aftermarket ecu
Moderator: martauto
-
mrgtsx
- E30 Zone Newbie
- Posts: 82
- Joined: Mon Nov 06, 2006 11:00 pm
hey guys sorry if this has been covered before but here goes. im after an aftermarket ecu to run my 320i, which has a 525e bottom end on it and am currently doing a turbo conversion. would a wolf 3d be good for my setup? thanks
-
E30Mark
- E30 Zone Team Member
- Posts: 8107
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Wimborne, Dorset
Peoples first choice here is megasquirt...
Welcome
Welcome
1 & 2 bed flats in Bournemouth areas, with parking
PM for details
PM for details
-
Turbo-Brown
- Boost Junkie
- Posts: 4705
- Joined: Tue Feb 15, 2005 11:00 pm
- Location: Aldershot, Hants
I'd say the biggest influence should be how easily you can get it properly set up.
So that means doing a bit of research into reputable rolling roads near you and then contacting them to see what they'd recommend / have experience with.
If you're happy to have a go yourself though, MS would be a great choice
Welcome to the forum
And start a thread on your project so we can all see how you're getting on
So that means doing a bit of research into reputable rolling roads near you and then contacting them to see what they'd recommend / have experience with.
If you're happy to have a go yourself though, MS would be a great choice
Welcome to the forum
And start a thread on your project so we can all see how you're getting on
)-
mrgtsx
- E30 Zone Newbie
- Posts: 82
- Joined: Mon Nov 06, 2006 11:00 pm
thanks guys! personally i havent heard much about megasquirt here in australia. wolf is pretty big here and alot of tuners about. im just after something that will give me the reliablility i need. still on the hunt for injectors. going for a pretty basic setup. trying to see how far i can go reliably. not trying to go overboard here i will post pics in the coming days. atm the car is bog stock never modifyed with 190,000km on the clock with log books so its a very well looked after car