MTEC2 kit/ Front bumper removal

Need technical Q/A then you're in the right place

Moderator: martauto

wildeian
E30 Zone Regular
E30 Zone Regular
Posts: 851
Joined: Thu Mar 09, 2006 11:00 pm
Location: Colchester, Essex

Post Mon Dec 04, 2006 4:51 pm

Will the kit that covers the front bumper come off, or do I need to take the bumper off. (and how!!)

Cheers :D
wildeian
E30 Zone Regular
E30 Zone Regular
Posts: 851
Joined: Thu Mar 09, 2006 11:00 pm
Location: Colchester, Essex

Post Mon Dec 04, 2006 10:28 pm

:roll:
WillG
E30 Zone Regular
E30 Zone Regular
Posts: 433
Joined: Wed Mar 29, 2006 11:00 pm
Location: Cheltenham

Post Mon Dec 04, 2006 11:18 pm

for plastic valance there are plastic rivets along bottom going into metal valance then there are 6 or 7 white push in clips along top, so just get the plastic rivets out of bottom then go round to each side and pull outwards and then work your way along the front pulling it off the clips, pretty sure thats how its done but might have missed something, check real oem just inace there maybe a metal clip with thread on that has a platic nut screwed on it on each side aswell
wildeian
E30 Zone Regular
E30 Zone Regular
Posts: 851
Joined: Thu Mar 09, 2006 11:00 pm
Location: Colchester, Essex

Post Mon Dec 04, 2006 11:23 pm

Yeah, thats the bit I've got off. Don't want to pull the other bit in the wrong place, incase it breaks!! :(

Need to get the bumper bit off (with indicators in it)
User avatar
k
E30 Zone Newbie
E30 Zone Newbie
Posts: 103
Joined: Sun Sep 17, 2006 11:00 pm
Location: cumbria

Post Tue Dec 05, 2006 2:59 pm

Hi Ian, leather gear going in this weekend,weather permitting.....ref your query, I asked the same question 18th sept, reply from tomson with a diagram was spot on, the plastic type fixings under the lower lip are soon levered out with a small screwdriver and all break. Replacements from Bmw £1 for 8.
The 2 nuts at the end of the spoiler (just in front of wheels) are usually solid and need a dose of release oil and soak etc., I did shear one mine from the captive plastic which is part of bumper, but once off you can clean the area up and Aradite etc the bolt back in position.
You will have it off in no time, the clips between bumper and spoiler are also replacable if any are broken.
Really tidies the front end up once it's all replaced, no gaping gaps.
wildeian
E30 Zone Regular
E30 Zone Regular
Posts: 851
Joined: Thu Mar 09, 2006 11:00 pm
Location: Colchester, Essex

Post Tue Dec 05, 2006 4:27 pm

Cheers Malcolm, thats a job for tomorrow afternoon!!
wildeian
E30 Zone Regular
E30 Zone Regular
Posts: 851
Joined: Thu Mar 09, 2006 11:00 pm
Location: Colchester, Essex

Post Wed Dec 06, 2006 6:33 am

I still need to get the bumper section off, I'm guessing it's undo the 2 hex-capped bolts under the bumper, and the whole lot comes away?

Anyone?? :roll:
User avatar
ROC
E30 Zone Regular
E30 Zone Regular
Posts: 615
Joined: Mon Aug 29, 2005 11:00 pm
Location: Northants

Post Wed Dec 06, 2006 1:28 pm

Yep, as you say take the two bolts out. Then pull the bumper forward, unplug the indicators, job done.
wildeian
E30 Zone Regular
E30 Zone Regular
Posts: 851
Joined: Thu Mar 09, 2006 11:00 pm
Location: Colchester, Essex

Post Wed Dec 06, 2006 6:06 pm

Bugger!! one is rounded!! :x :cry: :x
march109
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6632
Joined: Sun Aug 20, 2006 11:00 pm
Location: Bournemouth

Post Thu Dec 07, 2006 3:42 pm

k wrote:Hi Ian, leather gear going in this weekend,weather permitting.....ref your query, I asked the same question 18th sept, reply from tomson with a diagram was spot on, the plastic type fixings under the lower lip are soon levered out with a small screwdriver and all break. Replacements from Bmw £1 for 8.
The 2 nuts at the end of the spoiler (just in front of wheels) are usually solid and need a dose of release oil and soak etc., I did shear one mine from the captive plastic which is part of bumper, but once off you can clean the area up and Aradite etc the bolt back in position.
You will have it off in no time, the clips between bumper and spoiler are also replacable if any are broken.
Really tidies the front end up once it's all replaced, no gaping gaps.
Any one know part numbers for them? my bmw parts desk doesnt have a clue and real oem tells me theres no such part!
325i Tech 1 Touring, breaking.

2.5 high comp. M20, 3.64 LSD, Fully undersealed, Spax springs & Bilstein shocks, s/s exhaust, Alpina rep wheels and more.
User avatar
k
E30 Zone Newbie
E30 Zone Newbie
Posts: 103
Joined: Sun Sep 17, 2006 11:00 pm
Location: cumbria

Post Fri Dec 08, 2006 8:03 am

I posted a query 18th sept ref these bits and tomson replied next day with a diagram from the BMW dealer which clearly showed the plastic bits that hold the bottom edge of the spoiler in position. The local agent soon found them and did actually have them in stock.
Have a look at the thead.
If you don't have any joy send a pm and I'll pop in and get the number.
gcorky
Boost Junkie
Posts: 2009
Joined: Tue Jul 12, 2005 11:00 pm
Location: n.e england

Post Fri Dec 08, 2006 9:10 am

if you mean the u brackets looks as though theyre not available on there own,part of valance :cry:
Image

525 sport