

Post Wed Dec 06, 2006 1:13 pm

on your budget and for a track slaaaag
get a 325i and strip it out

no point spending a fortune getting a sport for track use imo

engines are all same anyway although early cars had better compression and are a little better at making the claimed power
www.oldskoolfantasy.co.uk
in the shit,the one to blame,yeh its all my fault ;)
User avatar
orangecurry
E30 Zone Addict
E30 Zone Addict
Posts: 2518
Joined: Mon Apr 11, 2005 11:00 pm
Location: West Sussex

Post Wed Dec 06, 2006 1:16 pm

hi and welcome :D

the engines are the same, the gearbox is 'better' in a sport (closer ratios) for accelerating, and it has an LSD (probably) but you'll be paying over the odds for a Sport.
SE just means special equiptment - interior usually - so no advantage there.

Just get the standard car; any example under 500 will have tired suspension anyway, so get new shocks and springs to suit your driving/track.

If you can find one with an LSD that would be a bonus - good luck
Theo
Old Skooler
Old Skooler
Posts: 10735
Joined: Wed Jun 01, 2005 11:00 pm
Location: Kent

Post Wed Dec 06, 2006 1:16 pm

Under £500? I got a 325i sport with all the bits for £400, but it would have fallen to pieces if it was on a track, massive rust holes every where, complete deathtrap.

You will want to spend alot more than £500 once you have the car on suspension, tyres and justy generally getting the car up to scratch. Its possible to get a half decent 325i for £500, although they seem to be getting harder to find. I think realistically you need to budget alot more to be honest.
jcjdavis1
E30 Zone Camper
E30 Zone Camper
Posts: 1128
Joined: Thu Apr 13, 2006 11:00 pm
Location: Paisley Scotland

Post Wed Dec 06, 2006 5:59 pm

welcome :thumb:
Image
User avatar
gtfacer
E30 Zone Newbie
E30 Zone Newbie
Posts: 9
Joined: Sun Dec 03, 2006 11:00 pm

Post Thu Dec 07, 2006 10:29 am

Thanks for the advice guys.
Theo325, i was intending uprating the suspension, wheels and tyres anyway, that's why i want to spend as little as possible on the intitial purchase of the car.
Just after a track slag really so will tryin to find a tatty 325i and strip it out.
How easy are the lsd diffs to get hold of? As i intend to do a bit of drifting i think it will be quite important. Or would i be better just welding it up?

What model is yours dazleeds? I like it! Looks like the sorrta thing I'm after :)
MadE30mike
E30 Zone Regular
E30 Zone Regular
Posts: 668
Joined: Mon Jul 17, 2006 11:00 pm
Location: FIFE(Scotland)

Post Thu Dec 07, 2006 10:40 am

If its for track/drift use and not for the road, buy a tacky 316/318 ,slam it n drop a 2.5/3.5 in it for next to nuthing then add some lsd to get you tripin !
Image
User avatar
gtfacer
E30 Zone Newbie
E30 Zone Newbie
Posts: 9
Joined: Sun Dec 03, 2006 11:00 pm

Post Thu Dec 07, 2006 12:26 pm

MadE30mike wrote:If its for track/drift use and not for the road, buy a tacky 316/318 ,slam it n drop a 2.5/3.5 in it for next to nuthing then add some lsd to get you tripin !
I had though about that, but decided it might be to much work. I presume you have to change the looms etc? How bigger job is it?
How much am i looking at for a 2.5 or a 3.5 box engine and loom?
Cheers

Ben
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Thu Dec 07, 2006 11:53 pm

2.5 M20 engine, gearbox and prop just drops straight into a 316 or 318 shell. Engine wiring loom stays on the 2.5 engine and goes in with it. Completely seperate from the body looms. Just two wires to connect at the battery, and a 20 pin plug to plug in.
3.5 M30 engine is a bit more involved, but it's been done many times and all the info is in the archives.