Questionaire/Survey E30 M20 Head Problems/Performance

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

buckz2001
E30 Zone Newbie
E30 Zone Newbie
Posts: 24
Joined: Mon Oct 17, 2005 11:00 pm

Post Sun Dec 03, 2006 3:34 pm

MOTORSPORT STUDENT MAJOR PROJECT E30 325 M20 CYLINDER HEAD

Questionaire/Survey:

1:Can you please inform me the mileage when yours or a friends 325's had Cylinder Head problems?

2:Problem incountered?Reasons why:

3:Do you feel the standard M20 325 E30 power/performance requires improving to match todays hot hatches?

4:Do you feel porting/polishing the head could help stop overheating problems that lead to cracks etc? Please give reasons:

Thanks for your time filling in this questionaire.


Questionaire/Survey E30 M20 Head Problems/Performance
zaust
Zone day release
Posts: 13007
Joined: Sun Jan 09, 2005 11:00 pm
Location: Somewhere in Hertfordshire , or press Ctrl + W

Post Sun Dec 03, 2006 4:05 pm

150k cracked water jacket

fuel delivery system can be revised.
as for porting and polishing, no can only make it more prone to problems.
M30 Tech 1 Touring on gas.
Image
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Sun Dec 03, 2006 4:06 pm

How many threads do you want! :?
Theo
Old Skooler
Old Skooler
Posts: 10735
Joined: Wed Jun 01, 2005 11:00 pm
Location: Kent

Post Sun Dec 03, 2006 4:12 pm

Is the 885 head really that bad? I've had 4 325's 75k, 198k, 175k and 125k - none of them have had head problems... Never experienced any temperature problems either, even when giving the car hell round round the Ring the temp needle didn't go above 1/2 way.
User avatar
pnd
E30 Zone Squatter
E30 Zone Squatter
Posts: 1801
Joined: Sat Nov 12, 2005 11:00 pm

Post Sun Dec 03, 2006 5:08 pm

heads tend to go between 100-150k in my experience the earlier cars seem to be less prone to this but not immune Theo you have been lucky Ive had several go. on the last one the temp didnt rise just used coolant and this eventually started mixing with the oil. as for performance these engines are not easy to iomprove a six branch and chip is all you can easily do. I am not a fan of cams cos you lose bottom end torque and they are detrimental to smooth running at idle.
oguz327
Captain Armco
Captain Armco
Posts: 4174
Joined: Tue Oct 25, 2005 11:00 pm
Location: Hampshire

Post Sun Dec 03, 2006 5:58 pm

137,000 miles on mine and owned for the last 3.5 years and so far no problems even after a ring trip and several other track days. Like all engines regular servicing and coolant changes should keep things sweet.

Had two m20 e30s and they have both been fine however i did cook an e21 320 head once but these were notorious for overheating.
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Sun Dec 03, 2006 10:45 pm

Probably most 325 heads never crack, but a good proportion do.
IIRC, one theory for the cracking is the large cast iron exhaust manifold bolted up to it, and fitting a six branch can alleviate this.
Andyboy
Alpina Colada
Posts: 12577
Joined: Mon Sep 11, 2006 11:00 pm
Location: Notts

Post Sun Dec 03, 2006 11:23 pm

Most of mine were perfectly okay. A couple mixed oil and water and a couple used to run hot, probably due to head gasket/water jacket corrosion issues. A huge proportion on E21 and E12's needed new heads early on.
Last edited by Andyboy on Mon Dec 04, 2006 4:46 pm, edited 1 time in total.
buckz2001
E30 Zone Newbie
E30 Zone Newbie
Posts: 24
Joined: Mon Oct 17, 2005 11:00 pm

Post Mon Dec 04, 2006 4:29 pm

thanks for the advice guys.....the manifold weight theory is interesting!
cheers
320Touring
E30 Zone Team Member
E30 Zone Team Member
Posts: 12316
Joined: Fri Feb 11, 2005 11:00 pm
Location: Glasgow (Scotland)

Post Mon Dec 04, 2006 4:35 pm

Andy, you deviant- so many 520i's 8O

my 320i is on original head, standard manifold, 104k and no problems- coolant changed every 12 months :cool:
The big Unit Parts Clear out Make me an offer on parts!
http://www.e30zone.net/modules.php?name ... 81#2766881
Andyboy
Alpina Colada
Posts: 12577
Joined: Mon Sep 11, 2006 11:00 pm
Location: Notts

