Hi guys
Can someone remind me is it 1st click or 2nd for removing an e30 ignition barrell and how long does the wire need to be to poke down the side?
Cheers Spadge...
removing ignition barrell
Moderator: martauto
-
SPADGE
- Married to the E30 Zone

- Posts: 7373
- Joined: Wed Aug 09, 2006 11:00 pm
- Location: Milton Keynes, Bucks
-
Chris-W
- E30 Zone Team Member

- Posts: 7219
- Joined: Tue May 24, 2005 11:00 pm
- Location: South Cheshire
-
SPADGE
- Married to the E30 Zone

- Posts: 7373
- Joined: Wed Aug 09, 2006 11:00 pm
- Location: Milton Keynes, Bucks
Cheers Chris!Chris-W wrote:1st click, and aboutt 1.75cm.
Tried yesterday using a very small rivet but i suspect it was too short as the thing wouldn't budge
So i just put it to the 1st click then insert the wire and pull yes?
-
Pal318is
- E30 Zone Addict

- Posts: 3494
- Joined: Fri Jan 14, 2005 11:00 pm
- Location: Kop End - Bedford
I stuck a 2"ish long thin nail, down the small hole. the type you use to hang pic's up with. then just pull the mother out!!
Pal
Pal
Pal
[img]http://
M42's Run in the Family...The kids sayin 'YNWA'
[img]http://
M42's Run in the Family...The kids sayin 'YNWA'
-
oze30
- E30 Zone Addict

- Posts: 4133
- Joined: Mon Oct 24, 2005 11:00 pm
- Location: Sydney
mate, use the thing I used for the otehr one.. its on your shelf boxes, curved u shaped thing. (FGrom an iold security tag)
-
Ant
- Retired Team Member

- Posts: 10496
- Joined: Tue Dec 21, 2004 11:00 pm
- Location: PD+E dept :D
Product Development and Endurance for Delphi.
Original performance chips, original works not unlicensed copies
Email FTW
Original performance chips, original works not unlicensed copies
-
chief
- E30 Zone Regular

- Posts: 324
- Joined: Sun Mar 13, 2005 11:00 pm
- Location: farnham , surrey
just did mine today.
key in position 1
slip a thin nail down the little hole
a little wiggle and she's out
theres a little square lock 1/2 way down the barrel which retreats when the nail is in the hole.
HTH
key in position 1
slip a thin nail down the little hole
a little wiggle and she's out
theres a little square lock 1/2 way down the barrel which retreats when the nail is in the hole.
HTH
Don't you wish there were a knob on the TV to turn up the intelligence? There's one marked 'Brightness', but it doesn't work.
-
SPADGE
- Married to the E30 Zone

- Posts: 7373
- Joined: Wed Aug 09, 2006 11:00 pm
- Location: Milton Keynes, Bucks
When your in a rush Ant there isn't always time to faff around doing searches. Especialy if you don't know if your going to find what you are looking for at the end of it! Not sure why the sarcastic smiley was needed but whatever floats your boat
Cheers for the info guys its out now
-
Ant
- Retired Team Member

- Posts: 10496
- Joined: Tue Dec 21, 2004 11:00 pm
- Location: PD+E dept :D
Glad I bothered....... your attitude stinks dude.When your in a rush Ant there isn't always time to faff around doing searches. Especialy if you don't know if your going to find what you are looking for at the end of it! Not sure why the sarcastic smiley was needed but whatever floats your boat
Product Development and Endurance for Delphi.
Original performance chips, original works not unlicensed copies
Email FTW
Original performance chips, original works not unlicensed copies
-
SPADGE
- Married to the E30 Zone

- Posts: 7373
- Joined: Wed Aug 09, 2006 11:00 pm
- Location: Milton Keynes, Bucks
My attitude?????????Ant wrote:Glad I bothered....... your attitude stinks dude.When your in a rush Ant there isn't always time to faff around doing searches. Especialy if you don't know if your going to find what you are looking for at the end of it! Not sure why the sarcastic smiley was needed but whatever floats your boat
I asked a simple question and your replied with a link and a sarcastic smiley! Unless that smiley means something different on here??
-
320Touring
- E30 Zone Team Member

