Electrical Gremlins!

Need technical Q/A then you're in the right place

Moderator: martauto

Cyruz
E30 Zone Newbie
E30 Zone Newbie
Posts: 219
Joined: Sat Oct 15, 2005 11:00 pm
Location: Bournemouth

Post Thu Nov 30, 2006 9:09 pm

After a chain of things going wrong with my car and being fixed one by one, now it refuses to turn over.

I replaced the starter as the old one was fried, the new one works fine if you run a 12v live to it but isn't getting enough power from the bmw wiring. The battery is getting 12v+ but the live for the alternator is only getting 8v... Also the ICV isn't buzzing so I guess thats not getting power, the injectors aren't firing either so I'm guessing the AFM isn't getting any power either. I guess these all must run of the same ignition live wire thats not getting enough power to turn the engine and start the car.

I've also noticed that the fuel pump runs constantly (as if bridged) with the starter disconnected but if I connect it refuses to prime/run at all.

I've got the auto sparky coming 2moz to have a look but was wondering if anyone had a vague clue about whats going on, it was working fine before I removed the ECU and replaced. The only thing I can think of is that it's disturbed and already loose connection under the dash, also I've got an aftermarket alarm fitted that looks very unprofessionaly done with wiring everywhere, I believe this to be the voltage stealing culprit....

Anyone waver a guess?
Image
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Thu Nov 30, 2006 10:40 pm

The are two parts to an electrical circuit - The live (positive) feed and the earth (negative) return.
Try checking out the engine earth strap.(Put your meter between the engine metalwork and the body metalwork).
wildeian
E30 Zone Regular
E30 Zone Regular
Posts: 851
Joined: Thu Mar 09, 2006 11:00 pm
Location: Colchester, Essex

Post Fri Dec 01, 2006 12:34 am

You haven't left an earth off have you?

Alarms/immobilisers are often earthed at the ECU mounting screws.
Cyruz
E30 Zone Newbie
E30 Zone Newbie
Posts: 219
Joined: Sat Oct 15, 2005 11:00 pm
Location: Bournemouth

Post Fri Dec 01, 2006 1:21 pm

Will check guy, I think I already checked the engine earths but not the alarm ecu earth!

Thanks
Image
Cyruz
E30 Zone Newbie
E30 Zone Newbie
Posts: 219
Joined: Sat Oct 15, 2005 11:00 pm
Location: Bournemouth

Post Fri Dec 01, 2006 6:46 pm

Was dead alarm stopping voltage being transfer to engine, just need to remove it all from the system.
Image