oil feed
Moderator: martauto
-
mrgtsx
- E30 Zone Newbie
- Posts: 82
- Joined: Mon Nov 06, 2006 11:00 pm
hey guys. just regarding the turbo conversion on the m20. how did some of you guys go about with the oil feed on the turbo got any pictures oh and the water lines would be good as well thanks
-
Ant
- Retired Team Member
- Posts: 10496
- Joined: Tue Dec 21, 2004 11:00 pm
- Location: PD+E dept :D
T piece from the oil pressure warning switch, its in the main oil gallery , lower RHS of the block dude, return goes into the sump as high as you can get it ( above static oil level!!)
as for water cooling, I've not used it but you can use the feed to and from the throttle body plate and connect that to the turbo coolant feed.
will dig a pic out later if no-one beats me too it.
HTH
as for water cooling, I've not used it but you can use the feed to and from the throttle body plate and connect that to the turbo coolant feed.
will dig a pic out later if no-one beats me too it.
HTH
Product Development and Endurance for Delphi.
Original performance chips, original works not unlicensed copies Email FTW
Original performance chips, original works not unlicensed copies
Email FTW-
mrgtsx
- E30 Zone Newbie
- Posts: 82
- Joined: Mon Nov 06, 2006 11:00 pm
thank you! i was thinking about the oil pressure switch that helps heaps