- Posts: 12316
- Joined: Fri Feb 11, 2005 11:00 pm
- Location: Glasgow (Scotland)
ooooookay!
Spadge, I know ant quite well, dealt with him a lot and he's helped me with a multitude of things.
this is a text based forum, and things can often be misconstrued. Ant has a point- the link he shows didnt require "searching" anymore than 3 or 4 clicks on the articles section. probably less effort and faster than posting up your original response.
The zoners provided the info you needed, and the lock is out. mission accomplished
no need for animosity, and TBH its not worth it. Ant is a respected member of this forum, a long time zoner and someone who is NEVER spoken about in a negative manner.
If he really thought you should search for it, he'd have said..."do a search"
you'd do well to give as freely of your knowlege as ant does.
I personally dont want to see you annoyed- I think you've contibuted some ace threads here- notably the YB transit
and you certainly dont seem to be scared of ripping up m30's and stuffing them into e30's
just try not to take things to heart dude, and enjoy the zone
Neil (320touring)
Spadge, I know ant quite well, dealt with him a lot and he's helped me with a multitude of things.
this is a text based forum, and things can often be misconstrued. Ant has a point- the link he shows didnt require "searching" anymore than 3 or 4 clicks on the articles section. probably less effort and faster than posting up your original response.
The zoners provided the info you needed, and the lock is out. mission accomplished
no need for animosity, and TBH its not worth it. Ant is a respected member of this forum, a long time zoner and someone who is NEVER spoken about in a negative manner.
If he really thought you should search for it, he'd have said..."do a search"
you'd do well to give as freely of your knowlege as ant does.
I personally dont want to see you annoyed- I think you've contibuted some ace threads here- notably the YB transit
just try not to take things to heart dude, and enjoy the zone
Neil (320touring)
The big Unit Parts Clear out Make me an offer on parts!
http://www.e30zone.net/modules.php?name ... 81#2766881
http://www.e30zone.net/modules.php?name ... 81#2766881
-
SPADGE
- Married to the E30 Zone

- Posts: 7373
- Joined: Wed Aug 09, 2006 11:00 pm
- Location: Milton Keynes, Bucks
320Touring wrote:ooooookay!
Spadge, I know ant quite well, dealt with him a lot and he's helped me with a multitude of things.
this is a text based forum, and things can often be misconstrued. Ant has a point- the link he shows didnt require "searching" anymore than 3 or 4 clicks on the articles section. probably less effort and faster than posting up your original response.
The zoners provided the info you needed, and the lock is out. mission accomplished![]()
no need for animosity, and TBH its not worth it. Ant is a respected member of this forum, a long time zoner and someone who is NEVER spoken about in a negative manner.
If he really thought you should search for it, he'd have said..."do a search"
you'd do well to give as freely of your knowlege as ant does.
I personally dont want to see you annoyed- I think you've contibuted some ace threads here- notably the YB transitand you certainly dont seem to be scared of ripping up m30's and stuffing them into e30's
![]()
just try not to take things to heart dude, and enjoy the zone![]()
Neil (320touring)
Why thank you that is most respectful and decent way anyone except Brian Moore has spoken to me from 'staff' since day one!
It would seem a few people have the wrong end of the stick with me and a few of their 'friends' have followed like trusty little sheep however
I have never been a 'possom' and at 41 its a bit late for change so i will and have always spoken my mind and call a spade a spade!
I come on here to enjoy spending some down time and to feed my 'petrol head' with new ideas but i really don't need the snide/clicky politics that seem to come with most forums
The biggest problem with the written word is getting 'feelings' to go along with it and in fact the opposite of what you mean often comes across.
Glad you enjoyed the pics of the Cossie stuff and should you ever need a 'fix' i have plenty more where they came from
Here's a little taster




WHOOPS


