M-tech suspension

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
blingsta
Boost Junkie
Posts: 2930
Joined: Fri Jan 27, 2006 11:00 pm
Location: Enfield

Post Sun Dec 03, 2006 9:18 pm

I want to try and clear this up with someone that may have better knowledge... am i correct in thinking that M-tech suspensions (shocks) are thicker than the standard 325i ones? are there any markings or numbers on them to show what they are?
kam-325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 4851
Joined: Tue Sep 27, 2005 11:00 pm
Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!

Post Sun Dec 03, 2006 9:20 pm

The shocks are the same diameter (thickness), they will have a part number on them.
Pete don't care about colour, He would shag a rainbow if he could find the end of it....
Image
User avatar
blingsta
Boost Junkie
Posts: 2930
Joined: Fri Jan 27, 2006 11:00 pm
Location: Enfield

Post Sun Dec 03, 2006 9:24 pm

but ive seen some shocks that are thicker than my ones and thought that they are m-tech? is that not the case then? what are the thick ones :?:
gcorky
Boost Junkie
Posts: 2009
Joined: Tue Jul 12, 2005 11:00 pm
Location: n.e england

Post Sun Dec 03, 2006 9:25 pm

31301133438 part no for boge gas front inserts.
51mm dia .

this is original sport spec.
Image

525 sport
User avatar
blingsta
Boost Junkie
Posts: 2930
Joined: Fri Jan 27, 2006 11:00 pm
Location: Enfield

Post Sun Dec 03, 2006 9:26 pm

thanx for that, will i be able to see this number if im looking at a complete strut?
User avatar
gazza
E30 Zone Camper
E30 Zone Camper
Posts: 1266
Joined: Tue Feb 08, 2005 11:00 pm
Location: north london/herts

Post Sun Dec 03, 2006 9:28 pm

i was trying to sus this out i have some genuine m tech shocks from a saloon but they are much thinner than the ones on my cabby as i was going to use them on it
SCOTT325SE
Married to the E30 Zone
Married to the E30 Zone
Posts: 12582
Joined: Sun Jan 09, 2005 11:00 pm
Location: Carmarthen (West Wales)

Post Sun Dec 03, 2006 9:29 pm

no you wont.

i have a set of complete 325 51mm front struts that i am taking off a car i am breaking at the moment. they will be coming off next weekend probably. would you be interested in them?
User avatar
blingsta
Boost Junkie
Posts: 2930
Joined: Fri Jan 27, 2006 11:00 pm
Location: Enfield

Post Sun Dec 03, 2006 9:30 pm

so what are the ones on your cabby then?? this is where im confused. :? .. can m-tech shox be thin ones :?:
User avatar
blingsta
Boost Junkie
Posts: 2930
Joined: Fri Jan 27, 2006 11:00 pm
Location: Enfield

Post Sun Dec 03, 2006 9:32 pm

SCOTT325SE wrote:no you wont.

i have a set of complete 325 51mm front struts that i am taking off a car i am breaking at the moment. they will be coming off next weekend probably. would you be interested in them?
are they M-tech (thick shox)
SCOTT325SE
Married to the E30 Zone
Married to the E30 Zone
Posts: 12582
Joined: Sun Jan 09, 2005 11:00 pm
Location: Carmarthen (West Wales)

Post Sun Dec 03, 2006 9:35 pm

they are 51mm diameter, not the thinner 46mm ones if that answers the question you are asking. :cool:
User avatar
blingsta
Boost Junkie
Posts: 2930
Joined: Fri Jan 27, 2006 11:00 pm
Location: Enfield

Post Sun Dec 03, 2006 9:41 pm

errm, not really mate, see my problem is that my cab is on standard shocks with Eibach lowered springs and it sits too low for my liking as im always scraping front valance on speed humps... i wanted to go back to standard but then had this amazing idea to use the thicker shocks that ive seen on the m-techs. Im also led to believe that m-tech shocks and springs sit 15mm lower than a standard 325 set up... thats the ones i want !!! im soo confused. :cry:
kam-325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 4851
Joined: Tue Sep 27, 2005 11:00 pm
Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!

