smoked headlights
Moderator: martauto
-
spook
- League two here we come !!!
- Posts: 7583
- Joined: Sat Aug 19, 2006 11:00 pm
- Location: portsmouth
im thinking of getting some smoked headlights, anyone bought any from ebay or any links where i could get some good quality ones, cheers spook
-
Steviec
- E30 Zone Camper

- Posts: 1489
- Joined: Sun Oct 09, 2005 11:00 pm
- Location: Loughton, Essex
The ebay ones are just lenses on the outside and complete main beam units and good quality Hella, however, they are not designed for RHD vehicles and the seller obviously doesnt mention this.
To get mine to aim in the right direction (and not blind oncoming drivers) I had to fix the lense section to the bulb holder with tiger seal.
To get mine to aim in the right direction (and not blind oncoming drivers) I had to fix the lense section to the bulb holder with tiger seal.

<a><IMG></a>
-
c76jon
- E30 Zone Camper

- Posts: 1130
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: coventry
you can alter the direction of e30 headlights at the rear so they can be used lh and rhd
jon
jon

-
Simon
- E30 Zone Team Member

- Posts: 14939
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: South Wales
As John said, easy peasy...



-
dips346
- London Meets Main Man
- Posts: 3977
- Joined: Fri Jan 14, 2005 11:00 pm
- Location: heston/heathrow
didnt think the hella outers fit the bosch inner?
-
Steviec
- E30 Zone Camper

- Posts: 1489
- Joined: Sun Oct 09, 2005 11:00 pm
- Location: Loughton, Essex
The combination of bosch/hella is what prevents you from altering it from LHD to RHD.

<a><IMG></a>
-
Simon
- E30 Zone Team Member

- Posts: 14939
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: South Wales
The e-bay lenses are not RHD or LHD specific, you just need to fit them to some hella backs.
It's the internals that direct the beam not the lenses.
It's the internals that direct the beam not the lenses.

-
spook
- League two here we come !!!
- Posts: 7583
- Joined: Sat Aug 19, 2006 11:00 pm
- Location: portsmouth
how much should i pay for the complete units, some of the prices seem expensive, but if thats what i got to pay ie around 150 to 200 im gonna treat myself, thanks for your input chaps, i think i will put an add in the wanted section first, many thanks spook
-
Steviec
- E30 Zone Camper

- Posts: 1489
- Joined: Sun Oct 09, 2005 11:00 pm
- Location: Loughton, Essex
Hella backs are not the easiest to get hold of though. The only way you can screw the Bosch backs to the Hella fronts creates a LHD beam pattern (the notch is lined up to where it says LD on the light), the only way you can get it to line up with RD is by 'glueing them inplace'.

<a><IMG></a>
-
Richy325iTouring
- E30 Zone Addict

- Posts: 3490
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Newport SouthWales
smoke your own its cheaper

-
spook
- League two here we come !!!
- Posts: 7583
- Joined: Sat Aug 19, 2006 11:00 pm
- Location: portsmouth
i think your right richy, i will do a site search to see how its done, i have a spare set of lights so i might have a pop, cheers
-
Simon
- E30 Zone Team Member

- Posts: 14939
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: South Wales
Hella backs are easy to get hold of if you look in the right place, plenty of E34's in the scrappies these days 

-
Richy325iTouring
- E30 Zone Addict

- Posts: 3490
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Newport SouthWales
im about to do another set for me and a set for glenn
just need to get some more sheet steel at the right gauge for the cross hairs
just need to get some more sheet steel at the right gauge for the cross hairs

-
spook
- League two here we come !!!
- Posts: 7583
- Joined: Sat Aug 19, 2006 11:00 pm
- Location: portsmouth
have you done some yet richy,and have you got any pics
-
Richy325iTouring
- E30 Zone Addict

- Posts: 3490
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Newport SouthWales
done some on my old touring
only did the headlight and not the main veam
looked kinda cool though
simon has done some as well
and to be honest if they are done right and you use black sealent to seal the glass on you cant quite tell they are not hellas untill you look close
aslo make sure you paint the rim around the lights
only did the headlight and not the main veam
looked kinda cool though
simon has done some as well
and to be honest if they are done right and you use black sealent to seal the glass on you cant quite tell they are not hellas untill you look close
aslo make sure you paint the rim around the lights

-
spook
- League two here we come !!!
- Posts: 7583
- Joined: Sat Aug 19, 2006 11:00 pm
- Location: portsmouth
i dont wanna sound a complete twat but how do you smoke the actual lense
-
Richy325iTouring
- E30 Zone Addict

- Posts: 3490
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Newport SouthWales

cross hairs painted black for the main beam

and on teh smiley side its whats normaly silver thats black
these pics are whats left of my hellas from years ago
but the same is done to the bosch units to get the look

-
spook
- League two here we come !!!
- Posts: 7583
- Joined: Sat Aug 19, 2006 11:00 pm
- Location: portsmouth
thats why this forums so
people aways help 
-
mrLEE30
- E30 Zone Team Member

- Posts: 6589
- Joined: Tue Jan 18, 2005 11:00 pm
- Location: Sweating buckets in Bahrain
i also wrote a technical article, click on articles at the top of the page, click technical articles, click DIY smoked lights and follow the simple instructions, it as easy!!!thats why this forums so people aways help
and Hella main beam lights do fit on bosch backs, but the Hella are slightly bigger diameter and the location tabs are in the wrong place, so some creative filing is required. (iff you look closely at my lights you will see i have one bosch and one Hella main beam. The driving light lenses i have no idea about.
DIY smoked...:


