I am converting the manual windows in my 2 door coupe to leccy windows.
Question is - I have removed a leccy window loom from a touring which had front leccy windows but rear windup windows. What do i do with the parts of the loom that come from the rear doors and tailgate. Do i just leave them unconnected adn it should work or what?
cheers
Leccy window conversion
Moderator: martauto
-
eamo
- E30 Zone Regular

- Posts: 465
- Joined: Tue Feb 22, 2005 11:00 pm
- Location: Offaly, Ireland
anyone?
-
stuartgallafant
- E30 Zone Addict

- Posts: 4531
- Joined: Tue Mar 29, 2005 11:00 pm
- Location: Costa del Croydon
-
oze30
- E30 Zone Addict

- Posts: 4133
- Joined: Mon Oct 24, 2005 11:00 pm
- Location: Sydney
Slight problem. You have a 2 door. You took the mechs out of a touring (4 door) The brackets are different from 2 to 4 door. (2 door has a longer bracket)eamo wrote:I am converting the manual windows in my 2 door coupe to leccy windows.
Question is - I have removed a leccy window loom from a touring which had front leccy windows but rear windup windows. What do i do with the parts of the loom that come from the rear doors and tailgate. Do i just leave them unconnected adn it should work or what?
cheers
-
eamo
- E30 Zone Regular

- Posts: 465
- Joined: Tue Feb 22, 2005 11:00 pm
- Location: Offaly, Ireland
which bracket do you mean? Its just the loom i took out of the touring. The door internals i have fom a 2 door alright
-
smithy318i
- Engaged to the E30 Zone

- Posts: 5797
- Joined: Thu Apr 28, 2005 11:00 pm
- Location: Tyne & Wear
you can leave them unconnected, or remove the wires you want from the loom.eamo wrote:I am converting the manual windows in my 2 door coupe to leccy windows.
Question is - I have removed a leccy window loom from a touring which had front leccy windows but rear windup windows. What do i do with the parts of the loom that come from the rear doors and tailgate. Do i just leave them unconnected adn it should work or what?
cheers

-
oze30
- E30 Zone Addict

- Posts: 4133
- Joined: Mon Oct 24, 2005 11:00 pm
- Location: Sydney
Sorry misread loom! Doh!!smithy318i wrote:you can leave them unconnected, or remove the wires you want from the loom.eamo wrote:I am converting the manual windows in my 2 door coupe to leccy windows.
Question is - I have removed a leccy window loom from a touring which had front leccy windows but rear windup windows. What do i do with the parts of the loom that come from the rear doors and tailgate. Do i just leave them unconnected adn it should work or what?
cheers
-
eamo
- E30 Zone Regular

- Posts: 465
- Joined: Tue Feb 22, 2005 11:00 pm
- Location: Offaly, Ireland
do i have to do any cutting??smithy318i wrote:you can leave them unconnected, or remove the wires you want from the loom.eamo wrote:I am converting the manual windows in my 2 door coupe to leccy windows.
Question is - I have removed a leccy window loom from a touring which had front leccy windows but rear windup windows. What do i do with the parts of the loom that come from the rear doors and tailgate. Do i just leave them unconnected adn it should work or what?
cheers
-
smithy318i
- Engaged to the E30 Zone

- Posts: 5797
- Joined: Thu Apr 28, 2005 11:00 pm
- Location: Tyne & Wear
yes, lots.

-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
The widow wiring loom is integrated with the central locking loom, and connects to the main loom by three(?) wires
at/near the driver's door pillar socket. Loom is also under the carpets.
Easier to just use the part of the loom around the switches and the sub loom with the relay in the glovebox (so that the windows work with the doors open, ignition off), and then to run a two core cable through the hole in each door pillar socket into the doors and to the motors.
This is the way it's done on the dealer retrofit electric front windows.
at/near the driver's door pillar socket. Loom is also under the carpets.
Easier to just use the part of the loom around the switches and the sub loom with the relay in the glovebox (so that the windows work with the doors open, ignition off), and then to run a two core cable through the hole in each door pillar socket into the doors and to the motors.
This is the way it's done on the dealer retrofit electric front windows.
-
eamo
- E30 Zone Regular

- Posts: 465
- Joined: Tue Feb 22, 2005 11:00 pm
- Location: Offaly, Ireland
cheers lads

