rear anti roll bar

[jamesh1977]

hi just bought a rear anti roll bar from an m3 off ebay a bit of a spur of the moment thing... will this be straight forward fit onto my 320i which is running 325i gear. im fitting 325i trailing arms in the near future so was going to do the rear anti roll bar at the same time.. is this straigh forward? or will it be a nightmare? also does it make a noticeable diffrence?

[Theo]

This thread should answer your questions.

http://www.e30zone.net/modules.php?name ... ic&t=51035

[jamesh1977]

hi theo so with the looks of what im reading as im going to be using 325isport reartrailingarms i should be on a winner? do you think it will make a noticeable diffrence?

[Theo]

Well, as I said in that thread, a 1mm increase in diameter increases the cross sectional area by 15%, so there will be added strength. I did this change on my car and it handles pretty nicely.

[jamesh1977]

is it a big job to do or straight forward? all info would be great cheers theo

[Bob_S]

if you unbolt the bush on the diff and slip it over the top it is a piece of piss mate