-
Estoril-5
- E30 Zone Newbie

- Posts: 216
- Joined: Sun Dec 11, 2005 11:00 pm
- Location: Birmingham
you have broken the glass, so where did you get the replacement glass from?Richy325iTouring wrote:
cross hairs painted black for the main beam
and on teh smiley side its whats normaly silver thats black
these pics are whats left of my hellas from years ago
but the same is done to the bosch units to get the look
i have been looking everywhere and cant find just the glass, everyone sells the glass and the housing together.
cheers
-
Richy325iTouring
- E30 Zone Addict

- Posts: 3490
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Newport SouthWales
these are hella units
the glass was broken anywa and the other side lost
they were on my first e30
hence why i smoked my own bosch units last year n my touring
i just use thes as an example to show what parts need to be smoked
the glass was broken anywa and the other side lost
they were on my first e30
hence why i smoked my own bosch units last year n my touring
i just use thes as an example to show what parts need to be smoked

-
Estoril-5
- E30 Zone Newbie

- Posts: 216
- Joined: Sun Dec 11, 2005 11:00 pm
- Location: Birmingham
got any pics Richy?
-
Simon
- E30 Zone Team Member

- Posts: 14939
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: South Wales

-
Richy325iTouring
- E30 Zone Addict

- Posts: 3490
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Newport SouthWales
got no pics of the last lot
will have some in the next few days of the new batch
well mine and glenns
will have some in the next few days of the new batch
well mine and glenns

-
Estoril-5
- E30 Zone Newbie

- Posts: 216
- Joined: Sun Dec 11, 2005 11:00 pm
- Location: Birmingham
how do you split the lens from the housing?
i cracked a few lenses doing this
i cracked a few lenses doing this
-
maxfield
- Old Skooler

- Posts: 15185
- Joined: Sat Nov 26, 2005 11:00 pm
- Location: Mansfield
I think you have to put it in an oven to melt th glue ??? IIRC

-
Richy325iTouring
- E30 Zone Addict

- Posts: 3490
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Newport SouthWales
no you dontmaxfield wrote:I think you have to put it in an oven to melt th glue ??? IIRC
gently heat them with a heat gun to help get them apart
thn reseal with black sealant

-
bigkev
- E30 Zone Regular

- Posts: 612
- Joined: Wed Jul 27, 2005 11:00 pm
- Location: hibernating till summer
-
oze30
- E30 Zone Addict

- Posts: 4133
- Joined: Mon Oct 24, 2005 11:00 pm
- Location: Sydney
use the oven apparently! Need to do this to mine.. to clean the glass and to smoke my angel eyes too!
-
noney82
- E30 Zone Camper

- Posts: 1102
- Joined: Thu Apr 27, 2006 11:00 pm
- Location: manchester, stockport
iv just smoked mine and cant get my angel eye bulbs to fit in the smiley side any ideas anyone please
-
oguz327
- Captain Armco

- Posts: 4174
- Joined: Tue Oct 25, 2005 11:00 pm
- Location: Hampshire
Anyone done this in an oven?oze30 wrote:use the oven apparently! Need to do this to mine.. to clean the glass and to smoke my angel eyes too!
-
mattG
- E30 Zone Camper

- Posts: 1231
- Joined: Tue Jul 04, 2006 11:00 pm
- Location: Surrey
have a look at this threadoguz3001 wrote:Anyone done this in an oven?oze30 wrote:use the oven apparently! Need to do this to mine.. to clean the glass and to smoke my angel eyes too!
http://www.e30zone.net/modules.php?name ... ght=smoked
-
mrLEE30
- E30 Zone Team Member

- Posts: 6589
- Joined: Tue Jan 18, 2005 11:00 pm
- Location: Sweating buckets in Bahrain
after having done a few sets here it is much easier with a hot air gun, but there is no reason why they cannot be done in an oven, the idea is to get the glue hot and it becomes tacky rather then sticky thus enabling you to prise off the lens, my only concern with an oven is that you may melt the plastic backing of the driving light.
noney, i had the same problem, i filed down the locator tabs that hold the smiley backing to the light unit it self, this gets a bit more clearance under the lens, but normally brute force is required.
link to tech article..
http://www.e30zone.net/modules.php?name ... hhella.htm
mrlee
noney, i had the same problem, i filed down the locator tabs that hold the smiley backing to the light unit it self, this gets a bit more clearance under the lens, but normally brute force is required.
link to tech article..
http://www.e30zone.net/modules.php?name ... hhella.htm
mrlee

-
mattG
- E30 Zone Camper

- Posts: 1231
- Joined: Tue Jul 04, 2006 11:00 pm
- Location: Surrey
had read of the tech article very good
might give it a go myself
-
karaokebykris
- E30 Zone Newbie

- Posts: 217
- Joined: Sun Jul 30, 2006 11:00 pm
- Location: Staffs
What gauge sheet steel are you guys using for this? Where can i get sheet steel? Got an old bootlid i could chop bits out of but i am guessing that is a bit too thick!
It is meaningless to ask; which is real, 'real' or imaginary? It is simply a matter of which is the more useful description
"One valuable thing to remember is that light tavels faster than sound, some people appear quite bright until they speak
"One valuable thing to remember is that light tavels faster than sound, some people appear quite bright until they speak