Post Sun Dec 03, 2006 9:46 pm

Mtech front shocks fit inside the standard larger diameter 51mm struts.
The Mtech suspension sits -15mm lower than standard.
Pete don't care about colour, He would shag a rainbow if he could find the end of it....
Image
SCOTT325SE
Married to the E30 Zone
Married to the E30 Zone
Posts: 12582
Joined: Sun Jan 09, 2005 11:00 pm
Location: Carmarthen (West Wales)

Post Sun Dec 03, 2006 10:13 pm

blingsta wrote:errm, not really mate, see my problem is that my cab is on standard shocks with Eibach lowered springs and it sits too low for my liking as im always scraping front valance on speed humps... i wanted to go back to standard but then had this amazing idea to use the thicker shocks that ive seen on the m-techs. Im also led to believe that m-tech shocks and springs sit 15mm lower than a standard 325 set up... thats the ones i want !!! im soo confused. :cry:
changing your shocks is gonna do absolutely fak all to change the height of your car. the eiback springs you have will govern this. they are probably -35, -40 or -60mm. Mtech springs (as SHOULD be fitted to the cabrios) will be -15mm. dampers/shocks damp the springing effects of, suprisingly, the springs. dampers will not effect the ride height. uprating the shocks will make your car return to its neutral suspension height after a large bump/ridge more quickly than a standard shock.
User avatar
orangecurry
E30 Zone Addict
E30 Zone Addict
Posts: 2518
Joined: Mon Apr 11, 2005 11:00 pm
Location: West Sussex

Post Sun Dec 03, 2006 10:20 pm

I really don't want to confuse anyone anymore, but I don't believe cabbies have M-tech shocks or springs as standard.

My two certainly didn't. :D
SCOTT325SE
Married to the E30 Zone
Married to the E30 Zone
Posts: 12582
Joined: Sun Jan 09, 2005 11:00 pm
Location: Carmarthen (West Wales)

Post Sun Dec 03, 2006 10:23 pm

orangecurry wrote:I really don't want to confuse anyone anymore, but I don't believe cabbies have M-tech shocks or springs as standard.

My two certainly didn't. :D
i was under the impression that all cabbies and tourings came with mtech stuff. having never owned either, i could be very wrong though.

all tourings after 91 came with mtech stuff i know that.
User avatar
blingsta
Boost Junkie
Posts: 2930
Joined: Fri Jan 27, 2006 11:00 pm
Location: Enfield

Post Sun Dec 03, 2006 10:24 pm

orangecurry wrote:I really don't want to confuse anyone anymore, but I don't believe cabbies have M-tech shocks or springs as standard.

My two certainly didn't. :D
i didnt think so too matey.. only the original m-tech ones have em..
However, Scott, i completley understand what your saying mate, which is why i want to replace my whole struts with m-tech set up including the springs! but the shocks have to be the thicker (m-tech ones) does that make sense matey?
gcorky
Boost Junkie
Posts: 2009
Joined: Tue Jul 12, 2005 11:00 pm
Location: n.e england

Post Sun Dec 03, 2006 10:25 pm

orangecurry wrote:I really don't want to confuse anyone anymore, but I don't believe cabbies have M-tech shocks or springs as standard.

My two certainly didn't. :D
i am thinking this as the original spec shows different,as popular believe of all tourings having mtec suspension and discs allround???

http://www.e30zone.net/modules.php?name ... nespec.htm


someones telling porkies winkeye
Image

525 sport
Martinaston
E30 Zone Addict
E30 Zone Addict
Posts: 3749
Joined: Mon Mar 14, 2005 11:00 pm
Location: London

Post Mon Dec 04, 2006 6:16 am

blingsta If your worried about your lack of girth then use 3 or 4 ribbed condoms :chuckle:

I thought the thinner struts just came on the smaller engined cars and the M-tec just applied to the springs :?
There is NO nucleus.
User avatar
blingsta
Boost Junkie
Posts: 2930
Joined: Fri Jan 27, 2006 11:00 pm
Location: Enfield

Post Mon Dec 04, 2006 7:02 pm

Martinaston wrote:blingsta If your worried about your lack of girth then use 3 or 4 ribbed condoms :chuckle:

I thought the thinner struts just came on the smaller engined cars and the M-tec just applied to the springs :?
Dude dont be starting no rumours!! :cry:
but im pretty sure that the thicker shocks come together with the m-tech springs! :?
Ant
Retired Team Member
Retired Team Member
Posts: 10496
Joined: Tue Dec 21, 2004 11:00 pm
Location: PD+E dept :D

Post Mon Dec 04, 2006 7:24 pm

to help clear this up.....

325i s had the thicker struts, but a few variations of dampers, Mtech 1 cars had the uber phat Billie inserts ( inverted) with the huuuuge strut rod( chrome bit you can see)

the later cars used the boge dampers which are more "normal looking" for later read tech 2

tourings are Mtech equipped, cabs are in a world of their own, I doubt the maker themselves knows what wenet where :lol:
Product Development and Endurance for Delphi.