Post Mon Dec 04, 2006 4:45 pm

320Touring wrote:Andy, you deviant- so many 520i's 8O
In know. You haven't lived until you've experienced the raw power of a 12v M20 520i E34 Automatic. They're so slow they're dangerous - the first time I drove one I thought the handbrake was on. :D
320Touring
E30 Zone Team Member
E30 Zone Team Member
Posts: 12316
Joined: Fri Feb 11, 2005 11:00 pm
Location: Glasgow (Scotland)

Post Mon Dec 04, 2006 4:46 pm

Andyboy wrote:
320Touring wrote:Andy, you deviant- so many 520i's 8O
In know. You haven't lived until you've experienced the raw power of a 12v M20 520i E34 Automatic. They're so slow they're dangerous - the first time I drove one I thought the handbrake was on. :D
I can imagine :roll:

drink like ollie ried on a bender too, no doubt :D
The big Unit Parts Clear out Make me an offer on parts!
http://www.e30zone.net/modules.php?name ... 81#2766881
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Mon Dec 04, 2006 9:39 pm

buckz2001 wrote:thanks for the advice guys.....the manifold weight theory is interesting!
cheers
Nothing to do with the weight. It's the amount of heat it feeds back into one side of the head that's supposed to be the problem.
Andyboy
Alpina Colada
Posts: 12577
Joined: Mon Sep 11, 2006 11:00 pm
Location: Notts

Post Mon Dec 04, 2006 10:40 pm

I think it's more like an inconsistency with head castings. Recently I saw a 1981 320 with it's original head and they were the ones most prone to cracking. I have a feeling E12's and E21's had a two piece (old M30 style) manifold which would have some more flex. The old metal bumper 325i's were buggers for cracking manifolds too. I've seen 325i's with @100k and full history that have cracked heads so there really is no rhyme or reason for it. Possibly a variation in alloy quality? It's odd how some heads corrode badly and others don't.

Either way - start squirrelling away those M20 heads now! :D
User avatar
reggid
E30 Zone Squatter
E30 Zone Squatter
Posts: 1984
Joined: Mon Jul 11, 2005 11:00 pm
Location: Oz

Post Tue Dec 05, 2006 1:27 am

head cracking mostly comes from not bleeding the coolant creating air bubbles the cause increased cyclic heating and cooling which is what fatigue cracks need to initiate and then grow. Every time you top up coolant use genuine stuff and bleed it and you'll minimise the liklihood of cracks. Also keep the entire cooling system in good order and flushed regularily.

If statistical analsis was ever done IMO the climate would play a part if its cold the temp range becomes higher and the head will cool faster which can cause thermal shock in rare cases which may start the initiation process.

If the 6 branch alleviated cracking then i wouldn't have a cracked original german delivered Alpina head
miniblob
E30 Zone Addict
E30 Zone Addict
Posts: 3153
Joined: Thu Jan 05, 2006 11:00 pm
Location: Croydon/Uckfield

Post Tue Dec 05, 2006 2:20 am

Ha ha, my head went after i had my 6 branch fitted - no idea if it's actually cracked or what though 'cos it's still in use at the mo - just very creamy!!!!! To answer your survey, i think it was on about 112k or 113k when it started using water - now it's nearer 120k and using sh*tloads of water - and plenty of oil!!
327 Touring with bass!!!

>>> WWW.DNRVINYL.CO.UK >>> UK GARAGE SPECIALIST >>>
>>> WWW.DNRVINYL.COM >>> FREE MIX DOWNLOADS!!! >>>
Andyboy
Alpina Colada
Posts: 12577
Joined: Mon Sep 11, 2006 11:00 pm
Location: Notts

Post Tue Dec 05, 2006 9:23 am

Would a 6 branch manifold absorb/dissipate anywhere near as much heat from the head though? Just a question. The thing about air locks doesn't really stand up because cars which have been running fine on proper anti freeze do it. There are two cracks to consider - the normal one where it cracks under the cam (oil and water mixing) and the other one from an exhaust port into a waterway. Buckz should get an old M20 head and saw it in half to see the cross section of the head. I did once - I'll go and find the pic.
e30_Turbo
Boost Junkie
Posts: 3158
Joined: Mon Jan 10, 2005 11:00 pm
Location: East Anglia

Post Tue Dec 05, 2006 9:31 am

163k on original head before a stuck stat caused overheating resulting in cracked and warped head, engineer said it was proper fooked and he was astonished at the level of damage and it still ran!

