should my m20 sound like this

Need technical Q/A then you're in the right place

Moderator: martauto

daveo
E30 Zone Newbie
E30 Zone Newbie
Posts: 60
Joined: Sun Dec 11, 2005 11:00 pm
Location: Chester ,Cheshire

Post Sun Dec 03, 2006 12:23 pm

ive just swap the cylinder head on my 320 for a ported one with a big cam should it sound like this.http://www.youtube.com/watch?v=1Lg5NCyvKaQ
cass1_5503
E30 Zone Regular
E30 Zone Regular
Posts: 722
Joined: Sat Apr 22, 2006 11:00 pm
Location: cardiff

Post Sun Dec 03, 2006 1:07 pm

i think big cams cause bad idle i.e in the vid dont think its anything to worry about
Templ8e30
E30 Zone Addict
E30 Zone Addict
Posts: 2801
Joined: Mon Jan 10, 2005 11:00 pm
Location: Ashton-under-Lyne, Lancashire

Post Sun Dec 03, 2006 7:20 pm

What cam does it have ?

I have a ported and polished head with a 273 degree Cat cam and while it does have a lumpy idle it's not as severe as yours :?

Sound clips here http://www.e30zone.net/modules.php?name ... highlight=

Cheers,

Iain T
Image
2007 Mazda 6 2.0 estate
Political Correctness - A concept based on the idea that its possible to pick up a turd by the clean end !
daveo
E30 Zone Newbie
E30 Zone Newbie
Posts: 60
Joined: Sun Dec 11, 2005 11:00 pm
Location: Chester ,Cheshire

Post Tue Dec 05, 2006 3:16 pm

sorry ive been away for a couple of days it a 288 camshaft what valvetrain setup ate u using.
Templ8e30
E30 Zone Addict
E30 Zone Addict
Posts: 2801
Joined: Mon Jan 10, 2005 11:00 pm
Location: Ashton-under-Lyne, Lancashire

Post Tue Dec 05, 2006 8:06 pm

I'm using standard but new genuine BMW valve springs/rockers etc.

Cheers,

Iain T
Image
2007 Mazda 6 2.0 estate
Political Correctness - A concept based on the idea that its possible to pick up a turd by the clean end !
Globulator
E30 Zone Regular
E30 Zone Regular
Posts: 389
Joined: Fri Sep 23, 2005 11:00 pm

Post Tue Dec 05, 2006 11:14 pm

daveo wrote:ive just swap the cylinder head on my 320 for a ported one with a big cam should it sound like this.http://www.youtube.com/watch?v=1Lg5NCyvKaQ
I discovered that valve clearances are very critical to good idle. Get a few slightly too close and it will not be smooth at all!!
1986 325i 'vert, funk louder than standard.
"No Mr Bond, I expect you to tell me why your 4 litre, 282bhp sports car can't outrun some lardy old Mercs.."
Audio & electronic software: http://www.cutestudio.net