Original performance chips, original works not unlicensed copies :D Email FTW
User avatar
blingsta
Boost Junkie
Posts: 2930
Joined: Fri Jan 27, 2006 11:00 pm
Location: Enfield

Post Mon Dec 04, 2006 8:12 pm

Right, so by calling it a m-tech strut/shock, it doesnt mean that the chrome bit is thicker than the standard ones, the thicker ones are the bilstein inserts.. have i got it??
kam-325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 4851
Joined: Tue Sep 27, 2005 11:00 pm
Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!

Post Mon Dec 04, 2006 9:14 pm

No.

There is not really such a thing as a "M-Tech Strut". It is the shocks and springs ( and maybe the ARB) that made the M-Tech suspension setup.

What is meant by "Thicker shocks" is the difference in the strut sizes, 46mm and 51mm, M-Tech shocks fitted inside the 51mm struts. A standard front shock for a 325i is the same "thickness" as a M-Tech one, its the length of the shiny bit that sticks out of the shock that will be different.
Pete don't care about colour, He would shag a rainbow if he could find the end of it....
Image
User avatar
blingsta
Boost Junkie
Posts: 2930
Joined: Fri Jan 27, 2006 11:00 pm
Location: Enfield

Post Mon Dec 04, 2006 9:23 pm

kam-325i wrote:No.

There is not really such a thing as a "M-Tech Strut". It is the shocks and springs ( and maybe the ARB) that made the M-Tech suspension setup.

What is meant by "Thicker shocks" is the difference in the strut sizes, 46mm and 51mm, M-Tech shocks fitted inside the 51mm struts. A standard front shock for a 325i is the same "thickness" as a M-Tech one, its the length of the shiny bit that sticks out of the shock that will be different.
Ok, im gonna give up on this now, but im 100% sure ive seen thicker shocks than mine.... thanx for all the replies guys..
kam-325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 4851
Joined: Tue Sep 27, 2005 11:00 pm
Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!

Post Mon Dec 04, 2006 9:42 pm

What is yours by the way ?
Pete don't care about colour, He would shag a rainbow if he could find the end of it....
Image
User avatar
blingsta
Boost Junkie
Posts: 2930
Joined: Fri Jan 27, 2006 11:00 pm
Location: Enfield

Post Mon Dec 04, 2006 9:48 pm

mines a 325i cab... ive just found out that the diameter on standard shocks are 36mm and the diameter on the m-tech ones are 42mm..
kam-325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 4851
Joined: Tue Sep 27, 2005 11:00 pm
Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!

Post Mon Dec 04, 2006 10:06 pm

your cab should have the 51mm (outside diameter )front struts.
Pete don't care about colour, He would shag a rainbow if he could find the end of it....
Image
Andyboy
Alpina Colada
Posts: 12577
Joined: Mon Sep 11, 2006 11:00 pm
Location: Notts

Post Mon Dec 04, 2006 11:18 pm

As do ALL E30 Tourings except for the earliest G plate 318i's. TBH there is little advantage in having the fatter struts as E30 Konis fit very nicely into the smaller struts.
The standard Boge M Technic shocks are pretty good - the difference in damping between them and the earlier Bilsteins isn't great and they give a nicer ride.
SCOTT325SE
Married to the E30 Zone
Married to the E30 Zone
Posts: 12582
Joined: Sun Jan 09, 2005 11:00 pm
Location: Carmarthen (West Wales)

Post Wed Dec 06, 2006 7:32 pm

Ant wrote:to help clear this up.....

325i s had the thicker struts, but a few variations of dampers, Mtech 1 cars had the uber phat Billie inserts ( inverted) with the huuuuge strut rod
See, what have we said all allong????.... Metal Bumpers is where its at!

Guess what i've got stashed under the bench at home? Yyyyyup... Billies! :cool: :cool: :cool: :cool:
User avatar
blingsta
Boost Junkie
Posts: 2930
Joined: Fri Jan 27, 2006 11:00 pm
Location: Enfield

Post Wed Dec 06, 2006 9:47 pm

Guess what i've got stashed under the bench at home? Yyyyyup... Billies! :cool: :cool: :cool: :cool:[/quote]

:clap: any pics? and how much if for sale?
SCOTT325SE
Married to the E30 Zone
Married to the E30 Zone
Posts: 12582
Joined: Sun Jan 09, 2005 11:00 pm
Location: Carmarthen (West Wales)

Post Thu Dec 07, 2006 10:09 pm

No pics and they will be prised from my cold dead fingers, so unfortunately not for sale bud. They will be fitted to my sport soon enough though, so will do pics then.