Can anyone give me the dimentions of the inlet side of the head?
i need the diameter of the inlets, the length between the studs and the length between the centres of the inlet openings.
Trying to get an idea of how much modding these tb's are going to need and dont really want to start ripping the inlet manifold off just yet.
M20 head dimensions
Moderator: martauto
-
Andy335Touring
- Married to the E30 Zone

- Posts: 7144
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Long Eaton,Nottingham
Try putting a wanted add for a scrap head as you can mess around with your TB's/manifold with out dissabling your car ?
-
tee
- E30 Zone Newbie

- Posts: 150
- Joined: Sat Jan 22, 2005 11:00 pm
I have put a post up in the wanted section for a scrap head
-
stuartgallafant
- E30 Zone Addict

- Posts: 4531
- Joined: Tue Mar 29, 2005 11:00 pm
- Location: Costa del Croydon
-
miniblob
- E30 Zone Addict

- Posts: 3153
- Joined: Thu Jan 05, 2006 11:00 pm
- Location: Croydon/Uckfield
Why not use the creamy engine your gonna take out of my 325 to do your messing about!!!!!!!!! Still runs - just a bit smokey - sometimes!!
327 Touring with bass!!!
>>> WWW.DNRVINYL.CO.UK >>> UK GARAGE SPECIALIST >>>
>>> WWW.DNRVINYL.COM >>> FREE MIX DOWNLOADS!!! >>>
>>> WWW.DNRVINYL.CO.UK >>> UK GARAGE SPECIALIST >>>
>>> WWW.DNRVINYL.COM >>> FREE MIX DOWNLOADS!!! >>>
-
tee
- E30 Zone Newbie

- Posts: 150
- Joined: Sat Jan 22, 2005 11:00 pm
Cheers stu and rob. Will give you both a call.
Stu, up for a beer in the lion about 4.30?? will bell you anyway
Stu, up for a beer in the lion about 4.30?? will bell you anyway
-
stuartgallafant
- E30 Zone Addict

- Posts: 4531
- Joined: Tue Mar 29, 2005 11:00 pm
- Location: Costa del Croydon

