electrical gremlin strikes again. any ideas???

Need technical Q/A then you're in the right place

Moderator: martauto

karaokebykris
E30 Zone Newbie
E30 Zone Newbie
Posts: 217
Joined: Sun Jul 30, 2006 11:00 pm
Location: Staffs

Post Sun Dec 03, 2006 10:58 am

Give you as much info as possible and see if someone can help me with this very annoying gremlin

Problem....
Occasionally car will not start. Ignition lights come on. turn key to start and nothing, no starter spinning. just silence, sometimes after 2-3 seconds it will start.

Car.....
'88 1766cc M10 Carb

What I have tried so far......

1. Definatley NOT the starter motor/solenoid as I have replaced engine since problem started and has continued.

2. Cleaned all the connections on the ignition barrel so not that.

3. Wired in a starter switch (+ve to switch, switch to small nut on solenoid) so not the wiring from the ignition switch

Now with point 3 above. If i turn on the ignition I can start the car using the switch, BUT if the ignition switch will not activate the starter neither will the starter switch.

now for the really really strange bit......

if the car will not start from either the conventional key or secondary switch. I can leave the ignition on, open the bonnet, and start the car using a jump lead from the +ve battery terminal to the small connection on the solenoid (exactly the same as my secondary switch)

This is what is really confusing me. I am using exactly the same process for each method yet getting different results!!
It is meaningless to ask; which is real, 'real' or imaginary? It is simply a matter of which is the more useful description

"One valuable thing to remember is that light tavels faster than sound, some people appear quite bright until they speak
karaokebykris
E30 Zone Newbie
E30 Zone Newbie
Posts: 217
Joined: Sun Jul 30, 2006 11:00 pm
Location: Staffs

Post Sun Dec 03, 2006 11:12 am

Just thought of some more information

When i turn on the ignition all the normal warning lights come on and it will start but.....

if i turn on the ignition and all the warning lights except the brake pad light come on it will not start, tho the brake pad warning light does come on when i flick the starter although the starter does not do anything.

not a good look having to start car from under the bonnet! :x
It is meaningless to ask; which is real, 'real' or imaginary? It is simply a matter of which is the more useful description

"One valuable thing to remember is that light tavels faster than sound, some people appear quite bright until they speak
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Sun Dec 03, 2006 11:39 am

karaokebykris wrote:
3. Wired in a starter switch (+ve to switch, switch to small nut on solenoid) so not the wiring from the ignition switch
Where exactly have you connected "+ve to switch"?
Check the connections of the two small terminals which bolt onto the battery + terminal, then check that an allen bolt that is visible in the top face of the fusebox is tight. This bolt is the other end of one of the small wires on the battery terminal.
karaokebykris
E30 Zone Newbie
E30 Zone Newbie
Posts: 217
Joined: Sun Jul 30, 2006 11:00 pm
Location: Staffs

Post Sun Dec 03, 2006 12:06 pm

Cheers Brian,

Secondary starter switch is wried direct to battery so no fuse issues. Will double check all these connections, any other ideas? being an intermittent fault is is very difficult to test as you will know lol
It is meaningless to ask; which is real, 'real' or imaginary? It is simply a matter of which is the more useful description

"One valuable thing to remember is that light tavels faster than sound, some people appear quite bright until they speak
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Sun Dec 03, 2006 1:05 pm

karaokebykris wrote:using a jump lead from the +ve battery terminal to the small connection on the solenoid
Which appears to be exactly the same as your bypass switch, except for the lack of switch!
This is what made me think it might be the auxiliary battery terminals, but if you're sure that both your jump lead and bypass switch lead are definitely both making contact to the battery +, then this isn't the problem.
There are two parts to a circuit of course: the battery + to the starter and starter solenoid (two independent circuits), but they have a common return path to the battery negative, through the engine to body earth strap and the battery neg. lead. A 12volt lamp connected between the battery negative and engine metalwork may show something.
A quick way of bypassing the starter switch circuit is to remove the cap on the engine diagnostic socket and short pin 7 (black/yellow starter signal wire) to pin 14 (red, 12V+ from one of the small connections on the battery + terminal)