2.5 block with 2.0 head

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

User avatar
Timo21
E30 Zone Newbie
E30 Zone Newbie
Posts: 5
Joined: Mon Aug 28, 2006 11:00 pm
Location: South Africa

Post Fri Nov 24, 2006 8:47 am

Hi Guys

Iv got a 2.5 Sub assembly with a 2.0l head.
Iv lined up all the marks, put the timing belt on, but
the crank rotates about 45 deg. then feels like its hitting a valve.
Could the cut cam have anything to do with it or cant a 20l head work
on a 325 sub..
Richy325iTouring
E30 Zone Addict
E30 Zone Addict
Posts: 3490
Joined: Sun Jan 09, 2005 11:00 pm
Location: Newport SouthWales

Post Fri Nov 24, 2006 10:04 am

320 head wont work on 325 bottom end
Image
johnono
E30 Zone Addict
E30 Zone Addict
Posts: 4677
Joined: Mon Jan 10, 2005 11:00 pm
Location: land of the vikings

Post Fri Nov 24, 2006 11:52 am

sorry i diddnt read before i posted :oops:
Andyboy
Alpina Colada
Posts: 12577
Joined: Mon Sep 11, 2006 11:00 pm
Location: Notts

Post Fri Nov 24, 2006 3:14 pm

It won't turn over. Ever. The 325i pistons have a raised front lip, 320i ones are flat. The 325i head has a machined raised section in the combustion chambers to accomodate the 325i raised crown pistons, 320i heads don't. Sorry mate but you need a 325i head!

I have two, in case you need one...........
bottlecapE30
E30 Zone Regular
E30 Zone Regular
Posts: 481
Joined: Tue Jan 11, 2005 11:00 pm
Location: Baltimore, MD USA

Post Sat Nov 25, 2006 3:17 am

it should work if you shave 3mm off the pistons.
Image
1987 2.7l e30 m20b27 supercharging
1991 3.5l e30 m30b35 it is dead so sad
1985 3.5l e23 m30b35
Andyboy
Alpina Colada
Posts: 12577
Joined: Mon Sep 11, 2006 11:00 pm
Location: Notts

Post Sat Nov 25, 2006 11:57 am

And weaken the piston crown.........

No, really NOT a good idea!

Just fit a 325i head and do it properly. :D
trigger
E30 Zone Newbie
E30 Zone Newbie
Posts: 123
Joined: Wed Apr 12, 2006 11:00 pm
Location: harlow

Post Sun Nov 26, 2006 4:14 pm

you can always have the piston crowns pocketed to clear the valves, quite a common practice , piston crown thickness allowing ! of course.
trigger
E30 Zone Newbie
E30 Zone Newbie
Posts: 123
Joined: Wed Apr 12, 2006 11:00 pm
Location: harlow

Post Sun Nov 26, 2006 4:18 pm

just out of curiosity what do you think you might gain using a 320 head instead of a 325 head taking into consideration what machining might be involved that would just as easily be undertaken on the 325 head?!
Andyboy
Alpina Colada
Posts: 12577
Joined: Mon Sep 11, 2006 11:00 pm
Location: Notts

Post Sun Nov 26, 2006 10:09 pm

trigger wrote:you can always have the piston crowns pocketed to clear the valves, quite a common practice , piston crown thickness allowing ! of course.
Pointles tho - the valve cutouts aren't the issue and the 325i cutouts are more than big enough anyway. When you can buy a 325i head for £509-£100 it's all a bit pointless! :D
kam-325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 4851
Joined: Tue Sep 27, 2005 11:00 pm
Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!

Post Sun Nov 26, 2006 10:15 pm

Are'nt the valves on the 320i head smaller than the 325i head ?
Pete don't care about colour, He would shag a rainbow if he could find the end of it....
Image
Andyboy
Alpina Colada
Posts: 12577
Joined: Mon Sep 11, 2006 11:00 pm
Location: Notts

Post Sun Nov 26, 2006 10:18 pm

Yes.
kam-325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 4851
Joined: Tue Sep 27, 2005 11:00 pm
Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!

Post Sun Nov 26, 2006 10:19 pm

So why bother then ?????
Pete don't care about colour, He would shag a rainbow if he could find the end of it....
Image
Andyboy
Alpina Colada
Posts: 12577
Joined: Mon Sep 11, 2006 11:00 pm
Location: Notts

Post Sun Nov 26, 2006 10:44 pm

Exactly! It's a lot of work in order to lose power.
trigger
E30 Zone Newbie
E30 Zone Newbie
Posts: 123
Joined: Wed Apr 12, 2006 11:00 pm
Location: harlow

Post Tue Nov 28, 2006 12:28 am

andyboy, does this mean that the piston crowns at tdc are higher than the top face of the block, if so is it still possible to skim head to raise compression ratio? without having to have crowns machined as ive yet to see inside my 325 head, new to them you see.
Andyboy
Alpina Colada
Posts: 12577
Joined: Mon Sep 11, 2006 11:00 pm
Location: Notts

Post Tue Nov 28, 2006 11:54 am

trigger wrote:andyboy, does this mean that the piston crowns at tdc are higher than the top face of the block
Yes. That's why only a 325i head will fit. If you machine too much from a 325i head the piston tops will clout the head - look on the head face and there are some small round recesses. These are skimming marks. Skim past these and you're in trouble. Basically, don't skim the head unless you absolutely have to, such as when doing a head gasket.