Crack was on number 5 if that helps.

HTH, Mark.
Image
Andyboy
Alpina Colada
Posts: 12577
Joined: Mon Sep 11, 2006 11:00 pm
Location: Notts

Post Tue Dec 05, 2006 9:34 am

Here's a 325i head sawn in two;
Image
User avatar
reggid
E30 Zone Squatter
E30 Zone Squatter
Posts: 1984
Joined: Mon Jul 11, 2005 11:00 pm
Location: Oz

Post Tue Dec 05, 2006 12:06 pm

Andyboy wrote:The thing about air locks doesn't really stand up because cars which have been running fine on proper anti freeze do it.
whats antifreeze got to do with preventing air bubbles?
Speedtouch
Old Skooler
Old Skooler
Posts: 14129
Joined: Tue Feb 14, 2006 11:00 pm
Location: Canterbury

Post Tue Dec 05, 2006 12:32 pm

Anyone ever tried this stuff instead of head replacement? http://www.steelseal.com/eng/home.html

Sounds like a nice lazy way to fix them... 8)
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
Andyboy
Alpina Colada
Posts: 12577
Joined: Mon Sep 11, 2006 11:00 pm
Location: Notts

Post Tue Dec 05, 2006 3:37 pm

reggid wrote:
Andyboy wrote:The thing about air locks doesn't really stand up because cars which have been running fine on proper anti freeze do it.
whats antifreeze got to do with preventing air bubbles?
What air bubbles? The only reason for there to be air bubbles in a cooling system is a faulty head or head gasket! You'll also find antifreeze has vastly less surface tension than straight water so it moves around much easier - or so Glycol say.
Andyboy
Alpina Colada
Posts: 12577
Joined: Mon Sep 11, 2006 11:00 pm
Location: Notts

Post Tue Dec 05, 2006 3:39 pm

320iSE wrote:Anyone ever tried this stuff instead of head replacement? http://www.steelseal.com/eng/home.html

Sounds like a nice lazy way to fix them... 8)
That looks good! The other stuff is Seal-it, a satchet of alloy flakes you tip into the cooling system. Not as good as piston cement though. How to make a completely shagged Nikasil engine run again - well, long enough to sell the bastard!
User avatar
reggid
E30 Zone Squatter
E30 Zone Squatter
Posts: 1984
Joined: Mon Jul 11, 2005 11:00 pm
Location: Oz

Post Wed Dec 06, 2006 1:23 am

Andyboy wrote:
reggid wrote:
Andyboy wrote:The thing about air locks doesn't really stand up because cars which have been running fine on proper anti freeze do it.
whats antifreeze got to do with preventing air bubbles?
What air bubbles? The only reason for there to be air bubbles in a cooling system is a faulty head or head gasket! You'll also find antifreeze has vastly less surface tension than straight water so it moves around much easier - or so Glycol say.
why is there a bleeder valve then?
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Wed Dec 06, 2006 8:58 am

reggid wrote:
why is there a bleeder valve then?
To fill it from empty.
User avatar
reggid
E30 Zone Squatter
E30 Zone Squatter
Posts: 1984
Joined: Mon Jul 11, 2005 11:00 pm
Location: Oz

Post Wed Dec 06, 2006 9:58 am

Brianmoooore wrote:
reggid wrote:
why is there a bleeder valve then?
To fill it from empty.
but what does it actually do
Andyboy
Alpina Colada
Posts: 12577
Joined: Mon Sep 11, 2006 11:00 pm
Location: Notts

Post Wed Dec 06, 2006 12:48 pm

It's not a bleed valve. It doesn't open and close. It's a bleed SCREW. You use it to let airlocks out when you fill or refill a cooling system after it has been drained.
User avatar
reggid
E30 Zone Squatter
E30 Zone Squatter
Posts: 1984
Joined: Mon Jul 11, 2005 11:00 pm
Location: Oz

Post Thu Dec 07, 2006 12:00 am

Andyboy wrote:It's not a bleed valve. It doesn't open and close. It's a bleed SCREW. You use it to let airlocks out when you fill or refill a cooling system after it has been drained.

definition of a valve "any device for halting or controlling the flow of a liquid, gas, or other material through a passage, pipe, inlet, outlet, etc"

so it is actually a valve that works by a screw mechanism and it does open and close (but not automtically) otherwise you couldn't be bleeding anything.

