M42 fuel pipes?
Moderator: martauto
-
bennyboy
- E30 Zone Newbie

- Posts: 218
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: West Sussex
im using loads of fuel at the mo with this new engine. i got 100 miles out of £20. However, when i stop, it stinks of petrol. are the pipes round the engine prone to failing?

16V IS engine!!!
-
Bob_S
- Engaged to the E30 Zone

- Posts: 5412
- Joined: Sat Jun 11, 2005 11:00 pm
- Location: chester, cheshire
could be the o-rings around the injectors, easy to replace 
Bollocks to this 24v scrap!
-
stuartgallafant
- E30 Zone Addict

- Posts: 4531
- Joined: Tue Mar 29, 2005 11:00 pm
- Location: Costa del Croydon
-
Dan318-is
- Married to the E30 Zone

- Posts: 8006
- Joined: Wed Jul 06, 2005 11:00 pm
- Location: Surrey/London
The pipes in the engine bay themselves are fine; its a small 2 inch rubber connecting pipe that leeds from the fuel feed to the injector rail itself; the return one hardly ever perishes in my experience.
Number 15 is the leaking candidate!

Number 15 is the leaking candidate!

-
E30Mark
- E30 Zone Team Member

- Posts: 8107
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Wimborne, Dorset
I'm with Stuart on this, the rubber pipes under the inlet manifold always fail!
You have to remove the inlet manifold to change them, not a hard job to do....
/off topic/
Stuart, have you got those wing prices.....
You have to remove the inlet manifold to change them, not a hard job to do....
/off topic/
Stuart, have you got those wing prices.....
1 & 2 bed flats in Bournemouth areas, with parking
PM for details
PM for details
-
stuartgallafant
- E30 Zone Addict

- Posts: 4531
- Joined: Tue Mar 29, 2005 11:00 pm
- Location: Costa del Croydon
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
ANY fifteen year old high pressure rubber fuel pipe is due for replacement.
-
stuartgallafant
- E30 Zone Addict

- Posts: 4531
- Joined: Tue Mar 29, 2005 11:00 pm
- Location: Costa del Croydon

