Anyone shed any light on it as i can't
I have a foreign body in my 320 touring! UPDATE WITH PICS!
Moderator: martauto
-
SPADGE
- Married to the E30 Zone

- Posts: 7373
- Joined: Wed Aug 09, 2006 11:00 pm
- Location: Milton Keynes, Bucks
I was doing a few routine maintenance jobs on my 320 touring today when i spotted a pipe which doesn't connect to anything and i havn't seen one before like it! It is on the passenger side under the bonnet and is laying on the chasis rail finishing in line with the abs box. It has a banjo type end affixed to a thick rubber pipe very similar to a power steering pipe but then it goes intowhat looks like a metal brake line and back under the car to the rear and finishes top right under the passenger wheel arch where it has the same rubber pipe and banjo connector and it is tied up and connects to nothing
Anyone shed any light on it as i can't
Anyone shed any light on it as i can't
Last edited by SPADGE on Thu Nov 30, 2006 11:59 am, edited 3 times in total.
-
kam-325i
- E30 Zone Team Member

- Posts: 4851
- Joined: Tue Sep 27, 2005 11:00 pm
- Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!
remains of a LPG conversion ?????
Pete don't care about colour, He would shag a rainbow if he could find the end of it....


-
SPADGE
- Married to the E30 Zone

- Posts: 7373
- Joined: Wed Aug 09, 2006 11:00 pm
- Location: Milton Keynes, Bucks
Crossed my mind mate!kam-325i wrote:remains of a LPG conversion ?????
I'll have a good look in the spare wheel well etc...tomorrow to see if i can find any evidence of a tank having been in there.
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Think you'll find that's the vent line from the fuel tank! Free end should be pushed into one of the holes in the reinforcing bracket for the front left suspension turret. Goes to a carbon canister if you have an emissions equipped car, then to a solenoid valve, (spare connector off the AFM loom), and then to the inlet manifold. (spare pipe connected to nothing at one end hanging off the inlet manifold on 4 pots).
-
SPADGE
- Married to the E30 Zone

- Posts: 7373
- Joined: Wed Aug 09, 2006 11:00 pm
- Location: Milton Keynes, Bucks
Brian i know what you mean but its nothing like that. I had one of those on the L plater that i have just converted and it was just like a 3rd fule pipe running into the carbon cannister etc..This has the big rubber pipe at each end with the banjo connectors as i said just like the ones going to the power steering pump!Brianmoooore wrote:Think you'll find that's the vent line from the fuel tank! Free end should be pushed into one of the holes in the reinforcing bracket for the front left suspension turret. Goes to a carbon canister if you have an emissions equipped car, then to a solenoid valve, (spare connector off the AFM loom), and then to the inlet manifold. (spare pipe connected to nothing at one end hanging off the inlet manifold on 4 pots).
-
SPADGE
- Married to the E30 Zone

- Posts: 7373
- Joined: Wed Aug 09, 2006 11:00 pm
- Location: Milton Keynes, Bucks
btw this is a 1990/H 320i
-
SPADGE
- Married to the E30 Zone

- Posts: 7373
- Joined: Wed Aug 09, 2006 11:00 pm
- Location: Milton Keynes, Bucks
And whilst we are on that subject Brian what should i have done with this 3rd line on my converted touring as i have done away with the cannister? I have just blocked it off for now is that ok or should it just vent to atmosphere??
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
In that case I've never seen anything like it either.SPADGE wrote:Brian i know what you mean but its nothing like that. I had one of those on the L plater that i have just converted and it was just like a 3rd fule pipe running into the carbon cannister etc..This has the big rubber pipe at each end with the banjo connectors as i said just like the ones going to the power steering pump!Brianmoooore wrote:Think you'll find that's the vent line from the fuel tank! Free end should be pushed into one of the holes in the reinforcing bracket for the front left suspension turret. Goes to a carbon canister if you have an emissions equipped car, then to a solenoid valve, (spare connector off the AFM loom), and then to the inlet manifold. (spare pipe connected to nothing at one end hanging off the inlet manifold on 4 pots).
Doesn't really sound like a LPG pipe. That is normally black plastic covered 6mm steel pipe, and shouldn't have any rubber bits.
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Don't block it off! You'll suck the fuel tank flat! Tuck the end of the rubber hose into the strut reinforcement.SPADGE wrote:And whilst we are on that subject Brian what should i have done with this 3rd line on my converted touring as i have done away with the cannister? I have just blocked it off for now is that ok or should it just vent to atmosphere??
-
SPADGE
- Married to the E30 Zone

- Posts: 7373
- Joined: Wed Aug 09, 2006 11:00 pm
- Location: Milton Keynes, Bucks
I'll have a better look tomorrow and maybe take a pic or two as they may help identify it.Brianmoooore wrote:In that case I've never seen anything like it either.SPADGE wrote:Brian i know what you mean but its nothing like that. I had one of those on the L plater that i have just converted and it was just like a 3rd fule pipe running into the carbon cannister etc..This has the big rubber pipe at each end with the banjo connectors as i said just like the ones going to the power steering pump!Brianmoooore wrote:Think you'll find that's the vent line from the fuel tank! Free end should be pushed into one of the holes in the reinforcing bracket for the front left suspension turret. Goes to a carbon canister if you have an emissions equipped car, then to a solenoid valve, (spare connector off the AFM loom), and then to the inlet manifold. (spare pipe connected to nothing at one end hanging off the inlet manifold on 4 pots).
Doesn't really sound like a LPG pipe. That is normally black plastic covered 6mm steel pipe, and shouldn't have any rubber bits.
Cheers Spadge..
-
SPADGE
- Married to the E30 Zone

