Hi guys and gals,
Some cunning stunt drove into my rear near side door in a car park and then drove off. I came out of the cinema and fortunately did not catch them!
I have been poddering my options.
The dent is uniform and there appear to be no creases in the metal, so i am hoping to sucker cup pull out the dent.
A sucker cup is available from eurocarparts for £8 so i'm thinking that it is worth a shot first.
Has anyone tried DIY panel beating/pulling? a beating
I'll post some pictures if that would help?
cheers
NSR door stoved in by incompetent driver
Moderator: martauto
-
djezd
- E30 Zone Newbie

- Posts: 88
- Joined: Sun Oct 08, 2006 11:00 pm
Last edited by djezd on Wed Dec 06, 2006 5:24 pm, edited 1 time in total.
-
Simon
- E30 Zone Team Member

- Posts: 14939
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: South Wales
Access to the dent should be easy enough from the inside of the door, just remove the doorcard.

-
dobbie82
- E30 Zone Addict

- Posts: 4125
- Joined: Thu May 05, 2005 11:00 pm
- Location: Dolgellau, Wales (NOT A TRADER,broken a car,got lots of bits)
Simon wrote:Access to the dent should be easy enough from the inside of the door, just remove the doorcard.
I agree with simon, easier to tap it out than suck it out, my dad used a block of wood with a flat edge against the dent and a soft mallet and tapped it flat from the inside.
dont know if that is the right way but its the cheapest! (dad is a panel beater, so he should know what he is doing!)
e30 related ebay auctions + shop(MY Stuff for Sale), http://tinyurl.com/64aufr
My Feedback on the e30zone: http://tinyurl.com/dobbie82feedback
My Feedback on the e30zone: http://tinyurl.com/dobbie82feedback
-
djezd
- E30 Zone Newbie

- Posts: 88
- Joined: Sun Oct 08, 2006 11:00 pm
Hi guys,
cheers for the adice, i have made it much less noticable just by pushing from the inside with my hand. It will need some tappy tappy work on it though.
cheers for the adice, i have made it much less noticable just by pushing from the inside with my hand. It will need some tappy tappy work on it though.
