cam timing

Need technical Q/A then you're in the right place

Moderator: martauto

daveo
E30 Zone Newbie
E30 Zone Newbie
Posts: 60
Joined: Sun Dec 11, 2005 11:00 pm
Location: Chester ,Cheshire

Post Tue Dec 05, 2006 1:39 pm

ive just fitted a 288/288 cam can any one explane to me how to setup a adjustable cam pulley thanks dave
User avatar
reggid
E30 Zone Squatter
E30 Zone Squatter
Posts: 1984
Joined: Mon Jul 11, 2005 11:00 pm
Location: Oz

Post Wed Dec 06, 2006 1:29 am

fit it as per normal gear and belt and if needed loosen the nuts and rotate cam hub relative centre portion so that the timing marks on top end and bottom end are both aligned if they are out.

There will be little no adjustment to make unless you have taken alot from the head or block.
Demlotcrew
E30 Zone Team Member
E30 Zone Team Member
Posts: 13329
Joined: Mon Dec 20, 2004 11:00 pm
Location: East Anglia

Post Wed Dec 06, 2006 9:35 am

Its not that simple,

You need to work out the TDC then time in the BTD which would have been on the instructions with your cam.

Andrew
User avatar
reggid
E30 Zone Squatter
E30 Zone Squatter
Posts: 1984
Joined: Mon Jul 11, 2005 11:00 pm
Location: Oz

Post Wed Dec 06, 2006 10:13 am