Why do you want to get airlocks out given that the definition of an airlock is

"A bubble or pocket of air or vapor, as in a pipe, that stops the normal flow of fluid through the conducting part"?
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Thu Dec 07, 2006 12:25 am

reggid wrote: Why do you want to get airlocks out given that the definition of an airlock is
"A bubble or pocket of air or vapor, as in a pipe, that stops the normal flow of fluid through the conducting part"?
Self explanatory, I should have thought!
User avatar
reggid
E30 Zone Squatter
E30 Zone Squatter
Posts: 1984
Joined: Mon Jul 11, 2005 11:00 pm
Location: Oz

Post Thu Dec 07, 2006 7:10 am

Brianmoooore wrote:
reggid wrote: Why do you want to get airlocks out given that the definition of an airlock is
"A bubble or pocket of air or vapor, as in a pipe, that stops the normal flow of fluid through the conducting part"?
Self explanatory, I should have thought!
i actually know what its for its just some others have said

" The only reason for there to be air bubbles in a cooling system is a faulty head or head gasket! "

which is not true and if there is a air lock then it can affect the cooling system and hence cooling of the head which must have some effect on the heads life.

All i know is that all the BMW specialist engine builders around here have said to me that bleeding the system after replacing fluids or top ups is critical for this reason
Andyboy
Alpina Colada
Posts: 12577
Joined: Mon Sep 11, 2006 11:00 pm
Location: Notts

Post Thu Dec 07, 2006 9:24 pm

Jesus, it really is 'spot the brain cell' today isn't it!! winkeye

"" The only reason for there to be air bubbles in a cooling system is a faulty head or head gasket! "

which is not true"

:cry: :cry: :cry:

So please DO tell O Wise Maestro why this is not so? Where do all the air bubbles in a pressurised cooling system come from? I'm sure we'd all love to know........... winkeye
User avatar
reggid
E30 Zone Squatter
E30 Zone Squatter
Posts: 1984
Joined: Mon Jul 11, 2005 11:00 pm
Location: Oz

Post Thu Dec 07, 2006 11:20 pm

they come from when you fill the coolant up from empty or near empty. If there are no bubbles and the system is properly pressurised then yes a fault with the head gasket or head will cause airlocks but these are not the "only" reason for there to be airlock during the cars life.
Last edited by reggid on Thu Dec 07, 2006 11:48 pm, edited 1 time in total.
WillG
E30 Zone Regular
E30 Zone Regular
Posts: 433
Joined: Wed Mar 29, 2006 11:00 pm
Location: Cheltenham

Post Thu Dec 07, 2006 11:42 pm

isnt it a problem cos people think its full when they fill it up put cap on and drive it and air has come out they are low on collant and overheat, when i change collant i normaly fill it up leave cap off and start it from cold and keep filling it up as it goes down till it stops, put cap on and drive till its close to running temperature, turn it off and then let it cool back down and check level. Done this on everything i worked on and never had problems. So is it really possible to get an airlock and it stay there forever until you bleed it?
Andyboy
Alpina Colada
Posts: 12577
Joined: Mon Sep 11, 2006 11:00 pm
Location: Notts

Post Thu Dec 07, 2006 11:42 pm

Andyboy wrote: You use it to let airlocks out when you fill or refill a cooling system after it has been drained.
What Reggid, you mean like this? :D

Airlocks and air pockets don't occur in a healthy engine. That's why the header tank is above the cylinder head.
User avatar
reggid
E30 Zone Squatter
E30 Zone Squatter
Posts: 1984
Joined: Mon Jul 11, 2005 11:00 pm
Location: Oz

Post Thu Dec 07, 2006 11:55 pm

Andyboy wrote:
Andyboy wrote: You use it to let airlocks out when you fill or refill a cooling system after it has been drained.
What Reggid, you mean like this? :D

Airlocks and air pockets don't occur in a healthy engine. That's why the header tank is above the cylinder head.
show me an m20 engine thats healthy..........lol