- Posts: 7373
- Joined: Wed Aug 09, 2006 11:00 pm
- Location: Milton Keynes, Bucks
Ok will do don't panic Mr ManneringBrianmoooore wrote:Don't block it off! You'll suck the fuel tank flat! Tuck the end of the rubber hose into the strut reinforcement.SPADGE wrote:And whilst we are on that subject Brian what should i have done with this 3rd line on my converted touring as i have done away with the cannister? I have just blocked it off for now is that ok or should it just vent to atmosphere??
-
SPADGE
- Married to the E30 Zone

- Posts: 7373
- Joined: Wed Aug 09, 2006 11:00 pm
- Location: Milton Keynes, Bucks
Thought i would check this out today and see where the pipes go!
Opened the boot and removed the spare to find this


Then removed that to find these

Its got BMW on the white lid thing so its obviously factory but what is it??? Suspension related????
Opened the boot and removed the spare to find this


Then removed that to find these

Its got BMW on the white lid thing so its obviously factory but what is it??? Suspension related????
-
oze30
- E30 Zone Addict

- Posts: 4133
- Joined: Mon Oct 24, 2005 11:00 pm
- Location: Sydney
I think its for rear shocks when towing... self adjusting dampers??
ETK?
ETK?
-
eko
- Old timer
- Posts: 11531
- Joined: Sat Feb 05, 2005 11:00 pm
- Location: South Devon
Similar set up to an E34 tourer,weight adjustable steering?

-
oze30
- E30 Zone Addict

- Posts: 4133
- Joined: Mon Oct 24, 2005 11:00 pm
- Location: Sydney
-
oze30
- E30 Zone Addict

- Posts: 4133
- Joined: Mon Oct 24, 2005 11:00 pm
- Location: Sydney
wonder how much it was worth
-
SPADGE
- Married to the E30 Zone

- Posts: 7373
- Joined: Wed Aug 09, 2006 11:00 pm
- Location: Milton Keynes, Bucks
Cheers guys thats that riddle solved 
-
Skip
- E30 Zone Regular

- Posts: 309
- Joined: Fri Apr 15, 2005 11:00 pm
- Location: Norfolk
Add that to the "rare parts" thread Jules! 
ex-325i Touring
-
TouringMatt
- E30 Zone Camper

- Posts: 1188
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Not where i should be
Quality find 
-
SPADGE
- Married to the E30 Zone

- Posts: 7373
- Joined: Wed Aug 09, 2006 11:00 pm
- Location: Milton Keynes, Bucks
Skip - somebody already has
Matt - Yeah great but no use to me or the car but for novelty value its priceless
Matt - Yeah great but no use to me or the car but for novelty value its priceless
-
buster
- E30 Zone Addict

- Posts: 3779
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Near middlesbrough,Teesside
thats well bizzare.I've never seen that before.I bet many werent fitted with that 
-
316vinni
- E30 Zone Newbie

- Posts: 100
- Joined: Sat Aug 19, 2006 11:00 pm
Ive never seen that before 
-
stuartgallafant
- E30 Zone Addict

- Posts: 4531
- Joined: Tue Mar 29, 2005 11:00 pm
- Location: Costa del Croydon
-
Trent
- E30 Zone Newbie

- Posts: 1
- Joined: Sat Dec 02, 2006 11:00 pm
Funnily enuff neither had I untill i bought my touring off ebay last month. but sure enuff thats what it is. The fluid is different i believe and it sits in a pot where the pas normally is. (does both?)
but since most people here are suprised to see t does any body know of its advantages? handling wise? the guy i bought my car off said it was the best handling car he'd driven but then the previous 325 i had was(to me), lowered mtech + 40 i think??? this one i havent driven yet as the head gasket has gone and i'm slowley repairing it.
but since most people here are suprised to see t does any body know of its advantages? handling wise? the guy i bought my car off said it was the best handling car he'd driven but then the previous 325 i had was(to me), lowered mtech + 40 i think??? this one i havent driven yet as the head gasket has gone and i'm slowley repairing it.
-
Martinaston
- E30 Zone Addict

- Posts: 3749
- Joined: Mon Mar 14, 2005 11:00 pm
- Location: London
Spadge, get a pic of the bit under the car if you can. Is it linked to the roll bar ?
You could modify it so it reverses body roll when you throw it into a corner
You could modify it so it reverses body roll when you throw it into a corner
There is NO nucleus.
-
kombikat
- E30 Zone Newbie

- Posts: 53
- Joined: Thu Jan 20, 2005 11:00 pm
My lhd tourer is fitted with self-levelling so it keeps it end up when heavily laden and not many can say that!
It was extra and cost c£1000 when new.
It involves a different pas pump and uses Pentosin oil (either green or red).
Gordon
It was extra and cost c£1000 when new.
It involves a different pas pump and uses Pentosin oil (either green or red).
Gordon

