Gear boxs ?

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
exup
Boost Junkie
Posts: 351
Joined: Tue Mar 08, 2005 11:00 pm

Post Tue Nov 28, 2006 9:20 am

Hi
i need some help re auto boxs ie

Are all Switchable auto boxs the same ?
Or was there changes over the years ?

Also were there any weak points or upgrades to do with they boxs ?, which is more reliable the std or switchable auto box ?

would any Switchable auto box fitt? ie i ve been offered one of E28 M525 85 model, is that like to be different at bell housing ? to a m2.5 lump
Thanks
mrLEE30
E30 Zone Team Member
E30 Zone Team Member
Posts: 6589
Joined: Tue Jan 18, 2005 11:00 pm
Location: Sweating buckets in Bahrain

Post Tue Nov 28, 2006 2:36 pm

the switchable auto is the 4HP22EH model 4 speed box, this is fitted to all 6 cyl E30's with switchable control, the non switchable is the 4HP22H. the fitment of both is identicale on the M20 engine, the non-switchables are a waste of time IMO there were no real weak points, although the earlier 3 speeds only for 4 cly were bombproof, the 4 speeds are just as good. i have a few and never had problems.
the E28 had a 4 speed from 83 onwards and as the 525 (there was no M525 only an M535)used the M20 engine but with the early L-jetronic injection the bell housings should be the same, you will also need the switching control unit, what i am not sure of is will the control unit designed for the E28 with L-jetronic engine management system talk to the Bosch Motronic system, you may need to check if the plug on your E30 autobox control unit is the same as the E28 one. If they are chances are you could use the E28box with the E30 control unit.

BUT I AM NOT POSITIVE ABOUT THIS!!!!!

easier and wothwile change is swap it to a manual - better performance,economy and not too hard with a donor scrap car (certainly easlier then messing around with old and new auto control units)

mrlee
Image
User avatar
exup
Boost Junkie
Posts: 351
Joined: Tue Mar 08, 2005 11:00 pm

Post Tue Nov 28, 2006 10:12 pm

OPS
thanks for the info , i made a mistake and put 525 instead of 535

I SHOULD HAVE SAID

ie i ve been offered one of E28 M535 85 model, is that like to be different at bell housing ? to a m2.5 lump
IE BIG 6 BELHOUSE THE SAME AS SMALL 6 ONE OR ARE THEY SWAPPABLE ?

thanks
mrlee
_________________
Andyboy
Alpina Colada
Posts: 12577
Joined: Mon Sep 11, 2006 11:00 pm
Location: Notts

Post Tue Nov 28, 2006 10:53 pm

No. Just use the right box for the right car. Nothing else will work properly (if at all).
Martinaston
E30 Zone Addict
E30 Zone Addict
Posts: 3749
Joined: Mon Mar 14, 2005 11:00 pm
Location: London

Post Wed Nov 29, 2006 6:39 am

The switchable auto has a whole other loom running around the interior of the car and also a different engine loom and throttle position switch compared to the standard auto, So you can't just swap from one type to the other.
There is NO nucleus.
User avatar
exup
Boost Junkie
Posts: 351
Joined: Tue Mar 08, 2005 11:00 pm

Post Thu Nov 30, 2006 9:41 am

Thanks ,
But i have a switchable auto already in car
, just want a spare, and was offered one from a 535 e28, and wondered if the box wouls fit , ie bell houses all the same or even if it fitted would the electronics be different/ a problem?
Martinaston
E30 Zone Addict
E30 Zone Addict
Posts: 3749
Joined: Mon Mar 14, 2005 11:00 pm
Location: London

Post Thu Nov 30, 2006 9:43 am

I've got one for sale.
There is NO nucleus.